Clore Automotive    Lenexa, KS 66215
Oct 26, 2010 Model No. 3001 has heavy-duty air compressor, for delivery of shop air, that features auto shut-off at adjustable, preset pressure. Multipurpose unit features 5 ft retractable jumper cables, for access to starting points on vehicles of all shapes and sizes, and pneumatic wheels to maneuver it in any terrain or shop environment. Contained in rugged, high-impact case, unit includes 10 A automatic battery charger and EZ View(TM) Control Panel with gauges viewable from distance during service.

Phoenix Contact    Harrisburg, PA 17111 0100
Oct 25, 2010 Running on 24 Vdc, nLC-055 base station offers 4-function math capability - add, subtract, multiply, divide - and integrated analog inputs to increase Nanoline® controller flexibility. Base station can also perform percentage operations and features 2 analog inputs with 12-bit resolution, 8 digital inputs, 2 high-speed counters, built-in RTC and retentive memory, and 4 relay outputs. Product is compatible with Nanoline expansion modules for GSM, Ethernet, I/O, RS-232/-485, and USB.

Chromalox    Pittsburgh, PA 15238
Oct 25, 2010 Pipe-mounted model DTS provides temperature control, power switching, and alarm indication for heat trace systems used in process temperature maintenance or freeze protection applications. Programmable from -40 to +485°F, Div 2 hazardous area-compliant controller houses heating cable power connection and monitors pipe or ambient temperature with 3-wire, 100 Ohm platinum RTD. It provides digital indication of process set-point and temperature as well as high/low and sensor failure alarms.

Atmel Corporation    San Jose, CA 95131
Oct 22, 2010 Housed in 7 x 7 mm QFN48 package, Model ATA6614 combines Atmel LIN System Basis Chip ATA6630 including LIN transceiver and 5 V voltage regulator, and Atmel ATmega328P with 32 k Flash memory in single package. Device is fully compatible with QTouch® library solution to allow button, slider, and wheel touch applications to be implemented with same device, which communicates these touches using available LIN protocol stacks over LIN network.

ii2P LLC    Southlake, TX 76092
Oct 22, 2010 Based on MULTOS smart chip with anti-tampering capabilities and cryptographic co-processor, ii2P MyVault(TM) v2.X stores, retrieves, and auto-populates login credentials at any intranet or Internet site. System safeguards private information such as account numbers, healthcare information, and other sensitive data. It includes provision to populate new Web form information via form fill capability and ability to split credentials for those sites which require separate entry of ID and Password.

Syrris Ltd.    Royston SG8 5HW  United Kingdom
Oct 20, 2010 Atlas Hotter Hotplate, suited for use with Atlas automated synthesis system, features temperature control module that allows automated reactions to occur at temperatures up to 350°C. When used in combination with Atlas Lithium system, hotplate enables automated reactions in wide range of round bottom flasks and vials, using dry baths such as stacking dry baths, triple dry baths, and vial baths that remain cool to touch.

APG Cash Drawer, Inc.    Minneapolis, MN 55421-1012
Oct 20, 2010 Ready for connection to Thin Client POS system via Ethernet network, NetPro(TM) Ethernet Cash Drawer interface is identified with its own Network IP address and can report cash drawer status and access events in real time. Interface offers remote Help-Desk support for service and troubleshooting of cash drawer operation in distributed retail locations. Cash access and disconnection event data is time and date stamped for monitoring and detecting unusual events.

Emerson Process Management    Pleasanton, CA 94566
Oct 19, 2010 In addition to displacement sensor technology for measuring liquid level or level of interface between 2 liquids, FIELDVUE(TM) DLC3020f uses digital FOUNDATION fieldbus communication protocol to deliver diagnostics and alerts that help optimize performance. Digital communication also lets users configure, calibrate, and test DLC3020f using AMS Suite software or 475 Field Communicator. Model DLC3020f stores up to 30 logs and can directly replace pneumatic, analog, or HART® transmitters/controllers.

ABM Drives Inc.    Milford, OH 45150
Oct 19, 2010 Combining 2.2-22 kW induction motors and multi-stage planetary gearboxes with ratios from 100-2,000, Yaw Drives maintain nacelle positions to wind to maximize energy generation. Units have output torque ratings from 2,000-50,000 Nm with max output of 100,000 Nm. Providing steady performance for up to 20 years, Pitch Drives position setting angle for each blade to wind. Both are suitable for ambient temperatures down to -40°C.

Schneider Electric    Palatine, IL 60067-7399
Oct 19, 2010 Combining individual branch circuit remote control and metering functions into one lighting panelboard enclosure, Powerlink® EM system enables users to verify performance of control system via energy savings by circuit, zone, space, panel, or complete system. It also provides historical trends and generates reports to allocate costs according to actual energy used. Smart metering is accomplished using PowerLogic® Branch Circuit Power Meter (BCPM).

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Oct 18, 2010 With Wireless Remote Hand and Foot Controls, welders can reposition remote around work area without having to untangle cords. Foot control, designed specifically for TIG welding, allows operator to adjust amperage at point of use. Designed for Stick, TIG, MIG, and Flux Cored welding, hand control lets operator adjust parameters for joint configurations, electrodes, and wire types/sizes at point of use. Both eliminate extensions, cord failures, and associated downtime.

ABB Ltd.    Zurich CH-8050  Switzerland
Oct 15, 2010 Ranging from 0.5-30 hp and 0.37-22 kW, Model ACS355 supports control of standard AC induction motors and permanent magnet motors. Unit offers 4 degrees of environmental protection, as well as features such as torque memory, mechanical brake control, and pulse counting. Safe Torque Off function keeps drive energized when motor has been stopped and ensures there is no torque on machine. Supporting plug-in type fieldbus adapters, drive enables communication with common automation protocols.

SCL Elements    Montreal, QC H2S3L5
Oct 15, 2010 Featuring embedded EnOcean transceiver and EnOcean-to-BACnet gateway, CAN2GO(TM) Variable Air Volume Controller supports bidirectional communication and allows total wireless control of energy harvesting end-devices within end-to-end BACnet system. Fully programmable device includes onboard pressure sensor that meets VAV application requirements. Controller can communicate with other CAN2GO controllers wirelessly, through wired Ethernet/IP network, or via chain-linked CANbus serial bus.

HBM, Inc.    Marlborough, MA 01752 3014
Oct 14, 2010 Used for monitoring press-fitting processes or implementing switch checks, respectively, MP85A FASTpress and MP85A-S EASYswitch utilize software interface for connection to IPM process data management software. Controllers can be seamlessly integrated into appropriate system via IPM interface so that acquired production data can be directly transmitted to quality assurance server for visualization and archiving. In addition, data can be observed in real-time via web browser.

Meta Vision Systems Inc.    Montreal, QC H4S1M5  Canada
Oct 14, 2010 Smart Laser Probe is noncontact, seam-tracking system that senses and compensates for any deviation from nominal weld path. Image processing hardware and software are located inside sensor head, while Ethernet backbone communicates between sensor head, touchscreen display, and multifunction I/O board. Operating in temperatures from -40 to +55°C, unit has sampling rate of 30 fps at megapixel camera resolution and can work with reflective metals such as aluminum and stainless steel.

JH Technology, Inc.    Sarasota, FL 34233 2432
Oct 13, 2010 With high-speed Option HS, DIN-rail mount JH5000 Series provides 95% complete response in 1 ms. Transmitters offer variety of input styles, including DC, thermocouple, RTD, strain gauge/load cell, and potentiometer/resistance. Equipped with input/output isolation, quick-check output LEDs, and unpluggable terminals, units support math functions such as add/subtract, multiply/divide, and square root.

Techno Linear Motion Systems    New Hyde Park, NY 11040
Oct 11, 2010 Supplied complete with drives, power supply, I/O, enclosure, and software, Model iMC-P1 provides eight 24 Vdc inputs and eight 24 Vdc outputs. Rugged enclosure includes Start, Stop, and Reset buttons. Step size function can be changed, via dip switches, from full to half to micro-step. Able to perform linear and circular interpolation, controller includes PalPC motion control software and is suited for pick-and-place, dispensing, assembly, routing, and welding applications.

Divelbiss Corp.    Fredericktown, OH 43019
Oct 08, 2010 Featuring watertight enclosure with gland connectors, HEC-HMI Harsh Environment HMI is available as HMI-only or HMI with PLC in same enclosure. Device operates over -40° to +80°C temperature range from 8-32 Vdc input. It includes backlit, 2- or 4-line LCD as well as 4 horizontal pushbuttons, labeled as function keys, and 5 buttons arranged in compass pattern for use as joystick input. Network communication is accomplished via CAN port or 2nd serial communication port.

Helix Wind, Corp.    Poway, CA 92064
Oct 08, 2010 Employing smart grid technology, Wind Turbine Monitoring System (WTMS) keeps track of performance and uptime pertaining to Helix Wind Savonius turbines and connected power electronics. Hardware offers interface that is accessible online via web browser, and web-based software monitors, records, and reports variety of performance metrics in real-time, including wind speed, turbine output, inverter metrics, grid frequency, and other variables.

DIRAK    Chantilly, VA 20151-1220
Oct 07, 2010 Consisting of housing and latch wedge, Model 1-103 eliminates metal-to-metal friction, preventing panel surface from being scratched by rotation of cam during closing and opening process. Snap Hook holds Slide Shoe securely in place on cam and prevents it from turning or becoming loose during application life cycle. Model 1-103 can be applied to any 35 and 45 mm single or 3-point cam with standard 3 mm ramp.