Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Mar 01, 2011 Evaluation modules TPS54060EVM-590 and TPS7A30-49EVM-567 help designers generate cleanest possible (low noise) positive and negative voltage rails with which to power analog circuits. Respectively, modules are based on 60 V TPS54060 SWIFT(TM) inverting buck-boost switcher and TPS7A30/49 low-noise high-PSRR LDOs. Both kits are intended to help remove switching noise and increase performance of data converters, op-amps, clocks, and other signal chain devices.

DE-STA-CO Industries    Birmingham, MI 48009
Mar 01, 2011 Offering precise control on rotary and linear systems, CAMCO® RSD is compatible with industry-standard servo motors, providing logic to handle uneven motion or displacement, change in direction, or different products running on same machine. Maintenance-free unit features universal mounting and offers ratios of 4:1-18:1 in single stage. Output options include large flange with thru hole; 32 mm dia shaft; external shrink disk for 30 or 40 mm shaft; and internal shrink disk for 30 mm shaft.

Fortrans Inc.    Wendell, NC 27591
Feb 28, 2011 Poli-Cut pH control system lowers pH of process water produced in concrete polishing, grinding, and cutting operations so that water can be safely discharged without polluting environment. Self-contained, automated machine utilizes CO₂ gas that is diffused and injected into wastewater to lower pH to 7.0. Mounted on 5 in. polyurethane swivel casters, product has 200 gal tank with 2 in. bottom drain; 2-speed pump, and is able to treat 1,500-3,000 gph.

Eaton Corp.    Cleveland, OH 44114
Feb 28, 2011 Designed for OEMs, XV and XP Series are available in variety of screen sizes, ranging from 3.5-15 in. with both serial and Ethernet ports. Units come equipped with Visual Designer(TM) software, which facilitates design and implementation of GUI solutions. In addition to basic monitor and control, software allows interfaces to communicate with PLCs, web clients, and databases. With XV/XP Series, users can create web-based applications that help diagnose machines faults and prevent downtime.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Feb 28, 2011 Supplied in 4.4 x 6.5 x 0.9 mm package, LM21212-1 and LM21215 serve high-performance FPGAs, ASICs, and MPUs. Both integrate high- and low-side FETs and deliver peak efficiency over 97% from 5 V input to 3.3 V output. While LM21212-1 delivers up to 12 A continuous output with synchronizable switching frequency from 300 kHz to 1.5 MHz, LM21215 provides fixed 500 kHz switching frequency and resistor-programmable current limit that allows up to 15 A of continuous output.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 25, 2011 Featuring 6 user-selectable pressure units and 3-color LED display, Series MDPC provides pressure ranges from -100 to 100 kPa or -100 to 1,000 kPa with NPN, PNP, analog voltage, or current output control modes. Parameter copy function enables parameters to be copied to other MDPC pressure controllers, while key lock mode prevents unnecessary changes to parameters. Controller is suited for high-tech electronics, food packaging, and automatic assembly applications.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Feb 22, 2011 Featuring integrated high-side and low-side FETs, Models LM21212-1 and LM21215 are suited for FPGAs, ASICs, and microprocessors used in low-voltage applications. Model LM21212-1 features output current up to 12 A with synchronizable switching frequency, while Model LM21215 provides resistor-programmable current limit, allowing up to 15 A of continuous output current. Housed in 4.4 x 6.5 x 0.9 mm packages, both operate over input voltage of 2.95-5.5 V and produce output voltage down to 0.6 V.

TRIATEK    Norcross, GA 30093
Feb 22, 2011 Featuring touchscreen technology, Model HMS-1650L displays both numerical data as well as general fume hood status via background color. Unit indicates if fume hood is in safe, warning, or alarm status depending on if background is green, yellow, or red, respectively. In addition, controller can display face velocity, sash position, temperature, date, and time on single screen. Suited for LON networks, Model HMS-1650L can be deployed as either controller or monitor.

Exar Corp.    Fremont, CA 94538
Feb 22, 2011 Optimized for 12 V input voltage rail, yet equally capable of operating from 5 V rail, PowerBlox(TM) XRP7665 is suited for set-top boxes, telecom equipment, and computing peripherals as well as point-of-load conversions. Synchronous PWM step-down converter has input voltage range of 4.75-18 V, operates at fixed 340 kHz switching frequency, and reaches 93% efficiency in Green SOIC package. Output voltage can be adjusted down to 0.925 V, with 2.7% accuracy, via 2 external resistors.

Seiko Instruments U.S.A., Inc.    Torrance, CA 90505
Feb 22, 2011 Housed in 0.8 x 0.8 x 0.4 mm package, S-1312/1313 Series features ultra-low 20 µA/0.9 µA current consumption and ripple rejection of 75 dB. Thermal shutdown capability automatically protects circuit when junction temperature reaches 150°C and restarts regulation when it drops to 120°C. With outer lead design that minimizes failure rates related to circuit board flexing and mechanical shock, ICs are suited for smart phones, cell phones, digital cameras, and notebook PCs.

TRIATEK    Norcross, GA 30093
Feb 22, 2011 Supplied in .625 in. deep controller chassis, stainless steel FMS-1650-T consists of full color touchscreen unit that can be installed on any wall using included mounting bracket. Flush-mounted unit simultaneously displays pressure, temperature, humidity, and air changes on one screen. When coupled with external pressure sensor, product can provide pressure readings or flow down to 0.0001 in. H2O. Control outputs, based on measured inputs, utilize fully programmable control loops.

Samson Controls    Baytown, TX 77520
Feb 18, 2011 Valve booster is adjustable and lead-sealed, as well as pressure-balanced to provide stable output even under fluctuating pressure conditions. Signal pressure is transmitted with defined hysteresis, without loss, and emits minimal noise. Only functional parts come into contact with instrument air, but exhaust air port also can feature protection from weather or other environmental factors. Product is targeted for use with valves that have large pneumatic actuators.

Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Feb 18, 2011 Developed for Chip Interface H, Hotplate Adaptor allows control over internal temperatures of microfluidic chips without any disruptions to fluid flow. It is compatible with Linear Connector 4-way, 1.6 mm tubing and microfluidic chips with 22.5 x 15 mm footprint. Holding chip securely in position, product lets users pre- or post-heat fluids using integrated tube heater. It operates up to 100°C and comes with removable lid that closes and 22 mm dia glass viewing window.

Vecow    Taipei   Taiwan
Feb 16, 2011 With 32 nm micro-architecture, turbo boost, and hyper-threading technology of Intel Core(TM) i7/i5 platform, Model EC-3000 can process measurement and control applications in ambient temperatures from -20 to 60°C. All-in-one fanless box PC includes up to 5 GigE ports and 2 eSATA ports for surveillance/security applications. Supporting VGA+DVI/HDMI dual display, isolated DIO, and PCI-104 bus expansion, unit is also suited for automated traffic enforcement, industrial automation, and digital signage.

Cole-Parmer Instrument Co.    Vernon Hills, IL 60061
Feb 15, 2011 Suitable for fluid metering applications, Masterflex® L/S® offers precise speed control and digital display of rpm. Reversible motor, capable of driving 2 or 4 pump heads, enables user to purge tubing before or after pumping, and LED indicators confirm motor direction. Achieving flow rates of 0.6-3,400 mL/min, drive offers remote control capability via 4-20 mA or 0-10 V input signal.

Solar Air Systems    Avon, MA 02072
Feb 11, 2011 Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.

Linear Technology Corp.    Milpitas, CA 95035
Feb 11, 2011 With input voltage of 3.8-36 V, Model LT3688 is suited for load dump and cold crank conditions found in automotive applications. Dual 1.2 A, 280 mV internal switches deliver up to 800 mA of continuous output current from each channel at output voltages as low as 0.8 V, while Burst Mode® operation provides quiescent current of 115 µA. Housed in 24-pin 4 x 4 mm QFN or thermally enhanced TSSOP package, IC includes watchdog timer and offers programmable switching frequency of 350 kHz to 2.2 MHz.

For-A    Cypress, CA 90630
Feb 11, 2011 With interface, HVS-350HS HD/SD 1.5 M/E digital video switcher can control Abekas Mira Production Server. Users can view list of clips, set in/out points, and then control clip playback from up to 4 independent video channels though switcher's HVS-350U control panel or HVS-35GUI remote control software. HVS-350HS-Mira combination is suitable for live sports instant replay, as well as concerts, events, and studio applications.

BriskHeat Products(BH Thermal Corp.)    Columbus, OH 43201
Feb 11, 2011 Compatible with wide range of heaters and applications, SDC Series combines factory-installed J or K type thermocouple sensor, standard connector, and on/off digital controller. Unit features temperature range of 32-999°F with accuracy of ±0.6% of span ±1 digit. Measuring 5.5 x 4.25 x 1.75 in., bench-top controller operates from 120 Vac or 240 Vac power input and provides 10 A fused output.

Mini-Circuits    Brooklyn, NY 11235
Feb 10, 2011 Supplied in 4.5 x 3.1 x 1.2 in. plastic case, model USB-I/O-4D2R is compatible and 32-/64-bit operating systems. Its 4 TTL/LVTTL adjustable digital output lines are buffered through noise reduction and voltage adjustment circuits, creating outputs that can be adjusted from 2.7-5 Vdc. Other features include 2-channel opto-isolated relay outputs, each delivering 24 Vdc/0.375 A; 2.7 ft USB cable; and CD with GUI and API-DLL com object.