Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Oct 27, 2011 Paired with EnPak Mechanic Series power system, EnPak® Hydraulic Tool Control allows simultaneous use of mechanic truck's hydraulic crane and 5 or 8 gpm hydraulic tools without switching between crane and circuit controls. HTC provides common hydraulic power distribution location for plumbing to tools and crane circuit, with flow rates to accommodate 5, 8, or 10 gpm hydraulic tools, or two 5 gpm tools. With EnPower technology, engine outputs only as much rpm as is needed to perform job.

Protean Electric    Troy, MI 48084
Oct 26, 2011 Occupying unused space behind 18 in. road wheel, In-wheel Motor Electric Drive(TM) System produces up to 110 hp and can be fitted to conventional rear axles. Each system features self-contained inverter controller as well as regenerative braking. Creating hybrid or plug-in hybrid configuration from existing conventional trucks, system offers advantages for front-, rear-, or 4-wheel drive fleet vehicles that run on gas, diesel, or gaseous fuels such as CNG.

Nippon Pulse America, Inc.    Radford, VA 24141
Oct 26, 2011 Measuring 43.34 x 43.43 x 18.4 mm, Model NPAD10BF offers up to 1/16 microstepping on 2-phase tin-can, linear, and hybrid stepper motors. Unit accepts lead wires and can also be mounted directly to back of NEMA 17 hybrid motors using 2 pre-machined mounting holes. Operating on input voltage of 12-30 Vdc, board features peak output current of 1.2 A/phase, isolated input signals, on-board switching voltage regulator, and reset for sequence and dis-enable.

Imsys Technologies AB    SE-194 61 Upplands Väsby   Sweden
Oct 25, 2011 Based on Imsys native mode IM3910 Java processor, SNAP Stamp(TM) contains full TCP/IP stack, CLDC environment, Web/FTP/Telnet servers, device drivers for I/O interfaces, and command line interface. Java applications run natively on processor without compilers or delays from Java byte code interpretation; users can copy Java class or jar files over and run them. Rubus(TM) RTOS is also standard, in addition to fail safe flash file system with wear leveling and power fail recovery.

Rockwell Automation    Omaha, NE 68137
Oct 24, 2011 For process applications, Allen-Bradley ControlLogix 5570 Series maximizes amount of information that can be exchanged between control and supervisory layers. Controllers provide high-speed axis and trajectory planning, making them suitable for synchronizing complex motion applications. Each unit seamlessly integrates through Ethernet/IP and SERCOS network interfaces. For discrete applications, controllers provide range of memory options from 2-32 MB.

Summit Microelectronics, Inc.    Sunnyvale, CA 94085
Oct 21, 2011 Housed in 5 x 6 mm QFN package, Models SMB220/SMB221 feature onboard MOSFETs that supply up to 10 A/20 A output current. Input voltage is +4.5 to +16 V and output voltage is +0.5 V to VIN, accurate to ±1.5% over load/line/temperature. With serial digital interface and on-board non-volatile memory, devices can be configured during development and re-programmed in system by host software. Output voltage is digitally programmable in 10 mV steps up to 2.5 V and 20 mV steps up to 5.0 V.

Maxon Precision Motors, Inc.    Fall River, MA 02720
Oct 17, 2011 With bandwidth required for motor current/torque control, ESCON 36/2 DC 4-quadrant PWM servo controller provides range of functions with configurable digital and analog I/O. Drift-free, dynamic speed behavior enables speed range of 1-150,000 rpm, and supported operating modes include closed/open loop speed controller and current controller. Other functions include ability to enable/disable power stage depending on direction of rotation, or use speed ramps for acceleration/deceleration.

A10 Networks, Inc.    San Jose, CA 95131-1578
Oct 14, 2011 Models AX 1030/3030/5200-11 deliver application-focused capabilities for Server Load Balancing, IPv6 Migration, and Virtualization projects, respectively. All include 64-bit Advanced Core Operating System with scalable shared memory parallelism architecture. Respective throughput and max power consumption rates for AX 1030 and 3030 are 7.5 Gbps and 155 W and 27 Gbps and 188 W. With 2RU form factor, AX 5200-11 offers 4.5+ million Layer 4 CPS; 16, 10 Gb ports, and 660 W full load power consumption.

ICS Electronics Corp.    Pleasanton, CA 94588
Oct 14, 2011 Intended for controlling test instruments, 488.2V4 driver applies to ICS' 488-USB2 USB-to-GPIB Controller, 488-LPCI PCI GPIB Controller, and to 488-PXI PXI GPIB Controller cards. Integrated 64-bit DLL lets user run program completely in 64-bit address range instead of converting to 32-bit DLL. Able to be installed on Windows XP/Vista/7 OS, driver automatically detects OS version and installs correct lower level drivers and utilities.

Yale Materials Handling Corp.    Greenville, NC 27834
Oct 12, 2011 Combining touchscreen display with cylindrical lockset, stand-alone inTouch® Locks are suitable for data centers, hospitals, and financial institutions. Instead of buttons, locks feature digital display that awakens when touched. Interactive, voice-guided system facilitates programming and user information updates. Granting access with entry of 4- to 12-digit pin code, locks include Easy Mode that accommodates up to 9 user identities and Advanced Mode that accommodates up to 1,000 identities.

Despatch Industries    Lakeville, MN 55044
Oct 12, 2011 Focal Point(TM) fully controls curing process and documents all process information, providing traceability and validation of part quality on all Despatch composite curing ovens. System offers precise process control with lead-lag temperature control and recipe editor for programming temperature and vacuum profiles. During curing cycle, run status and all process values can be monitored from display panel. Also, remote modules can be added and communicate with oven PLC via Ethernet.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Oct 10, 2011 Helping reduce plant operating costs and extend boiler life, automated Model 61 Boiler Blowdown Control System provides continuous control of surface blowdown rate to optimize commercial and industrial boiler water electrolytic conductivity. System includes CS10 conductivity sensor in rack mounted panel, sediment trap, sample cooler, temperature gauge, sample control valve, and safety relief valve. System operates from 0 to +100°C and 0-75 psig.

ABB Robotics, Inc.    Auburn Hills, MI 48326
Oct 06, 2011 Fully configured ArcPack(TM) Lean 1410 includes IRB 1410 robot, IRC5 Compact controller, Fronius TransSteel 3500 power supply and wire feeder, and Tregaskiss 500 Amp air-cooled welding torch. Six-axis robot, specially designed for arc welding, features 5 kg handling capacity with supplementary 18 kg load capacity on upper arm for application equipment. With positional repeatability of ±0.025 mm, IRB 1410 delivers optimal welds in tight, restricted locations.

Montalvo Corporation    Gorham, ME 04038
Oct 06, 2011 Compatible with various inputs, U4 ensures accurate tension control from full roll to core and does not require additional idler rollers. Soft start, anti-coast, taper tension, inertia compensation, and diameter alarm features are supplemented by remote operation capability, unwind and rewind functionality, diameter display (English or metric), programmable diameter alarms, and surface or flush mount installation. Users can save as many as 9 tension parameters for immediate recall.

ERICSSON INC.    PLANO, TX 75024
Oct 05, 2011 Suited for space-critical applications, 12 A BMR462-SIP (BMR4622002) and 20 A BMR463-SIP (BMR4632002) come in 20.8 x 7.6 x 15.6 mm and 26.3 x 7.6 x 15.6 mm SIPs, respectively, and deliver power densities of 38 and 33 W/cm². Both devices, based on digital-core controller combined with MOSFET technology and built-in energy-optimization algorithms, offer 66 W of power, 4.5-14 V input, and typ power efficiency of 97.1% at 5 V input, 3.3 V output, and half load.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Oct 05, 2011 Suited for production machines involved in jobs from single-axis positioning to complex synchronous applications, Simotion D445-2 DP/PN and D455-2 DP/PN deliver scalability and flexibility needed for changing demands. PLC, motion control, and advanced technology functions are standard, and integrated drive control is based on Siemens Sinamics S120 drives. Capable of supporting up to 128 axes of motion, controller provides onboard Profinet and high-speed I/O interfaces.

MKS    Andover, MA 01810 2449
Oct 03, 2011 Providing stand-alone process control platform, Model ECM2 offers real-time OS, interlock board for safety I/O, and on-board analytics, from standard SPC to advanced model-based control algorithms. Module mixes analog, digital, temperature, serial, and safety I/O, providing programming via standard programming languages, including Matlab, C++, and Ladder Logic. Processor accelerates communication over multiple protocols, while advanced diagnostics facilitate troubleshooting.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Oct 03, 2011 Housed in 0.8 x 1.48 x 0.15 mm PicoStar(TM) package, Model DRV201 features pulse width modulation and linear current regulation support for compact cameras, smartphones, and mobile devices. Advanced ringing compensation feature enables lens setting time of 10 ms. Using I2C configuration for flexible selection of operation mode, driver includes open and short-circuit detection/protection, thermal protection, and under-voltage lockout.

Moore Industries International, Inc.    North Hills, CA 91343
Sep 30, 2011 With addition of EMM Interface Module, NET Concentrator System® comes standard with Ethernet port and dual, independent MODBUS RTU ports. One or both MODBUS RTU ports can be configured as MODBUS master ports, allowing NCS to poll other MODBUS RTU slaves with network polling functions. Providing real-time signal gateway between field or factory floor and control strategies, NCS offers 20-bit input, 18-bit output, and ambient temperature range of -40 to +185°F.

Rotork Controls, Inc.    Rochester, NY 14624
Sep 30, 2011 Pakscan P3 modular control system offers processing plants capability to establish wireless communication network with Rotork valve actuators throughout their facility. Wireless capability operates on 2.4 GHz frequency and has line-of-site operating range of ~70 m indoors and 1,000 m outdoors. Built-in Web pages let control-room operators access and extract important asset management information without manually downloading information in field.