Mokon    Buffalo, NY 14207
Feb 13, 2007 Designed for circulating water and heat transfer fluid temperature control systems and portable chillers, 1/16 DIN controller offers dual LCD display that indicates set point and actual fluid temperature. Configurable unit features PID overshoot protection with self-tuning capabilities, push button operation, NEMA 4 faceplate for washdown capability, and parameter password security for tamper-proof operation. It accepts Thermocouple, RTD, and mA inputs.

United Electronic Industries    Canton, MA 02021
Feb 09, 2007 Equipped with embedded computer running Linux OS, self-contained UEIPAC Series includes 2 Ethernet ports, serial port, SD Card interface, inter-PAC sync interface, and either 3 or 6 slots for I/O boards. Over 20 I/O boards are available such as analog I/O, digital I/O, counter/timer, quadrature encoder, serial I/O, CAN bus, and ARINC-429 interfaces. Applications include unmanned vehicles, environmental controllers, test stand controllers, and hardware-in-the-loop simulators.

Zaber Technologies Inc.    Richmond, BC V7E2J1
Feb 08, 2007 T-JOY3 controls 3 independent axes of motion when daisy-chained with motorized devices. As stand-alone controller, joystick is suited for motorized x-y or x-y-z stage applications. Interface includes 5 buttons pre-programmed with functions including: home all axes, save current position, and move to saved position. Buttons can also be programmed to trigger action by computer, such as execution of complex instruction sequence. Entire daisy-chain can be controlled through USB or RS232 port.

Tuthill Controls    New Haven, IN 46774
Feb 08, 2007 Featuring non-contact sensor design, TCH Series industrial hand controls are suitable for any application that uses conventional contact potentiometer hand controller. Units can control electric vehicles and electro-hydraulic systems, as well as internal combustion engines in non-vehicle applications, especially in harsh environment where normal sensors are unsuitable.

Allegro MicroSystems Inc.    Worcester, MA 01615
Feb 08, 2007 With output drive capacity of up to 35 V and ±2 A, Model A4983 operates bipolar stepper motors in full, half, quarter, eighth, and sixteenth step modes. Chopping control selects slow or mixed decay mode, and synchronous rectification control circuitry provides power dissipation during PWM operation. A4983 is supplied in 5.0 x 5.0 x 0.9 mm QFN package with exposed thermal pad. Package is lead-free with 100% matte tin plated leadframe.

austriamicrosystems AG    Premstatten   Austria
Feb 07, 2007 Supplied in 5-pin SOT23 package, AS1353 and AS1356 operate from 2.5-5.5 V and come in preprogrammed output voltages from 1.5-3.6 V, regulated to 1% accuracy. Model AS1353 features 30 µVrms between 10 Hz and 100 kHz, allowing use of 1 µF ceramic output capacitor. With power-supply rejection ratio of 57 dB @ 100 kHz, AS1353 fulfills noise requirements for wireless applications. Additionally, AS1356 offers power good signal that indicates when output voltage is within tolerance of 5%.

Honeywell Power Supplies    Northford, CT 06472
Feb 07, 2007 Intended for commercial, industrial, and institutional applications, 7100 Series single-loop, analog addressable FACPs can support up to 198 or 396 devices. With complete networking capabilities, each panel can be connected using single pair of wires. Circuitry and software allow panels to read specific sensitivity level of every individual sensor and compensate for changes due to age, dust, and other environmental factors.

Rockwell Automation    Milwaukee, WI 53204
Feb 07, 2007 With 300 W to 3 kW power range, Allen-Bradley Kinetix 2000 Servo Drive seamlessly integrates with Allen-Bradley Logix controllers, servo motors, and actuators, simplifying machine design, commissioning, and operation. One power rail serves as mounting and connecting system, while digital fiber-optic link facilitates multi-axis integrated motion and eliminates up to 18 discrete wires/axis.

Laurel Electronics, Inc.    Costa Mesa, CA 92626
Feb 07, 2007 Designed to isolate and retransmit dc voltage or current signals, Model TA-PR transmits full scale dc signals from 200 mV to 600 V or from 2 mA to 5 A. Housed in 35 mm DIN rail case 22.5 mm thick, it is powered by 95-240 Vac ±10% or optionally by low voltage 8-28 Vac or 9-37 Vdc. All electrical connections are via detachable screw clamp connectors. Two isolated solid state relays rated 120 mA at 125 Vac or 240 mA at 150 Vdc are optional for alarm or control.

Panasonic Electric Works Corporation of America    New Providence, NJ 07974
Feb 06, 2007 Available with black or metallic silver bezel colors, 4,096-color Model GT32T is 5.5 in. (320 x 240 dots) touch screen with built-in SD card slots (max 1 GB) as well as Ethernet and USB ports for communication and updating/saving screen data. Product has depth of 15.4 in. and also offers built-in voice play back. Also available is monochrome type GT32M 5.7 in., 320 x 240 touch screen.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 05, 2007 Available in ½, ¾, and 1 in. sizes, Series ZV1 and 3ZV1 feature direct-coupled actuator design. They control flow of hot and cold water and are suited for use with temperature controllers and thermostats in HVAC systems. Units come in 2-way and 3-way constructions and are spring-return, normally closed. Incorporating manual overrides, valves operate from supply voltages of 120, 24, or 230 Vac.

Vicor Corp.    Andover, MA 01810 5424
Feb 02, 2007 With efficiency of 97% and matched with 94% VTM unit, P045F048T32AL high power (greater than 1,100 W/in.³) 320 W PRM non-isolated regulator enables direct 48 V-to-load with 91% efficiency. It provides controlled Factorized Bus distribution voltage for powering downstream VTM current multipliers and is designed for 48 V power applications such as servers, telecom, and ATE. Unit also incorporates Adaptive Loop compensation feedback.

Control Co.    Houston, TX 77258 8307
Feb 01, 2007 Programmable in .01-99.99 sec, 1-9,999 min, or 1-9,999 hr intervals, Model 1 Walkaway(TM) Turn-off Controller counts up and turns any piece of equipment off at end of set time period. Model 2 Walkaway Repeat Turn-on/Turn-off Controller, programmable for 1-99 sec/min/hr intervals, counts up and turns any piece of equipment on for programmed time and off for different programmed time. Repeat feature continues cycling until manually stopped. Both models are NIST Traceable®.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Feb 01, 2007 PICkit(TM) Serial Analyzer enables design engineers to interface with circuits embedded deep within serial systems using any Windows®-based PC. It features 28-pin demo board with PIC16F886 Mid-Range 8-bit microcontroller, and GUI software allowing communication between PC and several industry-standard serial protocols on microcontroller tested, including I2C(TM), SPI, and USART. Source code and MPLAB® IDE integrated development environment are also included.

Pickering Interfaces    Wobum, MA 01801
Feb 01, 2007 Software-configurable Model 40-612 supports 1- or 2-pole configurations with isolation relays. Configurations vary from single-pole, 128-way MUX to 8 banks of 8-channel, 2-pole MUX. Supporting 2-pole configurations, Model 40-613 also features software-controlled architecture that allows configurations from 2-pole, 64-way MUX to 16 banks of 4-channel MUX. Both use electromechanical relays rated for 220 Vdc/250 Vac and 2 A hot or cold switching.

Delta Tau Data Systems    Chatsworth, CA 91311
Feb 01, 2007 Advantage 900M CNC allows use of non-proprietary MACRO (Motion and Control Ring Optical) ring, available in fiber-optic (100-Base-F) and twisted-pair electrical cable (100-Base-T) formats. Offering PC front end with real-time servo performance, control combines operator console with ability to interface up to 32 axes of distributed motion hardware in 16 coordinate systems via fiber or RJ-45 communications ring. Transmission rate updates every link on ring at frequencies over 40 kHz.

austriamicrosystems AG    Premstatten   Austria
Jan 31, 2007 Optimized to extend operating times in battery-powered portable equipment, 150 mA Models AS1353 and AS1356 feature voltage drop of 60 mV at 150 mA output current, going down to 20 mV at 50 mA. Enable pin with turn-on time of 150 µs allows system-level dynamic power management. With operating input voltage from 2.5-5.5 V, units are available in variety of pre-programmed output voltages between 1.5 and 3.6 V. Housed in 5-pin SOT23 package, ICs operate from -40 to +85°C.

EZAutomation    Bettendorf, IA 52722
Jan 31, 2007 Available in 4-, 6-, 8-, and 12-slot versions, EZPLCs can handle up to 2,048 I/O points by communicating through RS485 via Modbus RTU or through Ethernet port via Modbus TCP/IP. Each slot handles up to 8 I/O points, and distributed PLC scheme enables products to be operated from master PLC. Also included, EZPLC Programming Software allows all EZPLCs in network to be programmed from any Ethernet port in network or RS232 port on PLC designated as master.

MRV Communications, Inc.    Chatsworth, CA 91311
Jan 31, 2007 With LX v5.0 software, unlimited number and combination of LX 4000T Series servers can be combined into single management entity, facilitating network planning and troubleshooting. Servers support TACACS+ protocol, which eases integration into Cisco environments and provides granular control over command execution. Support for SFTP protects operating system updates along with log and configuration file information via secure SSH encrypted connection.

Linear Technology Corp.    Milpitas, CA 95035
Jan 30, 2007 Providing 2 voltage rails from single input, 500 mA synchronous buck regulator, Model LTC3541 delivers up to 95% efficiency, while integrated VLDO(TM) offers low noise. Device generates output voltages as low as 0.8 V from buck regulator and 0.4 V from VLDO, enabling it to power microcontrollers. Housed in thermally enhanced, 3 x 3 mm DFN package, Model LTC3541 features 2.25 MHz constant frequency operation and input voltage range of 2.7-5.5 V.