Toyoda Machinery USA Inc.    Arlington Heights, IL 60004
Jun 07, 2007 Allowing users to store data up to 64 different work pieces in resident memory, Model GC50 CNC grinder control is composed of hardware and software with integrated PLC. Product comes with automatic work speed, feedrate calculation, photo-enhanced maintenance instructions, and moveable pop-up windows for running position location. On-screen touch pad eliminates need for alpha-numeric keypad and makes it possible for operator to work without memorizing instruction manual.

Bosch Rexroth Corp., Corporate Headquarters    Hoffman Estates, IL 60192-3707
Jun 06, 2007 Suited for drive requirements using 3-phase induction motors, IndraDrive Fc devices can be installed without PC using 2 different operator modules. Standard Model supports parameter-focused operation, while Deluxe model's start-up has 6-language clear text display with no need for documentation. Units operate in linear V/f characteristic curve or sensor-less current vector control modes, and come in 4 different sizes and voltages of 200-230 and 400-480 V with 0-400 Hz output frequency.

Cotta Transmission Co., LLC    Beloit, WI 53511
Jun 06, 2007 Designed for use in extreme conditions, Model PD2266 heavy-duty pump drive can operate wide range of driven applications. It can be designed with 4-8 pump stations, and input horsepower can be divided unequally between stations (maximum 1,800 hp per station), totaling 3,000 hp for unit. Additionally, product's modular approach allows for SAE, DIN, or custom pump interface on any of unit stations.

IEPC Corp.    Huntington Beach, CA 92649
Jun 06, 2007 Model VB400 lighting control system utilizes solid state electronics with on-site, remote, and aggregate Web-based controls for HID lighting. Designed for efficient energy management, system features electronic ballast, microprocessors for flow regulation, dimming and timing controls, automatic maintenance scheduler, and built-in photo cell for automatic daylight harvesting. System is compatible with all 200-400 W bulbs.

GE Multilin    Markham, ON L6E1B3  Canada
Jun 06, 2007 Available in compact and rugged design, Model MM300 offers protection, control automation, metering, communications and advanced diagnostics. It can simultaneously communicate using Modbus (Serial or Ethernet) and either DeviceNet or Profibus DP protocols. Continuous monitoring coupled with single-click access to device and system status information can alert operators to potential conditions that could lead to critical process interruption.

Danfoss VLT Drives    Loves Park, IL 61111
Jun 05, 2007 VLT® AutomationDrive VFDs are available in 75-100 hp range at 380-480/500 Vac, which covers NEMA 1 and 12 rated enclosures. Used to monitor, analyze, and control production, they can be programmed to adapt to operations at various points in line with built-in Smart Logic Controller or optional MCO PLC. Controller enables drive, motor, and application to work together through preprogrammed chain of events or by monitoring peripheral devices.

Hardy Process Solutions    San Diego, CA 92123 1825
Jun 05, 2007 Measuring 3 in deep, HI 4050 incorporates 4 independent analog outputs that can be configured to any instruments parameter. It uses Modbus TCP/IP network communications and offers rate-of-change weight monitoring capability that lets flow rate of material be monitored on scale in gain- or loss-in-weight applications. Modular controller also includes WAVERSAVER® vibration compensation, C2® electronic calibration, Secure Digital-based memory card, and diagnostics/troubleshooting tools.

Intelligent Motion Systems, Inc.    Marlborough, CT 06447-1334
Jun 05, 2007 With input voltage of 12-75 Vdc, MForce PowerDrive delivers per-phase output current of 7 A peak, 5 A RMS, with optional programmable motion controller or variable speed controller. Enclosed package also includes integrated heat sink and pluggable, locking connectors. Operating from -40 to +85°C, driver accepts up to 20 resolution settings from full to 256 microsteps/full step, with CANopen communications optional. Interface cables speed prototyping, parameter setup, and configuration.

MAGPOWR    Oklahoma City, OK 73114
Jun 05, 2007 Designed to prevent surprise problems, Smart Brake includes pad wear indicators that call attention to brake pads only when they need to be changed, eliminating common practice of changing all brake pads at regular intervals, regardless of wear. Heat detection features identify signs of overheating, and can automatically activate fans to dissipate heat, without operator intervention. Guard design dissipates heat, while allowing access to brake pads.

Autonics USA, Inc.    Vernon Hills, IL 60061
Jun 05, 2007 Designed for refrigeration machines, TC3YF offers simultaneous controls for compressor, defroster, and evaporator. Auto/manual defrost function optimizes cooling efficiency of freezer by removing ice and frost. Measuring 77 x 72 x 63 mm, controller has display range of -40 to -212°F with NTC thermistor input or -148 to -212°F with RTD input. Standard ON/OFF output relay is available for compressor, and optional output relays are offered for defroster or evaporator.

AC Technology Corp.    Uxbridge, MA 01569 2001
Jun 05, 2007 Suitable for food and beverage industries, SMVector Drives with NEMA 4X enclosure are protected against foreign objects such as dust, as well as harmful effects of water and corrosion. Units offer input voltage ranges from 120 Vac, 1-phase to 600 Vac, 3-phase with RS-485/Modbus, CANopen, and DeviceNet communication options. NEMA4 enclosure options are available with up to 3 hp ratings.

Broadcom Corp.    San Jose, CA 95110
Jun 05, 2007 Suited for high volume server designs, NetXtreme II BCM57710 single-chip, dual-port converged network interface controller (C-NIC) enables simultaneous processing of network, storage, processor clustering, and management traffic on chip while enabling convergence of different traffic types over single Ethernet fabric. It is designed for bidirectional line rate performance and converges TCP, iSCSI, RDMA, and remote management traffic over 10 GbE with PCI Express® interface to host.

Parker Boiler Co.    Los Angeles, CA 90040
Jun 04, 2007 Providing capacities from 3,500-51,750 lb/hr, Tray and Spray Feed Water Deaerators reduce residual oxygen level in make-up water to below 7 ppm or .005 cc per liter. Carbon dioxide is virtually zero, optimizing boiler feed water and minimizing chemical usage. Deaerators incorporate electronic features and have few moving parts.

Control Resources, Inc.    Littleton, MA 01460
Jun 04, 2007 Measuring 1.5 x 5 in., SmartFan Vortex I2C fan speed control is compatible with fans that offer open collector or voltage source tach pulses, and monitors tach pulses from up to 4 fans with maximum current rating of 5 A at 55°C or less. It accepts fan speed commands (including on/off) and gives individual pass/fail fan status via I2C interface. Fan speed can also be based on temperature. I2C interface provides temperature readings from on-board thermistor and EEPROM storage.

Siemon Co., The    Watertown, CT 06795
Jun 04, 2007 Featuring front facing full-length hinged door, Model VPC-12 protects, conceals, and organizes high-density vertical patch cord routings between rack systems. Designed for being mounted or side-stacked between adjacent racks, Vertical Patching Channel (VPC) cable management system has capacity of 1,400 category 5e or category 6 UTP cords in front-access channel and additional 1,800 in rear-access channel. Unit also supports 360 category 6A UTP cords in front and 470 in rear.

LSI Logic Corporation    Milpitas, CA 95035
Jun 01, 2007 Offered as turnkey board solution, SS9135 provides OEMs with means to implement 2.5 in. SATA drives in enterprise-class storage arrays, including SAS and Fibre Channel-SATA (FC-SATA) infrastructures, for near-line and tiered-storage applications. Solution is based on SS1350 Active-Active Multiplexer, which enables single-ported SATA drives to connect like native dual-ported drives. Card also offers drive power control, PHY control, and diagnostics for SATA drives.

IEPC Corp.    Huntington Beach, CA 92649
May 31, 2007 Featuring solid-state electronics, Model VB400 enables automatic, manual, and remote control to provide HID lighting that is energy efficient and can be integrated into demand-response scenario. It replaces magnetic ballasts, timers, relays, control panels, photo cells, and intensive wiring required to connect each fixture to all external parts. Featuring plug-and-play design, Model VB400 enables use of 200-400 W bulbs no matter what manufacturer, HID type, or input voltage.

T. L. Fahringer Co.    Tampa, FL 33619
May 31, 2007 Designed to minimize number of broken and returned blades, AC-200 Two-Stage Weld/Anneal Control ramps blade up to desired temperature during first stage and maintains temperature throughout second stage. User can make adjustments to settings or stop cycle at any time during process. Able to control voltage during welding process, control allows for more heat during weld cycle, yielding consistent welds and preventing degradation and failure of mechanical switching.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
May 30, 2007 Requiring supply current as low as 40 mA during operation, UCD9240 controllers can digitally manage up to 4 independent digital-control loops and up to 8 phases. Products implement digital PWMs with 250 psec resolution and are fully configurable via GUI for monitoring, control, and management of DC/DC point-of-load power conversion. Also included, Fusion Digital Power(TM) peripheral performs full-digital loop control while supporting switching frequencies to 2 MHz.

Schneider Electric    Palatine, IL 60067-7399
May 30, 2007 Operating up to 20 hp at 480 Vac, TeSys® U-Line LUS Motor Starter combines power and control functions with modular structure for design flexibility. Self-diagnosis capabilities provide direct access to motor starter information, such as pre-alarm, motor data display, remote reset, differentiated error display, and memorization of last 5 errors. Motor current and control voltage are determined by control unit selected, which can be snapped into power base by hand without wiring.