Animatics Corp.    Santa Clara, CA 95054
Dec 01, 2009 Suitable for OEM applications, compact SmartMotor(TM) model SM2337DT incorporates servo motor, amplifier, and motion controller into same integral frame. It delivers up to 200 oz-in. of peak torque while maintaining as much as 60 oz-in. of continuous torque.

Animatics Corp.    Santa Clara, CA 95054
Nov 30, 2009 Combining controller, amplifier, and encoder into Brushless DC Servo Motor(TM), SmartMotor SM2315 is based on Animatics Motion Control Chip, which handles all processing functions, including PID loop, trajectory generator, user program execution, I/O control, and all communications over 3 serial channels simultaneously. Featuring die-cast aluminum housing, machine wound stator, and molded magnet, system delivers up to 30 oz-in. of continuous torque and operates up to 10,000 rpm.

MadgeTech    Warner, NH 03278
Nov 30, 2009 Placed directly in oven, thermocouple-based OctThermoVault provides complete temperature profile of entire process. Each thermocouple has its own cold junction compensation reference point, and each channel can store up to 500,000 readings. Able to withstand temperatures up to 662°F for 25 minutes, profiler has programmable reading rates as fast as 4 Hz. If probe is removed during logging, device detects change and software will annotate data to indicate open thermocouple.

Animatics Corp.    Santa Clara, CA 95054
Nov 30, 2009 Intended for high-volume motion control applications, OEM Series of SmartMotors(TM) feature NEMA 23 and 34 frame dimensions. Units are based on Animatics Motion Control Chip, which handles all processing functions, including PID loop, trajectory generator, user program, execution, I/O control, and all communication over 3 serial channels simultaneously. Able to stand alone or operate as part of network, systems deliver up to 150 oz-in. continuous torque and nominal speeds in excess of 4,000 rpm.

Southco    Concordville, PA 19331 0116
Nov 27, 2009 Self-contained EA-P1 facilitates transition from mechanical to electronic access while increasing security. LED and audible beeper provide feedback during software-free programming, and programmable output timing supports multiple access arrangements. Able to accommodate multiple users via support for up to 5 unique PIN codes and 9,999 proximity cards, access management solution also includes relay output that integrates directly with electronic locks.

Hardy Process Solutions    San Diego, CA 92123 1825
Nov 27, 2009 Measuring 3 in. deep, Model HI 4050 is available with ControlNet(TM) network interface, which allows transfer of time-critical application information at 5 Mbit/sec in redundant, deterministic, and predictable manner. Information can be transmitted to up to 98 additional nodes at distances of 250-5,000 m. In addition to WAVERSAVER®, which eliminates effects of vibration, controller includes C2® electronic calibration, SD-based memory card, and IT® for system diagnostics.

RAE Systems    San Jose, CA 95134
Nov 27, 2009 Used with AreaRAE toxic gas and radiation sensor networks, RDK Ruggedized Host consists of laptop computer with embedded wireless modem and pre-configured software. It communicates in real-time with up to 64 remote monitors for logging of sensor data and can also interface with third-party software. Embedded modem provides network with 2 mile range, and controller can push data over secure web browser when connected to Internet for real-time use by remote specialists.

Maple Systems Inc.    Everett, WA 98204
Nov 25, 2009 Powered by 400 MHz processor, 4.3 in. Model HMI5043N can be mounted horizontally or vertically to accommodate any space requirement. Unit includes 128 MB of memory, client USB port, and serial port as well as 65,000 color widescreen TFT display with 480 x 272 pixel resolution. With capacity for multiple screens, pop-ups, alarms, trend graphs, animations, and recipes, HMI can be configured to command equipment, replace analog lights and gauges, or operate as control panel.

Sensocon, Inc.    Lakeland, FL 33801
Nov 25, 2009 Used to measure positive, negative, and differential pressure (DP) as well as air velocity/flow, Series A6 includes 2 SPDT relays and programming menu that enables full configuration of variables. Programming is done via OLED display, which also shows users-defined variables during normal operation, and Opti-Link(TM) communications are also supported for IR programming. Optional 4-20 mA output can be digitally scaled to meet unique application requirements, and standard accuracy is 1%.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Nov 24, 2009 Designed to meet requirements of food processors, rugged, waterproof, programmable 6- or 8-channel Multipaq21 data logger records product or air temperatures and transmits data to computer while traveling through oven. IP67-rated unit features operating temperature of up to 185°F, is fully USB compatible, and also incorportes serial port for data transfer. Linkage with Datapaq Insight Software provides data for HACCP and other documentation needs.

Online Development Inc.    Knoxville, TN 37920
Nov 24, 2009 Using cATM-BLY90 Module, users can migrate legacy ABB Bailey Infi 90 or Network 90 DCS to ControlLogix PACs from Rockwell Automation. Once system data is available within ControlLogix PAC, Rockwell Automation applications such as FactoryTalk View SE can be used for visualization of data, alarming, and other functions. Module can process up to 5,000 blocks of data, and supports all existing DCS block functions including exception reporting, supervisory control, and system status monitoring.

Jtag Technologies Inc    Stevensville, MD 21666
Nov 20, 2009 DataBlaster JT 37x7/PCIe offers sustained test clock speeds of up to 40 MHz and uses Enhanced Throughput Technology(TM) to support memories with data-bus widths from 1 bit to 64 Kbit. Unit includes 4 synchronized test access ports (TAP) that support multiTAP test targets or gang programming of 4 TAP targets. It features QuadPOD(TM) with high-speed signal conditioning, logic threshold adjustments, and cable delay compensations. Flash image buffer memory is expandable to 128 Mbits.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Nov 20, 2009 Supplied in 8-pin SOIC package, off-line green mode PWM controller UCC28610 minimizes space while providing high efficiency in power supply applications with rated output power from 15-65 W. Frequency and peak current modulation creates efficiency levels of 85% at full load, while cascaded MOSFET configuration lends to line surge ruggedness. In addition to 125 mW no-load power consumption, features include over-current and overload protection.

Online Development Inc.    Knoxville, TN 37920
Nov 19, 2009 Installed in Rockwell Automation controller or used as standalone module, eATM Appliances enable connection of plant floor data with enterprise and plant-wide computer systems via JMS connection technologies in addition to traditional databases. Units are available with adapters that connect to specific business systems and controllers, such as IBM WAS JMS, Red Hat JBoss JMS, JBoss Community JMS, and IBM WMQ. Database Adapters are available for DB2, MS SQL, My SQL, and Oracle.

GE Intelligent Platforms    Charlottesville, VA 22911
Nov 18, 2009 VersaMax® Micro Plus is available with v4.0 firmware, which offers OnLine Programming feature that lets user edit and download logic to PLC without stopping it. Of 8 supported Modbus TCP channels, one is configured for Modbus TCP Client and remaining are used for Modbus TCP servers. Thermocouple and RTD expansion units can support High Accuracy mode with 16-bit resolution. Also, security settings minimize hacking concerns.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Nov 17, 2009 Designed for compressors rated up to 32 Arms, RSBS Series Single-phase Plug-and-Play Soft Start limits amperage demand, which peaks when single-phase scroll compressors are starting. Integrated current limit feedback ensures inrush current reduction to less than 40 Arms for compressors rated to 25 Arms and less than 45 Arms for compressors rated to 32 Arms. Complying with EMC Class B requirements, RSBS Series offers optional auxiliary alarm relay output for interfacing alarms to external panel.

IEI Technology Corp.    Taipei Hsien 221  Taiwan
Nov 17, 2009 Compatible with EM or Mifare cards and tags, RISC-based ACT-457A is all-in-one controller and proximity reader with Windows® CE v5.0 pre-installed. It features 5.7 in. color touchscreen with 640 x 480 resolution and can be set-up and programmed without additional on-site computer. Along with built-in RFID reader, other features include RMI Alchemy(TM) chip with Media Acceleration Engine, 2W speakers, bi-directional microphone, and 300K pixel webcam.

Siemon Co., The    Watertown, CT 06795
Nov 17, 2009 Optimizing data center space, VersaPOD Data Center Cabinet Solution is available with end of row Zero-U patching and cable management options. End of row vertical panels mount between cabinet's corner posts and side panels, allowing four 1U patch panels or fiber enclosures to be mounted vertically. These panels may be mounted on both ends and in front and rear of cabinet, providing 16U of mounting space. To facilitate routing, cable management fingers can be mounted alongside each Zero-U panel.

HASCO Hasenclever GmbH + Co KG    Ludenscheid D-58513  Germany
Nov 16, 2009 Designed to control temperature in 2-128 zones, Model Z1240 utilizes PID control technology that is accurate to 1/10°C. Integrated diagnosis program detects wiring errors and thermocouple breaks, while fuses protect control from mains voltage at sensor inputs caused by short circuits. Through automatic comparison with last used output levels, deviations are displayed, informing operator of imminent malfunctions, corrosion, soiling, or possibility of heating failure.

austriamicrosystems AG    Premstatten   Austria
Nov 16, 2009 Operating from 1.2-3.6 V supply, AS1371 LDO can function at input voltages down to 1.2 V. It offers dropout voltages of 20 mV at 100 mA and 80 mV at 400 mA as well as 50 µA quiescent current at maximum load. Unit is available with preprogrammed output voltages between 0.6-3.3 V, programmable in 50 mV steps. Featuring -40 to +85°C operating temperature range, it also includes overtemperature/overcurrent protection, under-voltage lockout, and low battery detection.