Newport Corp.    Irvine, CA 92606
Mar 18, 2010 Offering stability for use with TO-can laser diodes and butterfly packages, Model 6100 provides precision current and temperature control for laser diode applications. Its 500/1,500 mA current supply range, along with 32 W temperature controller, suits demanding laboratory tasks. Bench top instrument incorporates DSP-based PID control and ultra-stable current control to achieve less than 0.001°C temperature stability and 1.3 µA (rms) ripple, respectively.

Microsemi    Irvine, CA 92614
Mar 18, 2010 Supplied as compact multi-chip module (MCM) with built-in power functionality, NX9415(TM) is designed for step-down DC/DC converter applications. It converts 8-22 V input down to as low as 0.8 V with output current of up to 5 A. In addition to 2 MHz controller and 2 MOSFETs with 31 mW RDS(on), product features internal 5 V regulator that provides voltage supply to internal logic and driver circuit and allows for single supply operation. Module operates from 200 kHz to 2.2 MHz.

E Instruments International LLC    Langhorne, PA 19047
Mar 17, 2010 Featuring ABS shock-proof housing with IP54 dust protection, portable Model AMI300 supports variety of wireless probes. Unit monitors CO, CO2, temperature, humidity, airflow using vane and hot wire, air velocity using pitot tube, and current/voltage. Suitable for all IAQ applications, tester includes speed tachometer, blue LCD display, min/max/hold/unit selection, and data storage with software capabilities.

Interphase Corp.    Dallas, TX 75234
Mar 16, 2010 Featuring Freescale(TM) PowerQUICC III(TM) processor, iSPAN® 5639L PCI Express® Multiprotocol Communications Controller provides intelligent network interfaces for application platforms that need to connect to TDM/ATM networks. Unit supports up to 124 SSL low speed links, 4 high speed links, or 124 media channels. By providing 4 T1/E1/J1 interfaces on 4 standard RJ45 connectors in low-profile card, device eliminates need for NEBS-incompatible Y-cables.

Wolf Robotics    Fort Collins, CO 80525
Mar 16, 2010 Slim designed Wolf Cell Control offers complete robotic cell control from one location from anywhere in world using WolfLink(TM) remote systems support. Numerous control screens control welding process including system diagnostics, overall equipment effectiveness, automatic cycling, service, and alarms.

Okazaki Manufacturing Company    Rhondda Cynon Taff CF15 7AF  United Kingdom
Mar 15, 2010 Intended for chemical reactors and desulphurisation catalyst bed reactors, AerOradial multipoint temperature assemblies offer maximum number of temperature measurement points through single process connection or entry nozzle. AerOpak mineral insulated cables, offering single-tip measurement or multiple sensing points within single stem, enable full, 3D temperature profiling for safe control of process. Assemblies can be positioned through side, top, or bottom of reactor vessel.

ABB Inc.    Auburn Hills, MI 48326
Mar 15, 2010 Pre-wired and pre-tested, Model DCS800-EP includes all required peripheral components on space-efficient back panel, ready to be mounted into industrial enclosure, facilitating procuring, mounting, and wiring of individual system components. Drive includes AC and DC fusing, AC contactor, and control transformer. With 65 kA short-circuit current rating, Model DCS800-EP meets UL 508A, is suitable for retrofit applications, and can replace Reliance Electric® FlexPak® 3000.

STMicroelectronics    Lexington, MA 02421
Mar 12, 2010 Supplied as bare die with all features necessary to control Optical Finger Navigation (OFN) module or optical joystick, VD5376 helps users interact with features of portable electronics. Imaging array detects precise finger movements to produce corresponding change in cursor position on screen, while power management capabilities help extend battery life of host device. IC features light source driver circuitry and is compatible with laser, IR, or optical LEDs.

Technosoft S.A.      Switzerland
Mar 11, 2010 Based on MotionChip(TM) DSP technology, ISD860 can drive 12 A continuous and 31 A peak currents at supply voltages from 12-72 Vdc, with PWM of 20 kHz, for motion jobs requiring embedded intelligence, networking capabilities, and servo performance control. This 136 x 84 x 26 mm product embeds motion controller, drive, and PLC functionality and works in single-axis, multi-axis, or standalone configurations. It controls brushless, DC, or linear motors up to 860 W continuous/2.2 kW peak.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Mar 11, 2010 Designed to independently control up to 64 LEDs requiring 20-80 mA, 1031-PhidgetLED-64 Advanced comes with 12 Vdc, 2 A power supply and LED cables. Unit features max forward voltage of 5 V, brightness changes at 700 updates/sec, and LED On/Off at 3,000 updates/sec. Plug-and-play unit is programmed using API supported under Windows 2000/XP/Vista/CE, Mac OS X, and Linux. Users can write programs in Visual Basic, VB.NET, C#, C/C++, Flash/Flex, Java, Labview, Matlab, ActionScript 3.0, and Cocoa.

GOEPEL electronics LLC    Austin, TX 78759
Mar 10, 2010 SCANBOOSTER/PCI-DT boundary scan controller supports JTAG/Boundary Scan tests, VarioTAP® emulation tests, and in-system programming for PLD/FPGA as well as Flash serial EEPROM devices. Product consists of PCI plug-in card, external Test Access Port (TAP) transceiver unit, and 2 separate TAPs that can be programmed independently. Additional resources include 32 voltage-level-programmable, dynamic parallel I/O; two ADC/DAC channels; external trigger signals; and 3 static I/O.

Rabbit Semiconductor    Davis, CA 95616
Mar 10, 2010 Rabbit 6000 combines wireless communications and industrial control features on single chip. It includes 10/100 Base-T Ethernet, secure 802.11a/b/g, and PWM, pulse position modulation, and quadrature decoder outputs that enable industrial motor control. A/D converter with 12-bit resolution measures sensor data. Product also features USB 2.0 full-speed host and 2 flexible interface modules that enable protocol support such as CANbus, Secure Digital, and Secure Digital Input Output.

ERICSSON INC.    PLANO, TX 75024
Mar 10, 2010 Digitally controlled and rated at 20 and 40 A, respectively, BMR450 and BMR451 point-of-load (POL) voltage regulators can write as well as read data via power management bus (PMBus). Read-back affords range of monitoring options, such as output-voltage and current, temperature, and power-good, while write-mode makes it possible to program output voltage and modify it as function of load condition. Users can adjust current limits and warning levels and remotely turn modules into sleep-mode.

Clore Automotive    Lenexa, KS 66215
Mar 10, 2010 Featuring high capacity PROFORMER battery, 2,000 A, 12 V Jump-N-Carry JNC950 features industrial grade Hot Jaw(TM) clamps that penetrate even corroded battery terminals. Extra heavy-duty polyethylene case withstands tough work environments and 46 in. #2 cables facilitate optimal positioning. Onboard automatic charger can provide up to 24 hr/365 day continuous charge. High output unit is suited for diesel shops, fleet maintenance, industrial, and marine applications.

Advanced Anti-Vibration Components - AAC    New Hyde Park, NY 11040
Mar 08, 2010 Metric isolators of V11Z48MPSB... Series are maintenance-free air spring vibration mounts that use elasticity of air as isolator, which acts as soft spring. Products have no moving parts and can handle range of loads by changing inner air pressure. They can also be used as actuators in tensioning devices. While bellows are made of synthetic rubber that incorporates reinforced cord and wire, clamping rings and upper/lower plates are of stainless steel.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Mar 04, 2010 IDENTControl Compact is Ethernet controller with compact housing that lets users connect all read/write heads, even with different frequency ranges, to single control interface. Supporting all common Industrial Ethernet protocols, unit includes 2 Ethernet connectors with built-in switch, which allows for multiple Ethernet topologies including linear, star, and ring. Quick disconnects enable mounting in panel or in field. All IDENTControl read heads are supported.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Mar 04, 2010 Environmentally sealed using silicone conformal coating, ESS408 is suited for use on any joystick generating 0-5 V or 0.5-4.5 V reference signal, and can be configured to CAN open, J1939, or basic CAN protocols. It features 4 analog inputs for up to 4 axes of proportional control, 8 digital inputs for up to 8 pushbuttons, and 2 digital outputs for up to 2 lights or alarms. Board suits industrial vehicle applications, including bucket trucks, truck mounted cranes, and construction vehicles.

Divelbiss Corp.    Fredericktown, OH 43019
Mar 02, 2010 Based on PLC-on-a-chip technology, HEC-4000-E-R Harsh Environment Controller features sealed, watertight enclosure with pluggable connectors and extended operating temperature of -40 to 80°C. I/O includes four 8-32 Vdc inputs and 6 digital outputs rated to 4 A with automatic over-current safety and programmable status monitoring. Programmed via Divelbiss EZ Ladder software, controller establishes network communication via CAN port or optional serial communication port.

Digital Monitoring Products    Springfield, MO 65803
Mar 01, 2010 With Version 205 software, XR100/XR500 Command Processor(TM) Panels provide In Touch(TM) messaging features that let users control alarm systems via SMS text commands from cell phones or web browser. Functionality also lets users instantly know when event occurs on their security system, and users can also arm and disarm system, control outputs, retrieve system status, and perform other functions from cell phone. Each command received by panel is acknowledged via return SMS message.

National Instruments Corp.    Austin, TX 78759-3504
Mar 01, 2010 Model NI cRIO-9023 controller has 533 MHz PowerPC processor, while NI cRIO-9025 has 800 MHz processor as well as dual Ethernet ports for network programming, communication, and expansion I/O. Both products work with CompactRIO reconfigurable chassis, which include FPGAs that are programmed using NI LabVIEW 2009 graphical system design platform. Controllers are available with conformal coating for protection of components and circuitry against harsh conditions.