National Attachments Incorp.
Gorham, ME 04038
Sep 08, 2006 Extreme Service Stump Harvester can rip, pry, clean, split, and sort any species of wood using combinations of quenched and tempered multi-alloy Swedish steels. Designed to endure decades of tough applications, wood-handling tool produces uniformly cut product and offers operator-sided knife positioning to promote visibility. Tool can remove dirt and rocks from stumps to enhance the grinding process with massive grubbing tines suited for in-place harvesting.

Caterpillar, Inc.
Peoria, IL 61629
Aug 23, 2006 Comprised of 7 models, M-Series are powered by emissions-compliant Cat® C-Series engines with ACERT(TM) Technology. Interior design promotes lines of sight to drawbar, circle, and moldboard (DCM) as well as snow wing area. Along with all-wheel-drive option, graders feature electro-hydraulic control system, variable horsepower, and direct-drive countershaft transmission. Models range in power from 125-500 hp and feature blade lengths from 12-24 ft.

Newstripe, Inc.
Aurora, CO 80011
Aug 11, 2006 Featuring 100% transfer efficiency, Rollmaster 5000(TM) does not create any over spray, enabling use within 3 in. of obstacles. Integral peristaltic pump, driven by battery-powered, 12 V gear motor, squeezes paint through delivery hose so that paint does not come into contact with any pump component. This, along with disposable paint roller and hose, results in cleanup times of less than 5 min. Noiseless unit does not generate gas or exhaust fumes and comes with on-board charger.

Newstripe, Inc.
Aurora, CO 80011
Aug 07, 2006 Equipped with 4 hp Honda engine and 5 gal low-pressure tank, Bantam XL uses adjustable spray gun for 2-6 in. wide lines. Wetted section of spray gun disassemblies for cleanup, and unlike airless spray guns, entire gun can be rebuilt in field. Featuring dry weight of 125 lb, unit includes four, 10 in. pneumatic wheels for maneuverability.

Gerdau Ameristeel Corporation
Tampa, FL 33607
Jul 10, 2006 Evaluated per ASTM A944, ZBAR(TM) consists of A615 or A706 reinforcing steel bars combined with 2 corrosion barriers, each with uniform thickness. Manufacturing process involves applying thermal-bonded zinc inner layer and thermal-bonded polymer outer layer to conventional reinforcing steel bar. Resistant to chloride-induced corrosion, ZBAR(TM) can be substituted for any reinforcing steel product.

Cattron-Theimeg, Inc.
Sharpsville, PA 16150 1198
Jul 06, 2006 Operating at range to 1,000 ft (line-of-site) and weighing 11 oz, Pump Boss II transmitter and receiver offers ergonomically designed, patented elastomeric keypad and fail-safe Stop feature that drops all relays within 5 sec in case of signal loss. Enclosed in IP 66/67 compliant water-tight enclosure, device features Auto Link(TM) to allow receiver to learn frequency channel and address of spare transmitter.

Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
Jul 06, 2006 Automatic and mechanical 4-DCM, able to handle 1, 2, 3, or 4 drums in straight-line configuration, has total capacity of 8,000 lb. Equipped with Parrot-Beak® clamping system and cushioned belt-cradles, product is able to load 80 steel, plastic, or fiber drums into truck or container in under 15 min. Options include non-sparking components, EE/EX ratings, Quick-Claw® fork locking systems, and Steel-It® FDA-approved stainless steel coating.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Jun 20, 2006 Made from engineered metal components, silicone, and impregnated foam, Seismic Joint System (SJS) consists of 2 or more pre-assembled, horizontal joints that are adjacent to heavy-duty, extruded aluminum spline. Spline acts as receptor for attachment of heavy-duty cover plates to bear vehicle loads. Joints are suited for use in applications requiring sound dampened seismic and large movement joints such as in parking decks, stadiums, and floors.

Bishop-Wisecarver Corporation
Pittsburg, CA 94565 0209
Jun 16, 2006 HDRT Heavy Duty Ring Slide and Track System combines HepcoMotion PRT ring track system with HDS slide system. Single edge rings are offered from 20.15-65.19 in. dia, with optional integral gear. Single piece slides of up to 4 m can be butted together to create unlimited lengths, and double edged ring segments and straight sides combine to form closed circuits and curved paths. Fixed center and bogie carriages are both available in 64 or 95 mm dia.

Newstripe, Inc.
Aurora, CO 80011
Jun 08, 2006 Designed for small, occasional jobs, SCOTSMAN Striper features four 8 in. wheels, loop handle with control lever, and pressure gauge. Adjustable spray head paints 2-6 in. lines, while instantaneous shut-off valve located at spray head eliminates dripping. Built from all welded steel with 4 gallon industrial-grade epoxy-coated tank, striper is available as basic unit or can be upgraded with modular power packs.

Henke Manufacturing Co.
Leavenworth, KS 66048
May 31, 2006 Featuring 5 x 5 x 3/8 in. tubular reversing table, Tube Table Snowplow has 6-spring tripping mechanism that allows moldboard to pass over roadway obstacles and automatically reset to plowing position. Shock absorbing rubber block limits trip travel for overall safety of operator and equipment.

Car-O-Sell
Old Hickory, TN 37138
May 30, 2006 Featuring platform with self-contained pullout ramps and hydraulic lift that elevates 2 ft 0 in. to 6 ft 8 in. from platform surface to ground level, Car-O-Sell Tower accommodates vehicles up to 8,000 lb. Platform is 14 ft x 6 ft 9 in. and spindle rotates clockwise or counterclockwise on Timkin(TM) bearings. Safe Stop Technology immediately stops rotation should anything enter path of platform. Powder coat protected steel parts available in black, white, red, yellow, or blue.

Newstripe, Inc.
Aurora, CO 80011
May 09, 2006 When applying mandated low-VOC traffic paints, Rollmaster(TM) produces crisp line edges with no overspray. It incorporates adjustable pump spring tension, which accelerates priming and compensates for any pump hose wear. Product pumps paint directly from 1 gal can to application roller and uses peristaltic (squeeze) pump so that paint does not contact any pump component. Design also includes polymer pump rollers and bronze pump bushing.

Kastalon, Inc.
Alsip, IL 60803 1810
May 02, 2006 Mounted directly to upright face of fork utilizing adhesive primer and industrial grade VHB tape, Fork-Kushions® protect against marring, denting, and other forms of damage. Product comes in 5 styles: Ultra Soft for fragile handling, Soft for lightweight material, all-purpose Medium, as well as Cut-Resistant and Maximum-Impact for extremely heavy objects such as steel coils.

Stone Construction Equipment, Inc.
Honeoye, NY 14471
May 01, 2006 Powered by 110 hp diesel engine and heavy-duty hydraulic components, 10-ton Rhino® 66X is offered in smooth or padfoot configurations as well as in combination smooth drum roller with optional padfoot drum conversion kit. Ride-on 66 in. roller provides dual amplitude, with choice of high or low compaction forces up to 22,500 lb, to optimize maneuverability and compaction on any soil. Features include removable ROPS/FOPS, cooling system, and 45 gal hydraulic and fuel tanks.

Hitachi America Ltd.
Brisbane, CA 94005
May 01, 2006 Powered by Yanmar 3TNV88 engine, Zaxis 27u-2 compact excavator has operating weight of 6,393 lb, 15 ft 4 in. dig reach, 8 ft 7 in. dig depth, and max auxiliary flow of 13.9 gpm. When used with long arm/counterweight option, max dig reach is 16 ft 2 in. and max dig depth is 9 ft 7 in. Operator station tilts forward 50° for access to control valve and front side engine components. Undercarriage sheds dirt easily, and rubber tracks have crack-resistant core.

Blastrac
Oklahoma City, OK 73114
Apr 25, 2006 Available in gas or electric models, 10 in. BMP-250-X series controls dust while scarifying, planing, cleaning, and resurfacing concrete, asphalt, and steel when used with appropriate dust collection system. Products repair common slab problems and remove coatings, paint, traffic lines, mastics, adhesives, and rubberized coatings. Along with side-loading drum, features include twin-system depth control, sealed bearings, and toothed pulley/belt drive system.

Stone Construction Equipment, Inc.
Honeoye, NY 14471
Apr 14, 2006 WolfPac(TM) 6100 employs electro-hydraulic circuit that enables operator to direct vibration to front drum, rear drum, or both drums. Suited for asphalt compaction of base, binder, and finish coats, 47 in. wide roller is powered by 33.5 hp, water-cooled Kubota diesel engine and provides 6,518 lb of impact. In addition to double drum drive and centerpoint articulation, features include adjustable sprinklers and pressurized water system with gravity-feed back-up.

Worksaver Inc.
Litchfield, IL 62056
Apr 14, 2006 Designed to handle large rectangular bales, tractor front loader Model RBSF-449 features 72 in. wide frame with 4 tapered spears that are spaced 22 in. apart with 44 in. of usable length. For handling 2 bales simultaneously, optional bolt-on uprights are available.

Control Chief Corp.
Bradford, PA 16701 0141
Apr 03, 2006 COMMAND CHIEF® remote control systems, based on Communicator® RF control module incorporated into Allen Bradley SLC-500 PLC platform with dedicated Watchdog module, enable frequency and crane address to be programmed for each crane from within application program. Product communicates directly through backplane of PLC, providing real-time wireless control. Unit supports remote logging, programming, and interrogation of PLC ladder logic via PC or network.