Anver Corp. - Anver.Com
Hudson, MA 01749 3214
Apr 02, 2003 Self-contained Vacuum Fork Lift Attachment is fully adjustable with pivoting vacuum pads. It handles large sheet, plate, and panels from top using vacuum to prevent damage from forks or grabs. With independent controls that can be located within reach of fork lift operator, battery-powered unit requires no wiring integration and safely handles loads weighing up to 2,000 lb. It is suitable for electric, gasoline, or propane powered forklifts.

Caterpillar, Inc.
Peoria, IL 61629
Apr 01, 2003 Model 304 CR (Compact Radius) mini hydraulic excavator weighs 9,896 lb with cab and delivers 36 net hp. Product accommodates two stick sizes for maximum digging depth of 12 ft 4 in. Offerings include naturally aspirated, water-cooled, 4-stroke, 4-cylinder diesel engine; travel speeds to 2.9 mph; travel system with straight-line travel function; and built-in balance valves. Variable-flow hydraulics provide balanced power and speed with bucket digging forces of 8,228 lbf.

Sure-Foot Industries
Cleveland, OH 44130
Mar 31, 2003 Bold Step non-porous, permanent footway solutions are engineered with aluminum platform and utilize epoxy-based filler that accommodates standard and custom colors that defy effects of heavy foot traffic and severe weather. Stair treads, stair nosings, and safety walkway treads can be used outdoors and indoors, anchored into cement or wood. Systems, available in lengths to 10 ft and widths of ¾–11 in., resist damage from repeated exposure to chemicals/solvents.

Caterpillar, Inc.
Peoria, IL 61629
Mar 28, 2003 Series 500E Vibratory Soil Compactors are powered by 6-cylinder Caterpillar 3056E ATAAC, turbocharged and after-cooled electronic diesel engine with gross power rating of 150 hp @ 2200 rpm. Electronic Control Module provides electronic timing and fuel delivery. Dual-pump propel system provides separate hydraulic flow to rear wheels and drum for high tractive effort. Compactors are suitable for applications with common fill lift thickness from 12–188 in.

Kastalon, Inc.
Alsip, IL 60803 1810
Mar 12, 2003 Fork-Kushions™ equip lift trucks with Kastalon solid and Kast-A-Lite® polyurethane bumpers mounted to upright of fork, providing protection from marring, denting, and other forms of damage. Providing vibration-deadening properties without compromising load capacity, products adapt to all sizes of lift truck forks. Mounted directly to face of fork via permanent mounting bracket, bumpers do not move or shift and withstand constant use and force.

ICON Industries, Inc.
Beloit, KS 67420
Mar 12, 2003 Suited for use with skid steer loaders, rolling packer attachment allows contractors to pack or roll material in hard-to-reach areas by utilizing power and weight of skid loader. Unit is offered with 72 in. packing width and choice of high speed packing teeth or flat roller. Forward and reverse cleaners are standard. Quick mount or dismount replaces skid steer loader bucket, attaching to standard brackets. Packer teeth do not chip material.

Compaction America, Inc.
Kewanee, IL 61443 1714
Feb 25, 2003 Independently driven BMP851 incorporates polygonal design, which eliminates need for scraper bars and reduces demand for engine horsepower, allowing extra power to be directed to travel and vibration circuits. Polygonal drums combine flat-surface plate compactor characteristics with drum-style compactor capabilities. Effective on granular and cohesive soil types, polygonal drums fit same bolt pattern as standard BMP851 drums and provide an overall working width of 33.5 in.

Caterpillar, Inc.
Peoria, IL 61629
Feb 18, 2003 Models D5N and D6N are powered by 3126B Hydraulic Electronic Unit Injection engines, which deliver 115 and 145 net hp respectively. Drive train components are electronically integrated. Equipped with Finger Tip Control (FTC) Steering, D5N models can be operated with one hand, while D6N models are offered with FTC and Differential Steering. Cab includes sound levels of 76 dB, ergonomically shaped and placed controls, and Electronic Monitoring System.

Compaction America, Inc.
Kewanee, IL 61443 1714
Feb 03, 2003 Series BW124-3 consists of 7,275 lb smooth drum Model BW124DH-3 and 7,384 lb padfoot drum Model BW124PDH-3. They feature dual travel pumps, no-spin differential, and 50 hp, Deutz air/oil-cooled diesel engine. Rollers offer dual amplitudes and operating frequency of 2,460 vpm to achieve 19,125 lb of centrifugal force. Oscillating/articulating center joint delivers ±12° oscillation. Maximum working speed is 5.6 mph for both models.

Midland Machinery Co., Inc.
Tonawanda, NY 14151
Jan 30, 2003 Multi-Sweep attachments, available in sweeping widths of 46, 59, 80, and 98 in., feature debris-collecting hoppers of 9.5, 14.0, 25.5, and 31.8 cu ft, respectively. They attach to wide range of prime movers with forks. Mix of 50% wire/50% poly rotating sweeper brushes pick up anything from fine granular materials to construction debris and mud. Direct-drive sweeper motor is powered by PTO through hydraulic wet lines of prime mover. Engine-powered models are also available.

VAC-TRON Equipment, A Div. Of American Mfg. & Machine, Inc.
Okahumpka, FL 34762
Jan 21, 2003 E-VAC® vacuum excavator is offered in 60 different models. User simply removes 4 bolts and transforms trailered unit to skid that can be carried by virtually any truck or moved around by forklift.

Paul Wever Construction Equipment Co., Inc.
Goodfield, IL 61742-0085
Jan 02, 2003 Construction-Carry-All (CCA) allows operator to hook up various attachments and switch drive units with little effort. Any category of 3-point hitch attachments or skid steer quick coupler attachments can be used. CCA can be converted to variety of drive units using Quick-Tach System. It can be mounted on tractors, skid steers, ½ ton pickups to heavy duty trucks, and custom carriers. CCA aids in snow removal, moving, grading and ditching, and landscaping.

Vestil Manufacturing Co.
Angola, IN 46703-0507
Jan 02, 2003 Engineered for use with existing fork trucks, units transport snow, gravel, sand, or refuse. Fabricated of steel with leak-proof welds, 1 1/3 cu yd loaders have capacities of 4,000 lbs. Beveled front edge and 90° dump angle permit complete dumping of materials being moved. Fork pockets measure 7½ in. wide x 2½ in. high on 24 in. centers. Overall size is 69 3/4 x 62 5/8 x 22 9/16 in. high.

V & B Mfg. Co.
Walnut Ridge, AR 72476 0268
Dec 27, 2002 Groundbreakers® XT series offers 60+ heavy-duty tools including rugged-duty sledges, splitting mauls, wedges, tampers, and wrecking bars. Line also includes 15 different models of picks and mattocks and 14 sizes of long handled sledges ranging from 2–20 lb. Offered with choice of fiberglass or hickory handles, Strikers XT Series of 18 tools includes short handled hand drills, cross peins, and sledges.

Cattron-Theimeg, Inc.
Sharpsville, PA 16150 1198
Dec 17, 2002 Pendant Station controllers combine ergonomic design with remote control technology for no-cord operation. With metal housing, handheld units are suited for heavy-duty industrial environments. Controllers are available for use with company's portable, radio-remote control systems to provide message security, quick response time, and safe, accurate control of overhead cranes and industrial equipment.

Conductix-Wampfler
Omaha, NE 68127
Dec 17, 2002 Radio Controls include 4, 6, and 8 button Protean control and dual joystick J Series radio for 5 speed, 8 motion applications. They include watchdog error circuitry, output relay monitoring, frequency deviation deflection indicator, and programmable password protection. All circuitry is shock-proof and mounted within rigid glass filled nylon enclosure. Receiver and transmitter are NEMA 4 rated. Tandem mode operation allows simultaneous crane operations.

Komatsu America International Company
Vernon Hills, IL 60061
Dec 12, 2002 Model PC1250-7 is a 251,000 lb hydraulic excavator with 651 hp engine featuring electronic controller and governor that complies with EPA Tier II air quality regulations. Open-center, load-sensing, and engine speed-sensing hydraulic system includes 4 variable capacity pumps. Equipment Management Monitoring System schedules maintenance and performs onboard diagnostics. Pressurized cab reduces noise levels and keeps dust out. Standard track frame is 21 ft 1 in. and GP boom is 29 ft 10 in.

Hardnox LLC
Santa Barbara, CA 93105
Dec 11, 2002 Door Jak™ 50 allows one worker to transport and install heavy doors of all types. It weighs 60 lb and folds for easy transport. Unit is rated to handle steel, fire-rated, solid-core, and commercial-grade doors up to 250 lb. Door Jak 100 commercial door cart offers over capacity 750 lb and is used in hospitals, universities, airports, hotels, and large facilities.

JLG Industries, Inc.
McConnellsburg, PA 17233 9533
Dec 05, 2002 SkySaw™ integrates concrete wall saw system into aerial work platform and includes SkyCleaner™ pressure-washing system. Onboard hydraulic manipulator holds concrete saw and guides it along bolt-on track for precision cuts. Able to be operated by one worker, hydraulic pump powers saw, drill, and manipulator. Hydraulic hoses and water lines are located inside boom's power track. Adjustable system is capable of spraying at 1,000–3,500 psi. It includes two 150 gal water tanks.

Vestil Manufacturing Co.
Angola, IN 46703-0507
Dec 04, 2002 Fork Extensions speed up process of loading pallet on back of fork truck. Spacer length is slightly more than jam of truck door, eliminating need to back out of pallet, pick up pallet again and push to clear door. Extensions are offered with various retainers to keep from sliding off of forks. Lengths range from 48–96 in. Extensions accommodate existing fork widths of 4, 5, and 6 in. that are up to 2 in. thick.