Aldon Co., Inc.
Waukegan, IL 60087 3218
Sep 02, 2004 Non-Slide Crane Stop is used where conventional crane stop attaching plates interfere with rail hook bolts. Dogs clamp upright wedge to rail and barely drop beneath head of rail for maximum clearance. Upright wedge is available in either straight-edged style for bumper contact, or in curved form to accept particular crane wheel diameter. Crane Stop is suited for cranes traveling at normal operating speed and should not be used at end of crane runs.

Queue Research Ltd
Dunedin sw1  New Zealand
Sep 01, 2004 EARTH SET modules retain soil alongside motorways and rail cuttings, controlling water runoff and preventing riffling and erosion. They function by clipping ~1.3 m² sections together, which overlap similarly to roofing tiles. Front face is perforated with multiple rows of holes to allow controlled flow of water passing down array of modules. Individual modules are each held in place by two 600 mm D10 steel stakes.

Komatsu America International Company
Vernon Hills, IL 60061
Aug 09, 2004 Mid-Size Models D61 EX-15 and D61 PX-15 are standard- and low ground-pressure dozers, respectively, outfitted with Tier II compliant SA6D1 14E-2 engine. They push with 155 hp at 1,850 rpm and range in operating weight from 35,080–41,010 lb. Hydrostatic Steering System eliminates steering clutch and offers agile movement when dozing. Power angle tilt blade offers capacity of 4.4 yd³ for D61 EX-15 and 5.0 yd³ for D61 PX-15. Multi-shank rippers can rip over 2 ft below surface.

Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
Aug 05, 2004 Featuring all-steel construction, DU-SOM drum upending attachment allows operator to pick drums from horizontal or vertical positions in rack or other storage applications, remove them, and turn them around safely for transport or use. Mechanical attachment fits any forklift and handles up to 850 lb in 55 gal fiber, steel, or plastic drums. Options are available for handling drums with inserted faucets or spigots.

Bostik Findley, Inc.
Middleton, MA 01949-2128
Jun 09, 2004 Bostik® GPS1 construction-grade sealant, suited for general-purpose sealing of dissimilar substrates, may be used in interior or exterior construction applications. Due to solids content, elastomeric urethane sealant produces seals that will not shrink or become brittle with prolonged exposure to weather extremes or UV rays. Physical properties include 135 psi tensile strength, 550% elongation rating, and 35-40 Shore A hardness value.

Coleman Equipment, Inc.
Irvington, NJ 07111
Jun 02, 2004 VacUp Lifting Device utilizes flow from vacuum blower to grip and lift load. Lifting ability is produced by capturing vacuum inside lift hose. Varying vacuum level with raise/lower handle enables load to be moved through 6 ft of lift.

LPI Lift Systems
Eau Claire, WI 54703
May 25, 2004 Work Platform measures 20 in. wide, and scissors-type lift can be raised vertically from 10–46 in., providing working height of approximately 10 ft. Optional guardrails allow unit to be used as worktable for variety of tasks. Tabletop surface measures 20 x 66 in. and can hold up to 1,000 lb. Lightweight design of both worktable and platform enable maneuvering in tight places. Units operate off compressed air source, requiring 8 scfm at 100 psi.

TrynEx International / SweepEx Division
Warren, MI 48089
May 14, 2004 SweepEx ValuSweep brooms are available in 2 models: 40 lb VSB-48 with 48 in. cleaning width, and 50 lb VSB-60 with 60 in. cleaning width. Both include 5 rows of replaceable polypropylene brush sections and are constructed of heavy-duty, one-piece solid aircraft aluminum. Bristles move anything from standing water to light snow to small and large debris. Intended for use with forklifts, brooms come with 5 in. wide Quick-Tite™ fork pockets.

Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
May 11, 2004 Model 2-DCM fits any forklift truck without needing electrical or hydraulic connections. Parrot-Beak® mechanical drum clamping gripper lifts steel, fiber, and plastic drums weighing up to 2,000 lb each. Rubber belt cradle on lower end of unit cushions side of drum during pick-up and transport, protecting labels, printing, and bar codes. Safety chain retention system keeps unit on forks of truck. Model 2-DCM can be ordered to handle 1–4 drums in straight row.

Midwest Tool & Cutlery Co.
Sturgis, MI 49091
Apr 28, 2004 Made of hot drop-forged moly alloy steel, Seamer Tongs feature cushioned grips that allow users to bend and form metals as well as grip and hold metal sections or panels being joined. Models, with one-piece, straight or curved handles, have 3 in. wide blades and throat capacity of 1 1/8 in. Dual blades have raised ribs in ¼ in. increments on outer surfaces for positioning of tongs, and overall tool length is 9½ in.

Garon Products, Inc.
Wall, NJ 07719 1924
Apr 22, 2004 Joint Guard™ fills expansion joints with flexible epoxy seal that will not become brittle or break out as sections of floor expand and contract in response to temperature changes. With 100% solids formula, product flexes up to 50% and withstands heavy traffic and chemical contact. Pourable, self-leveling, self-priming, non-shrink sealant prevents contaminants from pooling in joint areas.

Loegering Manufacturing Inc.
Casselton, ND 58012
Mar 24, 2004 Forward-digging, skid-steer-mounted trencher can dig in both directions, straight, and in curves. Skid-plate sets in relation to 2 tandem dirt augers and rests on ground, allowing operator to skid-steer in float position and maintain constant digging depth. It is available in digging depths of 3 ft 6 in., 4 ft 6 in., and 5 ft 6 in. and can dig trenches 5–12 in. wide. Trencher can convert to a different size by adding boom extension piece and additional section of chain.

Caterpillar, Inc.
Peoria, IL 61629
Mar 23, 2004 Models CB-214E, CB-224E, and CB-225E are powered by 3-cylinder 3013C diesel engines that provide 32.7 hp and operate at 2,800 rpm. Double-drum Model CB-214E offers 39 in. compaction width and is suited for maintaining streets, roads, and alleys. Featuring compaction width of 47 in., double-drum Model CB-224E handles tons-per-day production rate. Model CB-225E has 47 in. wide drum at front and 4 smooth tires in rear, providing benefits of vibratory and pneumatic compactor.

Loegering Manufacturing Inc.
Casselton, ND 58012
Mar 23, 2004 Demo-Dozer combines capabilities of different buckets into one attachment. Unit is available in overall widths of 61, 67, 73, 79, and 85 in. with open height of 33.4 in. and overall length of 34.9 in. It includes recessed grease zerks, cylinder and hose covers, predrilled base edge, quick couplers, connection hoses, removable side plates, and 2 outside access steps. It is suited for concrete and asphalt removal, demolition, and sod and vegetation removal.

Caterpillar, Inc.
Peoria, IL 61629
Feb 18, 2004 With operating weights from 11.8–14.0 ton, CS-533E and CP-533E feature dual-pump arrangement that provides required pressure and flow to drum-drive motor and wheel-drive motor independently, resulting in max torque and full time tractive power to drive motors. Rear axle incorporates limited-slip differential that provides continuous power in soft or slippery conditions. Smooth-drum CS-533E compacts granular and semi-cohesive soils, while padfoot-drum CP-533E compacts cohesive soils.

Paul Wever Construction Equipment Co., Inc.
Goodfield, IL 61742-0085
Feb 09, 2004 Snowbox, V-plow, Wing Plow, and Angle Plow can be easily interchanged. Three-point hitches allow for hook up to almost any vehicle or tractor. Depending on requirement, end user can use attachments independently or in combination with each other. No major modifications are needed to attach CCA Wing or Snowbox. As snow gets deeper, design allows operator to change plow from pickup to backhoe in 5 minutes.

Orion Fittings, Inc.
Kansas City, KS 66117
Feb 04, 2004 Electrofusion joining system joins polyvinylidene fluoride acid waste pipe and fittings from 1½–6 in. using Rionfuse electrofusion processor built into shock-resistant, splash-proof case. System utilizes fusion coil made from heavy-duty stainless steel coil wire which can be rotated 360° in socket to aid in installation. Able to be interfaced with PC, product ensures leak-free joints and has internal memory that keeps track of date and weld number.

MagneTek, Inc.
Nashville, TN 37214 4602
Feb 03, 2004 Hoist drives employ software that allows up to 7 slave VFD motors to be synchronized to master encoder signal using Electromotive Systems IMPULSE® Series 2 VFD. Master IMPULSE® drive provides pulse reference to slave encoder that commands motor's speed. Slave IMPULSE® drives monitor pulse feedback from master and slave encoders and compensate for position errors, resulting in correct alignment between the system master motor and the slave motor.

Garon Products, Inc.
Wall, NJ 07719 1924
Jan 26, 2004 Hy-Speed 500™ emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

Vestil Manufacturing Co.
Angola, IN 46703-0507
Jan 22, 2004 Dual Door Work Platform provides access from both sides with inside-swinging, self-closure gates. Door openings are 16½ in. Unit attaches to fork truck by inserting forks into rear fork tubes of platform, and is secured to mast with 36 in. chain and tine lock. Made of welded steel with blue powder coat finish, platform includes 2 fall prevention harness anchor points and posted tri-lingual instruction sign. No assembly is required.