Construction Equipment & Supplies

Construction Equipment & Supplies

PTO Trucks suit vacuum excavation applications.

February 9, 2016

Available on Ford or Freightliner chassis, HTV PTO Hydro Truck Vac Series features debris tanks ranging from 300–1,500 gallons. Power Take Off drives positive displacement vacuum blowers that produce 1,000–2,600 cfm. Units are standard with high pressure water system, full hydraulic rear claw door, reverse pressure, and Big Red filter housing that cleans air down to 0.5 microns before it passes back through vacuum pump. Air compressors and hydraulic booms are also available on most units. Read More

Construction Equipment & Supplies

Wheel Compactor suits cohesive and clay soil environments.

February 8, 2016

Engineered to safely compact fill material in trench as it is being back-filled, boom-mounted IHW Series features patent-pending locking wheel removal design that facilitates field accessibility to heavy-duty, sealed bearings by eliminating weld-type bearing encasements. Heavy-duty steel weldments with relief ports prevent material jam, while specially designed pads effectively penetrate trench fill and achieve bottom-up rather than top-down compaction. Read More

Construction Equipment & Supplies, Architectural and Civil Engineering Products, Green & Clean

Twisted Steel Micro Rebar targets tunneling market.

February 5, 2016

Unlike rebar and other forms of reinforcement, Helix 8-50 Twisted Steel Micro Rebar allows for efficient tensile stress re-distribution within concrete prior to concrete cracking. Product has nominal length of 2 in. and equivalent diameter of 0.30 in., which meets ASTM A820 - Type I specification. Technology uses continuous deformation along length of shaft in form of twisted ribs, providing continuous anchorage in concrete as opposed to smooth steel fibers that rely on small end hooks. Read More

Construction Equipment & Supplies

Earthmoving Scraper targets mass market.

January 14, 2016

Able to mount onto Articulated Dump Truck chassis, in addition to agriculture or construction tractors, 28 yd³ Model 1228ADT can be used to self-load, transport, and eject material with single engine running. Operator is able to use responsive joystick control functionality inside Articulated Dump Truck, and digital display screen is included in cab for visual operating details. With ability to travel 30+ mph down haul roads, Model 1228ADT optimizes cycle time performance. Read More

Construction Equipment & Supplies, Mechanical Components & Assemblies

Power Tilting Coupler enables 180° of attachment movement.

January 14, 2016

Approved for variety of Doosan excavators, Power Tilting Coupler provides excavator flexibility and precision when digging trenches, performing general excavation tasks, and final grading. With coupler, operators can angle trenching or ditching bucket 67° left and right for up to 134° of flexibility. Coupler can work under or around objects, such as underground pipe, to complete excavating. Additionally, coupler can eliminate need for multiple attachments on jobsite. Read More

Material Handling & Storage, Agricultural and Farming Products, Construction Equipment & Supplies

Mini Grapple is available for sub-compact tractors.

January 12, 2016

Used for handling debris, brush, or orchard prunings, CTMG-48S is designed for sub-compact tractors that use universal skid steer quick attach system. Gripping notches in both upper grapple and lower rake help retain loose materials. While 31 in. wide single upper grapple is made of 3/8 in. material, lower 48 in. wide rake has tines made from ½ in. material. Read More

Material Handling & Storage, Construction Equipment & Supplies

Severe-Duty Crawler Excavator Buckets handle abrasive materials.

January 11, 2016

Approved for use with DX140LC-5 through DX530LC-5 crawler excavators used in heavy digging and loading applications, severe-duty buckets come in pin-on or wedge-lock style and handle abrasive materials. Side cutters, shell bottom and side wear plates, and weld-on wear shroud are made of abrasive-resistant material, and reinforcing gussets strengthen machine-fitting joint on bucket. Offered in 18–72 in. widths, buckets also feature front wear pads, thick cutting edge, and rolled wear strap. Read More

Material Handling & Storage, Construction Equipment & Supplies

Adapter mounts skid steer type attachments to 3-pt tractor hitch.

December 18, 2015

Shipped with Cat I pull pins (7/8 in.), 3-pt hitch to skid steer adapter allows operator to mount skid steer type attachments to tractor's 3-pt hitch. Solution fits category I or II hitches, is quick hitch compatible, and features all-steel construction with plated handles, pins, and springs. When paired with Worksaver Category I hydraulic top link cylinder, unit helps operator find optimal working angle when using skid steer type attachments. Read More

Construction Equipment & Supplies, Architectural and Civil Engineering Products, Plant Furnishings & Accessories, Green & Clean

Wall Construction System optimizes structural integrity.

December 8, 2015

With specifications that meet requirements for energy-efficient design and construction in National Building Code of Canada, HP+™ Wall System XR Series provides optimized structural integrity and thermal efficiency with minimal air leakage. Walls are no thicker than conventional walls and can be seamlessly integrated into conventional construction projects. System has been designed to meet or exceed requirements for nominal R-value up to 45.8. Read More

Construction Equipment & Supplies

Heavy-Duty Land Leveler supports legal road transport.

December 8, 2015

Ranging from 10–28 ft wide, K-Tec land leveler is designed for maintaining haul roads, precision site leveling, and field drainage. Standard features include walking axle; single, simplistic tilt; depth level gauge; and LED light package. Also compatible with dual GPS/laser for precision grading work, lever features moldboard curve design that optimizes rolling of dirt. Models come in Rigid frame or Flex hitch designs. Latter enables folding back of hitchpole for legal road transportation. Read More

Cleaning Products & Equipment, Construction Equipment & Supplies, Mechanical Components & Assemblies

Compact Excavators offer flail mower attachment.

November 6, 2015

Available for Bobcat E63, E80, and E85 excavators, Bobcat® 40 in. FMR Flail Mower Attachment provides optimal safety and performance in mowing and land-clearing applications. Attachment features triple-knife design, direct-drive motor for aggressive cutting, and compact deck for varying ground contours and hard-to-reach places. Side safety chain within housing unit helps deflect and contain debris, while rubber torsion disc absorbs stress forces encountered during operation. Read More

Construction Equipment & Supplies

Compact Excavator features zero tail swing.

November 3, 2015

Equipped with 47.6 hp Yanmar Tier IV-certified, turbocharged diesel engine with electronic throttle control, 5.5 metric ton Mustang 550Z includes ECO mode and auto deceleration features to save fuel. Boom offset swing of 68° in both directions allows for digging square hole without repositioning machine. To minimize backfilling time, excavator has angle blade with float that tilts 25° in either direction. Operator can select standard ISO or optional backhoe control pattern with turn of lever. Read More

Construction Equipment & Supplies

Low-Vibration Back Fill Tamper reduces operator fatigue.

November 2, 2015

Trelawny™ VL LRS Back Fill Tamper allows safe compaction close to walls and around such objects as fragile pipes, utility poles, and water meters. Suitable for narrow trench work, pathways, and small area reinstatement tasks in and around restricted excavations, Model 150.5330 features Vibro-Lo™ vibration reduction technology and 4 x 4 in. foot tamper. This transportable and storable unit, at 50 in. long and 48 lb, uses 1,300 bpm to compact material up to 136 lb/ft³. Read More

Construction Equipment & Supplies

Zero-Tail-Swing Compact Excavator offers 9,419 lb bucket breakout.

October 30, 2015

While powered by 47.6 hp, Tier IV-certified, turbocharged diesel engine with electronic throttle, 5.5 metric ton Z55 provides ECO mode and auto deceleration features that help conserve fuel. Proportional auxiliary hydraulic rocker switch lets operator adjust hydraulic flow for optimal attachment performance, and operator can select standard ISO or optional backhoe control pattern. Along with bidirectional 68° boom offset swing, features include angle blade with float and bolt-on cutting edge. Read More

Construction Equipment & Supplies, Mechanical Components & Assemblies

Spreader Attachment enhances Bobcat utility vehicle versatility.

October 22, 2015

Powered by 12 Vdc drive motor, spreader attachment mounts in utility vehicle cargo box of 2015 model year Bobcat® 3400/3600/3650 utility vehicles to spread sand and salt for winter maintenance. Two variable-speed dials on dash-mounted control allow independent adjustment of auger and spinner, and 3-stage baffle lets operators adjust material flow. Salt/sand distribution range is 5–38 ft from spinner wheel. Double-wall, poly-molded hopper holds 10.6 ft³ (heaped) or 7.8 ft³ (struck) salt or sand. Read More

Construction Equipment & Supplies

Crawler Dozer provides high-speed grading.

October 16, 2015

Equipped with 6.8 L, 168 hp, SAA4D107E-3, EPA Tier 4 Final emissions certified engine, Model D61-24 offers choice between quick-shift, 3-speed mode and variable, 20-speed customizable transmission mode. Komatsu Variable Geometry Turbocharger optimizes engine response and helps maintain high level of passive regeneration to ensure fuel isn’t wasted on cleaning exhaust filter. In addition, KOMTRAX telematics system provides KDPF status, DEF consumption, fuel level, hours, and maintenance alerts. Read More

Construction Equipment & Supplies

Snow Pusher Attachment reduces overhead hand shoveling.

October 14, 2015

Conserving time by reducing hand shoveling when clearing snow from overhead doors or buildings, pull-back kits are available for 24-Series Snow Pushers. Pull-back lets operators rotate snow pusher forward in order to engage rubber edge with ground and pull snow away. Bolt-on installation using existing holes on end plates negates need for any additional drilling. Read More

Chemical Processing & Waste Management, Construction Equipment & Supplies

Chippers/Shredders offer discharge, self-feeding options.

October 13, 2015

In addition to respectively reducing up to 3, 4, and 5 in. dia branches into woodchip mulch, Chipper with Shredder models 9.5 , 11.5, and 21.0 separately shred up to .5, .75, and 1.5 in. dia yard/garden waste. Entry model (9.5) includes 2.5 bushel debris bag, and 21.0 model has self-feeding technology. Respectively, 11.5, 16.5, and 21.0 Self-Feeding Chippers consume up to 3.75, 4.75, and 5.75 in. dia branches. With PTO shaft, 3-Point Hitch self-feeding chipper has 4.75 in. dia branch capacity. Read More

Materials & Material Processing, Agricultural and Farming Products, Construction Equipment & Supplies, Material Handling & Storage, Mounting & Attaching Products

Weld-On Plate enhances John Deere 500 Series loader functionality.

October 9, 2015

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure proper fit when welded to buckets or attachments.

Read More

Materials & Material Processing, Construction Equipment & Supplies, Mounting & Attaching Products

Weld-On Plate supports John Deere 300/400 loaders.

September 29, 2015

Measuring 49.38 x 19.40 in., John Deere 300/400 Series Weld-on Plate is formed from 5/16 in. steel and is designed to be welded to existing attachments, allowing them to be used with John Deere 300/400 Series loaders that use JD attaching system. Plate features steel cast upper hooks and welded locking pins spaced to OEM specifications, ensuring proper fit when welded to buckets or attachments. Read More