SIXNET
Clifton Park, NY 12065 0767
Jan 03, 2007 Mini-VersaTRAK mIPm PLUS RTU provides Ethernet, up to 4 serial ports, and mix of 26 discrete and analog I/O. In addition to pre-loaded software for AGA gas flow calculations and DNP-3 time stamped communications, unit comes with open-source Linux and IPm firmware for automation, control, and DAQ. RTU incorporates 32-bit industrial PowerPC as well as 64 Mb flash disk and 32 Mb fast dynamic memory. It also offers hot swap capability and is rated for hazardous locations.

Joslyn Hi-Voltage Corp.
Cleveland, OH 44105 4398
Nov 17, 2006 SmartLink(TM) 5000 Series provides 2-way communications with Fisher Pierce overhead radio faulted circuit indicators (FCIs). Integrated cellular Remote Terminal Unit (RTU) can report fault alarms from up to 4 FCIs (A, B, C phase, and tap) using local RF signal. Status, alarms, and other event notifications can be integrated into SCADA systems as well as sent to customer-designated personnel via email, pager, or text message. Precise fault information reduces outage duration.

Rockwell Automation
Milwaukee, WI 53204
Sep 11, 2006 GuardPLC handheld terminal helps maintenance workers program and configure safety controllers and I/O modules without bringing PC to plant floor. Compatible with all Allen-Bradley GuardPLCs and distributed I/O blocks, it connects to device on Ethernet network, and stores programs in on-board flash memory or removable multimedia memory cards. Device can change various controller parameters and reboot in event of safety stop condition.

Emerson Process Management
Austin, TX 78754
Jul 21, 2006 ControlWave Express RTU features operation in -40 to +70°C temp range and low power consumption for solar applications. Unit meets CE and UL Class I, Div. 2 hazardous location requirements. With 3 serial communication ports and 1 optional 10/100 Mb Ethernet I/P port, and RTU facilitates device communication through BSAP, TCP/IP open Modbus, serial Modbus, DF1, DNP3 and HART networks.

MTS Sensors Group
Cary, NC 27513
Jul 19, 2006 Red Lion Tank Level and Multi-Tank Level Monitoring HMI Modbus RTUs provide storage temperature, volume, interface, and level information. Displays, positioned at bottom of tanks, deliver feedback information from gauges within storage tank and can be customized for 4, 8, or 16 tank systems. Modbus RS-485 RTU Slave Interface enables communication between display and external PLC or DCS system, while Ethernet port enables data to be logged in external control system.

Emerson Process Management
Austin, TX 78754
May 24, 2006 Intended for remote applications in energy, water, and wastewater industries, ControlWave ExpressPAC combines ControlWave Express RTU, NEMA 4X rated enclosure, power supply, and solar panel options with battery backup, and operator display/keypad input options. It has 3 serial communication ports and 1 optional 10/100 Mb Ethernet I/P port. ExpressPAC facilitates communication with other devices through networks such as TCP/IP open Modbus, serial Modbus, DF1, DNP3, and HART.

Dietze Enterprises, Inc.
Chicago, IL 60654
May 10, 2006 Model NOMAD-RF(TM) lightweight, hand-held personal data terminal allows tradeshow exhibitors to collect information at shows where RFID technology is being used. Measuring 7.8 x 3.1 x 2 in. and weighing 11 oz, battery-powered terminal sends signal to RFID-encoded badge, and then collects, stores, and displays attendee's contact data in less than 1 sec. No line of sight is needed to collect data from badge, and it remains powered through length of tradeshow without recharging.

Emerson Process Management - Daniel Measurement and Control, Inc.
Houston, TX 77055
Apr 28, 2006 ControlWave ExpressPAC pre-engineered automation system includes Express RTU, compact Nema 4X rated enclosure, power supply, and solar panel options with battery backup, operator display/keypad input options, and wireless communication options. Suited for use in energy, water, and wastewater industries, ControlWave offers operating temperature range of -40 to +70°C for remote sites, and low power consumption for solar applications.

ASI Datamyte
Plymouth, MN 55441
Mar 23, 2006 Suited for industrial data collection, statistical process control, and torque audit applications, Model 501 supports entering of characteristic names with up to 50 characters and permits validation checking for Vehicle Identification Numbers (VIN). It only accepts VINs with correct number of characters, valid characters, and valid check digit. Unit captures up to 7 discrete peak torque measurements in 1 sec., enough to complete one 360° test rotation.

Intelligent Instrumentation
Tucson, AZ 85706
Mar 23, 2006 Featuring NEMA 12, solid-state construction, LANpoint TIME terminals provide real-time data collection for tracking and reporting employee productivity throughout enterprise. They are available with multiple AutoID interfaces, choice of reduced or QWERTY keyboards, and Ethernet 10/100BaseT adapter or optional wireless 802.11b Ethernet connectivity. Along with web-enabled system administration tools, terminals feature 2 line x 40 character backlit LCD display.

Advanced Embedded Systems, Inc.
Marana, AZ 85653
Mar 21, 2006 Suited for monitoring inventory tanks, lift stations, SCADA equipment, and data loggers, RT12_4444_9T_W20 wireless RTU allows monitoring and control of 4 high resolution analog and 4 discrete inputs and outputs. It can serve as standard Modbus Slave RTU in radio based SCADA system and is plug-and-play compatible with SCADA/DCS Modbus software packages and process controllers. Optional configuration features such as polling rates, SLAVE id number, I/O addressing, and alarms are changeable.

Advanced Embedded Systems, Inc.
Marana, AZ 85653
Mar 09, 2006 Suited for monitoring inventory tanks, lift stations, SCADA equipment, and data loggers, RT12_2222_ZP_S12 wireless RTU allows monitoring and control of 2 analog and 2 discrete inputs and outputs. It can serve as standard Modbus Slave RTU in radio based SCADA system and is plug-and-play compatible with SCADA/DCS Modbus software packages and process controllers. Optional configuration features such as polling rates, SLAVE id number, I/O addressing, and alarms are changeable.

Nordic ID
SALO 24100  Finland
Mar 01, 2006 Suited for use on European frequency bands, handheld Model PL3000 combines mobile data collection, processing, and storage capacity with variety of wireless communication technologies including WLAN and Bluetooth for local environments and GPRS or GSM for remote applications. In addition to UHF RFID reader, PL3000 can be equipped with barcode and 2D code readers. Weighing 500 g, unit supports ISO18000-6 B, UCODE, and EPC 1.19 standards.

Intelligent Instrumentation, Inc.
Tucson, AZ 85706
Jan 25, 2006 Full-screen LANpoint XL terminals, designed for manufacturing and warehousing AutoID data collection applications, feature 10.4 or 12.1 in. color touch-screen display and are powered by P-III Class 400 MHz or optional 733 MHz processor running Microsoft Windows CE.NET. Along with aluminum, NEMA 4/IP65-rated case, terminals feature 25-function keyboard, shock and vibration certification to Class 7M3, and support for Cisco's 350 Series RF Wireless IEEE 802.11b cards.

Accu-Time Systems, Inc.
Ellington, CT 06029
Jan 20, 2006 Providing total hardware solution for workforce management, Optimus(TM) (On-line, Personnel Time and Information Management Utility Station) delivers multiple display and reader options including fingerscan biometrics, finger geometry biometrics, barcode, magstripe, proximity, and smartcard. Communication options include encryption-secured Ethernet, WiFi, and modem. Field upgradeable unit has open architecture and is backward-compatible with ATS Cyber Series products.

Intelligent Instrumentation, Inc.
Tucson, AZ 85706
Jan 10, 2006 Designed for AutoID data collection applications, full-screen LANpoint XL terminals feature aluminum NEMA 4/IP65-rated case and are shock and vibration certified to Class 7M3 according to EN 60721-3. Products have 10.4 or 12.1 in. color touch screen displays, available with 300 or 400 nit brightness and 800 x 600 or 1024 x 768 pixel screen resolution. Powered by P-III Class 400 or 733 MHZ processor running MS Windows CE.NET, AutoID computers offer up to 512 MB RAM.

SIXNET
Clifton Park, NY 12065 0767
Jan 05, 2006 Combining Remote Terminal Unit, datalogger, real-time database client, and telemetry interface, RemoteLog is internet/intranet ready and can securely connect through firewalls. Users can also obtain data through internal telephone modem. Unit includes software that will record and upload real-time data to central database. RemoteLog can be used for unattended site monitoring, energy management, or vendor-managed inventory system.

Cannon Technologies, Inc.
Minneapolis, MN 55427
Dec 22, 2005 Capable of bi-directional serial communication with digital polyphase meters from different manufacturers, multi-voltage/multi-protocol Model MCT-470 offers remote reading in 4-6 sec over utility-owned power lines. This enables return of most data registers and sending of certain configuration commands such as demand reset, TOU register switch, and time synchronization. Unit includes pulse and status inputs as well as trip/close control relays.

DLoG Logistics, Inc.
Westminster, MD 21157
Nov 15, 2005 Measuring 22 x 15 x 8 cm, Mobile Industrial Terminal DLoG X 7 features 7 in. TFT display with touch screen, 520 MHz Intel PXA270 processor, and integrated ARM architecture. Rated to IP54/IP65 protection class, terminal operates safely at extreme temperatures. It includes WLAN/GSM connectivity, 2 serial ports, 2 USB ports, and LCD controller with brightness control and vibration/shock resilience. Unit enables both mobile and stationary Windows CE applications.

Paragon Data Systems Inc.
Cleveland, OH 44115
Sep 12, 2005 DRACI Delivery Returns and Collection Information System automatically tracks information on daily delivery and returns collected, enabling users to obtain business information needed to make production and delivery business decisions. Device includes color-coded touch screen for system navigation and on-screen signature capture. Used with Windows® CE.NET/VB.NET technology, users can load entire day's route and print reports and receipts.