Processors & Microcontrollers

Related Categories
Computer Hardware & Peripherals, Mechanical Components & Assemblies

Embedded PC Many-Core Control Hardware provides multi-option interface.

December 3, 2016

Using 14nm process technology CX20x2 Embedded PC Many-Core Control Hardware, holds up to 4 @ 1.3GHz, 8 @ 1.6GHz and 12 @ 1.5GHz CPU cores of Intel Core microarchitecture integrated with Intel® Xeon® D processors. Core options provide high processing power through TwinCAT 3 automation software. Units come with separate CPU RAM and GPU RAM to avoid conflicts with one another, 2 x GBit Ethernet, 4 x USB 3.0, DVI-I with VGA and multi-option interface.

Read More

Computer Hardware & Peripherals

Automotive-Grade PIC32 MCU offers high-speed variant at 250 MHz.

November 18, 2016

Featuring integrated Floating-Point Unit, array of peripherals with high connectivity options including Controller Area Network, Automotive-grade PIC32MZ EF 32-bit microcontroller is ideally used in critical automotive and industrial applications. Industrial temperature of -40° to 85°C is also extended to accommodate applications like high-resolution audio.

Read More

Computer Hardware & Peripherals

Peripheral Touch Controller with Superior Water Tolerance Now Available on Several Microchip MCUs

November 18, 2016

Latest Advancement in Touch Peripheral also First to be Supported by START Code Configurator

CHANDLER, Ariz., Nov. 15, 2016 - Microchip Technology Inc. (NASDAQ: MCHP), a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, has added an enhanced version of the Peripheral Touch Controller (PTC) to their most recently announced microcontrollers, including the...Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Robotics

SC2A11A SOC incorporates 24 cores of power-efficient ARM Cortex-A53.

November 15, 2016

Including Cortex-A53 MPCore 24cores, 1GHz processor, SC2A11A SOC is suitable for data center servers and edge computing in IoT (Internet of Things) systems. Offering DDR4-2133Mbps 64-bit and ECC Memory I/F, device provides optimal CPU balance of performance and power consumption. With UART, I2C, GPIO Serial I/F, unit comes with 2ch 1Gbps LAN wire. Unit offers PCI Express Gen2 and Root/Endpoint select and doesn’t require advanced cooling system.

Read More

Computer Hardware & Peripherals, Controls & Controllers

8-Bit AVR MCU comes with 4 KB to 8 KB flash memory.

November 13, 2016

Featuring Core Independent Peripherals and supported by Atmel START tool, 4 devices of 8-bit AVR MCUs have 14 to 24 pins and 4 KB to 8 KB flash memory. Device includes PTC, programmable logic blocks, non-volatile data storage, 20MHz internal oscillator, high-speed serial communication with USART working with operating voltages from 1.8V to 5.5V, 10-bit ADC with internal voltage and sleep currents at < 100 nA in power down mode with SRAM retention.

Read More

Computer Hardware & Peripherals, Electronic Components & Devices

MSP430 FRAM microcontroller writes without pre-erase or buffering.

November 9, 2016

Available in two modes MSP430FR5994 and MSP430FR2111, MSP430 FRAM Microcontrollers offer 256KB FRAM with MSP430FR5994 and unified FRAM memory in small 3x3 mm QFN package with MSP430FR2111. Integrating 10-bit analog-to-digital converter, EEPROM functionality, comparator, real-time clock, enhanced timers, internal oscillator with 16-bit MCU in MSP430FR2111, unit provides ferroelectric RAM and Supports around 50 math functions with optimized DSP library.

Read More

Computer Hardware & Peripherals

Cavium to Showcase ARMv8 Processor Solutions to Accelerate Next Generation Infrastructure at ARM TechCon 2016

October 31, 2016

Cloud scale deployment on ThunderX® with OpenStack, Secure IoT platform on OCTEON TX™ and MontaVista's CGX 2.0 SAN JOSE, Calif., Oct. 26, 2016 - Cavium, Inc. (NASDAQ: CAVM), a leading provider of semiconductor products that enable intelligent processing for enterprise, data center, cloud, wired and wireless networking, will exhibit ThunderX and OCTEON TX ARM-based solutions for...Read More

Computer Hardware & Peripherals

Cadence RAK for ARM Cortex-M23 and Cortex-M33 processors.

October 28, 2016

Creating low-power ARM Cortex-M23 and Cortex-M33 processors, Cadence’s Rapid Adoption Kit address the development of secure IoT rapidly and efficiently. Consisting of end-to-end digital implementation and signoff flow, RAK enables quick silicon delivery of ARM-based applications. Features optimal power, performance and area, fast runtimes and efficient design closures and implementation of IoT devices. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Analog Devices Collaborates with ARM to Improve Security and Energy Efficiency for IoT Connected Devices

October 27, 2016

NORWOOD, Mass. - Analog Devices, Inc. (ADI) today announced it is collaborating with ARM to provide ultralow power microcontrollers (MCUs) that enable more secure and energy efficient Internet of Things (IoT) based devices. By combining ADI’s innovative ultralow power mixed- signal technology with the new ARM Cortex-M33 processor featuring ARM TrustZone™ technology, ADI is addressing the...Read More

Communication Systems & Equipment, Computer Hardware & Peripherals

Talon RTR 2623 Signal Scanning Recorder offers storage of 30 TB.

October 26, 2016

Allowing immediate access to recordings without need for any file format conversion, device offers intelligent scanning and searching from 20 MHz to 6 GHz at 30 Ghz/sec scan rate. Providing automatic tuning, detection and recording of signals, unit captures instantaneous RF bandwidths up to 40 MHz. Measuring 16.0"Wx6.9"Dx13.0"H and weighing 30 pounds, device is suitable for mobile military and government intelligence applications. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Microcontrollers incorporate Core Independent Peripherals.

October 5, 2016

Helping designers overcome power and size limitations, 4 x 4 mm PIC32MM series offers Core Independent Peripherals and delivers low-power embedded control for IoT, consumer, industrial, and sensorless BLDC applications. Core Independent Peripherals, such as configurable logic cells (CLC) and multiple-output capture compare PWMs (MCCPs), offload tasks from CPU to lower power consumption and design complexity. Further power conservation is made possible via sleep modes. Read More

Computer Hardware & Peripherals, Controls & Controllers

Wireless Microcontroller offers dual-band connectivity.

September 19, 2016

Expanding functionality of IoT networks, SimpleLink™ CC1350 combines Sub-1 GHz transceiver and Bluetooth low energy radio, as well as ARM® Cortex®-M3 core in single, Flash-based, 4 x 4 mm QFN package. Device offers range up to 20 km on coin cell battery for building and factory automation, alarm and security, smart grid, asset tracking, and wireless sensor network applications. Sleep current of 0.7 µA allows for more than 10 years of battery life. Read More

Computer Hardware & Peripherals

Automotive MCUs enable secure body electronics networking.

September 15, 2016

In addition to supporting Controller Area Network Flexible Data-rate (CAN FD) standard, Traveo™ S6J342xxx series addresses need to secure data on in-vehicle networks via enhanced Secure Hardware Extension (eSHE) support that prevents unauthorized connections to ECUs. These microcontrollers, based on ARM® Cortex®-R5 core with 132 MHz performance, leverage 40 nm embedded charge-trap (eCT™) Flash technology and feature up to 1 MB high-density embedded flash for application storage. Read More

Computer Hardware & Peripherals

Electronic Key Cabinet Touch System features upgraded CPU.

September 14, 2016

With upgraded processor and operating system, KeyWatcher® Touch Gen2 offers accelerated sync time when encrypting and decrypting communication data. Lists of keys or users in selection screens also show more quickly and key selection by number/name is more responsive. Six USB ports support up to 32 GB high speed flash drives for efficient data transfer. CPU fully supports gigabit networks as well as dedicated remote display video cable with max length of 40 ft. Read More

Computer Hardware & Peripherals

Sensor Concepts Inc. Selects Acromag's Processor Board for Use in their New InfiniSCAN Product Line.

August 29, 2016

Acromag's XCOM-6400 rugged COM Express processor featuring an extra-thick circuit board, advanced thermal management, and extended operating temperature is the ideal high-performance processor for the InfiniSCAN. Sensor Concepts Inc., a manufacturer of dedicated inspection equipment used by the DOD for maintenance of their Stealth fleets, is in development of a new line of integrated...Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Multi-Purpose DSP targets compute-intensive SoC designs.

July 28, 2016

With Xtensa instruction-set architecture, quad 32-bit integer MACs, and quad single-precision 32-bit floating-point MACs, Cadence® Tensilica® Fusion G3 Digital Signal Processor supports compute-intensive applications including radar, imaging, and mid- to high-end audio pre/post-processing. Unit offers comprehensive data-type support with auto-vectorization. DSP provides real-time control with flexible memory system, integrated DMA controller, and memory protection unit. Read More

Computer Hardware & Peripherals, Mechanical Components & Assemblies

Media Alert: Cadence to Showcase Multi-Purpose, Low-Power DSP at Linley Mobile & Wearables Conference 2016

July 25, 2016

SAN JOSE, Calif. - Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that David Heine, senior design engineering architect, is scheduled to present a paper on multi-purpose, low-power DSPs for mobile and other markets at the Linley Mobile Wearables Conference on July 27, at the Hyatt Regency in Santa Clara, CA. The two-day conference runs July 26-27. WHAT: David Heine is scheduled...Read More

Computer Hardware & Peripherals, Controls & Controllers

Microcontrollers feature core independent peripherals.

June 29, 2016

Available in 4 x 4 mm package options, 32-bit PIC32MM Series includes core independent peripherals such as Configurable Logic Cells and Multiple-output Capture Compare PWMs, which help enable sensorless BLDC motor control applications. Devices have sleep modes down to 500 nA for applications demanding low power and extended battery life. To help simplify and accelerate designs, microcontrollers are supported by Microchip MPLAB® Code Configurator. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Multicore Processors optimize audio system applications.

June 20, 2016

Using 2 SHARC+ cores and advanced DSP accelerators, ADSP-SC57x/ADSP-2157x Processors deliver greater than 6 giga-floating-point operations/second. Combination of SHARC technology with ARM® Cortex-A5 system control capability provides solution for complex applications such as Dolby Atmos®, DTS:X®, or active noise cancellation with headroom remaining for further audio post-processing. Devices are equipped with more than 2 MB of on-chip memory and consume less than 2 W at Automotive temperatures. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

COM Express Module supports Intel Celeron N3xxx processors.

June 9, 2016

Allowing OEMs to upgrade products while using existing carrier board, MB-73450 has Type 6 pin-outs and supports dual- and quad-core SoC processors, including Intel® Celeron® and Pentium® N3000 series (4–10 W), as well as Intel Atom® quad-core x5-E8000 CPUs with turbo-boost frequencies from 2.0–2.56 GHz. Other features include up to 8 GB non-ECC dual-channel DDR3L, support for up to 3 independent displays (DDI, LVDS), multiple I/O options, and expansion interface supporting 5 PCIe X1 slots. Read More