Ramtron International Corp.    Colorado Springs, CO 80921
Apr 16, 2009 Model FM24V05 512 Kb and FM24V10 1 Mb FRAM products are serial nonvolatile units in 8-pin SOIC packages that utilize I²C communication interface. They feature NoDelay(TM) writes, unlimited read/write cycles, and power consumption of 2.0-3.6 V with active current of less than 150 mA at 100 KHz, 90 mA in standby, and 5 mA during sleep mode. Operating in temperatures from -40 to +85°C, units support up to 3.4 MHz bus speed and provide data retention for over 10 yr.

Hagiwara Sys-Com Co., Ltd.    Aichi   Japan
Apr 15, 2009 Evaluation kit for CFast(TM), which is CompactFlash® that utilizes SATA interface, helps companies prototype and evaluate systems that meet needs of SBCs featuring SerialATA (SATA) storage interface. Components include CFast card (model HFD10S) and CFast to SATA adapter that converts CFast 7 + 17 pin connector to standard SATA interface.

Delkin Devices, Inc.    Poway, CA 92064
Mar 17, 2009 VideoPro(TM) Flash memory cards, available in SDHC(TM) (high capacity) format, are optimized for capturing high-definition video at 1080 resolution. Speed, capacity, and reliability are made possible via use of SLC NAND flash products, controller design, and QC guidelines based on ISO:9001 standards. Offered in 4 GB/1 hr, 8 GB/2 hr, 16 GB/4 hr, and 32 GB/8 hr on HD Standard setting for SDHC(TM) format, cards deliver respective HD high, standard, and extended speeds of 13, 9, and 6 Mbps.

Men Micro Inc.    Lago Vista, TX 78645-4160
Mar 13, 2009 Used in data-intensive applications, 32-bit/33 MHz P512 provides real-time redundant memory storage across multiple computers in networked system. Data security and memory capacity are increased since memory elements can be read from and written to different processors simultaneously as well as shared among PCs. Each module offers 32 MB soldered, FPGA-controlled DDR2 SDRAM and one LVDS channel with 230 MHz 86 MB/s connection speed.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Mar 12, 2009 Available in densities of 1 or 2 Kbits, 24VLXX series has operating current below 400 µA and offers operating voltage down to 1.5 V for read and write operations. Models 24VL014/024/025 can be ordered with full-array write protect, while 24VL014H/024H support half-array write protect. Each device is available in 8-pin SOIC, MSOP, PDIP, or 2 x 3 mm TDFN package and has operating frequency of 100 kHz @ 1.5 V. Characteristics help extend battery life in portable/handheld applications.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Mar 10, 2009 Equipped with EUI-48(TM) and EUI-64(TM) compatible MAC addresses, Models 24AA02E48, 25AA02E48, and 11AA02E48 provide up to 1.5 Kb of EEPROM and work on standard busses, such as SPI, I2C(TM), and UNI/O® bus. MAC addresses are write-protected and eliminate need for serialization and programming. Featuring built-in 48-bit Extended Unique Identifier to identify hardware's physical address, EEPROMs are suited for applications involving Ethernet, 802.11 WiFi(TM), Bluetooth®, FireWire, and ZigBee®/IEEE 802.15.4(TM).

Sanmina-Sci Corp.    San Jose, CA 95131
Mar 03, 2009 Providing non-volatile protection of RAID cache data during power failure, ArxCis-NV(TM) consists of JEDEC edge compatible registered DRAM module with ECC, paired with embedded SSD for data backup. If voltage drops below defined level, backup function is activated, and supercapacitors provide enough power for DRAM, NAND, and logic to transfer data into non-volatile flash. SATA bridge transfers data at rate of 80 MB/sec to SLC NAND, which retains data dump from DRAM for up to 10 yr.

Kingston Technology Co., Inc.    Fountain Valley, CA 92708
Feb 26, 2009 Measuring 0.43 x 0.59 x 0.039 in., 16 GB microSDHC Flash memory card can store approximately 3,000 digital songs, 9,000 images from 5MP cameraphone, or up to 16 hr of video in FAT 32 format. It is compliant with SD Specification v2.00 and rated Class 2, with 2 MB/sec minimum sustained data transfer rate. Unit operates in temperatures from -13 to +185°F. When combined with adapter, it can be used as full-size SDHC card.

Corsair Memory    Fremont, CA 94538
Feb 16, 2009 Designed to accommodate requirements of PC enthusiasts and high-end gamers, Dominator GT series comes in 3-6 Gb kits running at 2,000 MHz with latencies of 7-8-7. Dual-path Heat eXchange (DHX) technology includes single-piece heat-sink and removable cooling fins. Latter allows for multiple cooling options, including water and custom-designed thermoelectric cooling system to actively cool modules to as low as 20°C below ambient temperature for optimal overclockability.

Evatronix SA    Bielsko Biala   Poland
Feb 12, 2009 Available as single IP core, SDIO-HOST is suited for any memory card or SDIO application. Support for CPRM mechanism is realized through implementation of Cryptomeria cipher algorithm for symmetric data encryption. With set of wrappers for AMBA® AHB, APB, Avalon, and Wishbone, core can be reused in different design environment within one multiuse license. Support for MMC 4.2 guarantees compatibility with MMC-Plus memory cards, and enables data transfer rates to 400 Mbit/s.

Ramtron International Corp.    Colorado Springs, CO 80921
Feb 05, 2009 Featuring serial I²C memory interface, RoHS-compliant FM24L256 is 256 Kb nonvolatile ferroelectric random access memory (FRAM) device used for data collection that operates from 2.7-3.6 V. It reads and writes like RAM and provides data retention for 10 years. Write operations are performed at bus speed without delays and do not require internally elevated power supply voltage for write circuits. Next bus cycle can start immediately without need for data polling.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Feb 03, 2009 Featuring SPI interface and 20 MHz bus speed, 23 x 40 Models 23A640 and 23A256 have operating voltage range of 1.7-1.95 V, while 23 x 56 Models 23K640 and 23K256 feature operating range of 2.7-3.6 V. Available in 8-pin SOIC, PDIP, and TSSOP packages, units only use 4 MCU pins. All 8- and 32-KB devices are suited for applications involving bulk data transfers, DSP and other math algorithms, audio/video, speech encoding, VoIP, and Internet.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Jan 23, 2009 Manufactured with 43 nm process technology, single-level cell (SLC) NAND flash memories are available in 16 models with densities ranging from 512 MB to 64 GB. Units can read and write large amounts of data at high speed and are suited for use in mobile phones, flat panel TVs, OA equipment, and servers. Models in BGA and TSOP I packages are available.

Ramtron International Corp.    Colorado Springs, CO 80921
Jan 23, 2009 Pin-compatible with asynchronous static RAM (SRAM), RoHS-compliant FM22LD16 is 4 Mb ferroelectric random access memory (FRAM) with access time of 55 ns and cycle time of 110 ns. Device reads and writes at bus speed for NoDelay(TM) writes, with endurance of at least 100 trillion writes and 10 year data retention. Resistant to moisture, shock, and vibration, 3 V SMT solution also offers high-speed page mode that enables 4-byte burst read/write operations at up to 40 MHz.

Kingston Technology Co., Inc.    Fountain Valley, CA 92708
Jan 15, 2009 Offered in 3 and 6 GB kits (part No. KHX16000D3ULT1K3/6GX and KHX16000D3ULT1K3/3GX respectively), HyperX® 2 GHz memory carries CAS latency of 8 for optimal performance in Core i7 and X58 platforms. Both kits fully utilize T1 heatspreaders' HyperX Thermal Xchange (HTX) technology to maximize system functionality at 1.65 V in Core i7-based motherboards.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Dec 12, 2008 While 16 GB microSDHC memory card (SD-C16G) delivers Class 2 SD speeds, 8 and 16 GB SDHC memory cards (SD-F08G and SD-F16G, respectively) deliver Class 6 SD speeds. All cards are compliant with SD memory standard v2.00, integrate CPRM copyright technology, and operate from 2.7-3.6 V power supply. MicroSDHC card, with max write speed of 6 MB/sec, is suited for mobile phones, while SDHC memory cards, intended for other digital consumer products, support max write speed of 20 MB/sec.

NVIDIA Corp.    Santa Clara, CA 95051
Dec 12, 2008 Equipped with 192 CUDAT parallel computing cores, Quadro® FX 4800 suits mechanical computer-aided design (MCAD), digital content creation (DCC), and broadcast applications. It offers 128-bit precision graphic pipeline and 32x FSAA, dual 10-bit display ports, and single dual-link digital display connector for ultra-high resolution panels of up to 3,840 x 2,400 at 24 Hz. CUDA architecture allows for real-time ray tracing, video encoding, and interactive volume rendering.

Strategic Test Corporation    Woburn, MA 01801-1915
Dec 02, 2008 Development Kit-5 supports both Linux 2.6 and Microsoft Embedded Windows CE 5.0 and 6.0. TX27 SODIMM module contains 400 MHz i.MX27 processor, 64 Mb mobile DDR-SDRAM, 128 Mb NAND Flash memory, 10/100 Ethernet MAC, USB 2.0 Host/OSG, LCD controller, and MPEG4 H.263/H.264 hardware CODEC for D1 video and camera interface. Other features included in kit are socket for TX27 SODIMM, UCB1400 CODEC, touchscreen controller, 2 SD card sockets, LCD 40-pin header, and 2 RS232 headers.

Ramtron International Corp.    Colorado Springs, CO 80921
Nov 24, 2008 Available in RoHS-compliant, 32-pin TSOP-I package, FM28V100 is 128K x 8 nonvolatile ferroelectric random access memory (F-RAM) that reads and writes as standard SRAM and retains data after power is removed. It operates from 2.0-3.6 V over -40 to +85°C range and features NoDelay(TM) writes, virtually unlimited read/write cycles, 24-bit device ID, and software-controlled write protection. Data is retained for 10+ years without need for battery.

Ramtron International Corp.    Colorado Springs, CO 80921
Nov 24, 2008 Housed in 8-pin SOIC package, Model FM25V05 consists of 2.0-3.6 V, SPI non-volatile RAM that features 1E14 read/write cycles and performs write operations at bus speeds without write delay. Data can be written continuously up to 40 Mbps. Operating over industrial temperature range of -40 to +85°C, device consumes 3 mA while running at 40 MHz SPI clock rate, 90 µA during standby, and 5 µA during sleep mode. Typical active power consumption is 38 µA per MHz.