IXYS Corp.    Santa Clara, CA 95054 2704
Mar 22, 2012 Operating from supply as low as 2.7 V, CPC5903 isolates 2 open-drain logic signals while providing 3,750 Vrms of galvanic isolation. Product enables isolated bidirectional I²C data signal and unidirectional clock signal, supports standard- and fast-mode I²C data rates, does not require any internal clocking, and supports direct static-state buffering without refresh clocks. Solution can also function as logic level translator for levels from 2.7-5.5 V.

Tripp Lite    Chicago, IL 60609
Aug 18, 2011 Featuring local transmitter and remote/repeater unit, VGA over Cat5 Extender/Repeater Kit allows signal to be extended initial 1,000 ft at 1,024 x 768. Remote/repeater units can then be connected, allowing signal to be regenerated additional 1,000 ft, with up to 5 monitors (1 local, 4 remote) located at different points in daisy-chain. Using Cat5e/6 cable for installation, kits are suited for digital signage applications in classrooms and retail environments.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
May 06, 2011 PowerWise repeaters are offered as model DS80PCI402 with 4 bidirectional channels, DS80PCI800 with 8 channels, and DS80PCI102 with 1 channel. Delivering 65 mW/channel power consumption, all support selectable 3.3 or 2.5 V single-supply voltage. Receive equalization gain is up to 36 dB and transmit de-emphasis is 12 dB, with both performing on each lane to compensate for channel loss. Repeaters enable up to 40 in. FR-4 backplane reach to simplify migration to PCIe Gen-3 data rates.

Netgear Inc.    Santa Clara, CA 96054
Feb 22, 2011 Model MSRB2500 Mobile Smart Repeater offers multi-carrier HSPA+ support, simultaneous voice and data boosting, and maximized internal antenna sensitivity and power output. Unit also offers data rates which maximize handset battery life and provides high-performance indoor coverage. Optional external antenna and device management tools are available.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jan 28, 2011 Powered by SiGe BiCMOS process, PowerWise® repeaters provide 36 dB equalization gain, consume 55 or 65 mW/channel, and deliver 20 m reach over 24-AWG cable. They enable data bandwidth up to 10.3125 Gbps by performing receive equalization and transmit de-emphasis. The DS100BR410 has 4 unidirectional channels and supports 2.5 V single-supply voltage, while DS100BR210 (2 unidirectional channels) and DS100BR111 (1 bidirectional lane) support 3.3 and 2.5 V supplies.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Dec 02, 2010 Intended for wireless corrosion monitoring systems, Microcor Wireless Extender (WE) offers means to expand mesh networks when outlying wireless devices exceed range of mesh formed by other nodes and gateway. It is certified for Class I/Zone 1 hazardous locations and integrates with wireless devices via WirelessHART 7 protocol. With typical life of 3 years, WE offer typical wireless range of 1,000 ft with clear line of sight with up to 3 hops permitted from originating node to gateway.

Hawking Technologies Inc.    Irvine, CA 92618
Aug 17, 2010 Offered as one weatherproof outdoor unit, HOWABN1 functions as outdoor wireless-n access point, universal repeater, or Ethernet bridge. It features PoE connection and includes wall and pole mounting kits to facilitate installation and setup. Capable of 300 Mbps speeds, product incorporates 2 high-gain outdoor antennas, one PoE DC injector, and L-shape antenna connector. Gasket kit, power and Ethernet cables, and power transformer are included.

Hawking Technologies Inc.    Irvine, CA 92618
Aug 10, 2010 Featuring heavy-duty, waterproof design, HOW2R1 Wireless-300N Repeater connects and repeats any 802.11 b/g/n Wi-Fi network while eliminating wireless dead spots. Unit is engineered with 2 Wi-Fi radios, one for picking up signals from wireless source and one for repeating wireless signals. Repeater also includes 3 antennas, one 11 dBi built-in antenna dedicated to receiving wireless signals and two 5 dBi external antennas for rebroadcasting wireless signals.

Ethernet Direct    Newburyport, MA 01950
Aug 09, 2010 Suited for factory floors and industrial office complexes requiring aesthetic design, Falcon FWI-705 links 2 or more separate networks to create single expanded LAN network. Unit features built-in 4 dBi directional antenna and supports 3 different operation modes, including Access Point, Repeater, and AP + WDS. To secure information, product comes with 64/128/152-bit WEP encryption and WAP function. Falcon FWI-705 is compliant with IEEE 802.3, IEEE 802.3u, and IEEE 802.11b/g standards.

WABCO Holdings Inc    Piscataway, NJ 08855
Jul 01, 2009 CAN Repeater and Router leverage Controller Area Network (CAN) in-vehicle communications to accelerate transmission of truck's electronic braking signals to trailer's braking system. While CAN Repeater enables faster electronic transmission of braking signals in extra long trailers used to transport over-sized cargo, CAN Router provides faster data transmission for truck-trailer combinations with 2 or more trailers equipped with electronic braking systems (EBS).

Acromag, Inc.    Wixom, MI 48393 7037
May 27, 2009 Designed for Johnson Controls N2 or BACnet MS/TP bus control systems, Model 4683-TTM-3F drives up to 32 RS-485 devices while isolating and boosting signals up to 4,000 ft. Operation is transparent to all devices and no handshaking or extra control lines are required. Offering electrical surge protection with 1,500 Vac isolation, unit shields host computer from noise spikes and other transient signals. Baud rates of 600, 1,200, 2,400, 4,800, 9,600, 19.2K, 38.4K, and 76.8K are switch-selectable.

Atlona Technologies    San Jose, CA 95131
Apr 22, 2009 Featuring LAN Loop-Out, AT-HD50RSL HDMI Extender over single Cat5/6 receiver unit works with AT-HD50SS transmitter unit, which runs HDMI over single CAT5/6 with local video output. Units support resolutions up to 1,080p with no signal degradation and are suitable for extending HDMI signals to different HD displays. With cascadable design, devices can transfer Audio and HDMI Video signals over CAT5 from source to display by daisy chaining for deployments in excess of 300 displays.

Advantech Automation Corp.    Cincinnati, OH 45240
Mar 10, 2009 Acting as 802.11 b/g access point, EKI-6311G allows wireless devices to communicate with each other and 10/100Base-TX Ethernet wired networks. Client bridge operation connects one or more wired devices to wireless network, and wireless repeater functionality combines both formerly mentioned modes to extend wireless coverage areas. Supplied in IP65-rated, weatherproof plastic enclosure, multifunctional unit supports various enterprise security standards and may be managed via SNMP.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 28, 2008 Model 4154 HP Fiber Repeater with RS232 Monitor Port is used to regenerate data signals in order to extend range to greater than 1,640 ft between optically linked data terminals and may also be used to monitor network traffic. Fiber optic communication standard allows data transmission that is unsusceptible to electrostatic/electromagnetic fields, and RS-232 monitor port is protected from damage by potential differences. Fiber connections are via 2 standard Versatile Link connectors.

Video Products, Inc.    Aurora, OH 44202
Jul 03, 2008 Supporting data transfer rates up to 800 Mbps, 1394B-HUB-3 FireWire hub/repeater allows user to connect and swap 2 FireWire devices to single computer without rebooting. When used as repeater, it doubles maximum range of FireWire cable from standard 14.75 ft to 29.5 ft, and multiple units can be cascaded to extend range up to 236 ft. Unit features circuitry designed to protect equipment from ESD, and supports plug-n-play specifications.

Thinklogical    Milford, CT 06460
May 13, 2008 Designed for broadcast and post-production, ImageEvolution video processor is suited for image correction and scaling while also functioning as video converter that supports HDMI, SDI, and HD-SDI. It has Gennum VXP(TM) image processor and offers multi-mode fiber ports for video extension up to 3,280 ft. Also available, ImageEvolution HDMI Repeater for distribution of one of 2 HDMI/DVI video sources to 4 digital displays, simultaneously, with identical reproduction and no signal loss.

Coiler Corporation    Taipei Hsien   Taiwan
Oct 10, 2007 Including Models BR-900 and BR-1800, BR Band Selective Repeaters feature up to 80 dB gain and UL/DL output power of +20 dBm. Automatic Gain Setting (AGS) function enables units to adjust UL gain level automatically according to DL path loss, ensuring that UL path does not produce any interference to BTS under any kind of installation environment. All settings can be adjusted via integrated keypad that is located on front panel.

Meraki Networks, Inc.    Mountain View, CA 94041
Aug 22, 2007 Meraki Outdoor repeater and Meraki Solar accessory kit together can cover entire neighborhoods with Wi-Fi access. Meraki Outdoor is indoor/outdoor repeater that supports high gain and directional antennas. It features long range support (400-700 ft, 6-18 miles range with antenna), 2 x 100 Mbit Ethernet ports, and Dual SSID. Solar accessory kit enables consumers to power outdoor Wi-Fi with solar energy and allows repeater to broadcast signal without being connected to any electrical source.

Andrew Corp.    Orland Park, IL 60462
Jul 05, 2007 Self-diagnosing and self-adaptive Node C is designed for operators who are converting networks from legacy analog protocols to CDMA-450 and FLASH-OFDM(TM) digital standards and new carriers considering 450 MHz standards. Interference cancellation equipment minimizes isolation requirements between donor and coverage antennas. Suited for applications where higher data rates are required and to fill gaps in network coverage, unit operates with 5 W of output power.

CellAntenna Corporation    Coral Springs, FL 33065
Jun 07, 2007 MOFORSAS Multiple Output Fiber Optic Repeater Smart Antenna System provides clear communication to disaster recovery teams in extreme, hostile conditions such as building collapse, mining accidents, hurricanes, and similar harsh situations. Designed to bring radio communication signals from outside building and carry it into deep interior locations where no signal exists, it can achieve band range of 380-2,500 MHz. Military version with features for battlefield conditions is also available.