Interface Converters

Electrical Equipment & Systems, Computer Hardware & Peripherals

Snap-In Panel Mount Cables accelerate secure installation.

July 22, 2015

Reducing installation time for system builders and system integrators, Snap-In Cables are designed so that they can snap into properly sized bulkhead opening without requiring any nuts, screws, or tools while producing secure fit and clean look. This panel mount cable line includes single and dual USB cables and Ethernet cables. Read More

Computer Hardware & Peripherals, Controls & Controllers

USB 3.0 Hub Controller comes in 6 x 6 mm BGA package.

December 29, 2014

Intended for mobile and consumer devices, EZ-USB® HX3™ offers full configurability via I²C EEPROM, I²C Slave, and GPIO options. Ghost Charging allows device charging without host, and Accessory Charger Adaptor Dock enables upstream charging for portable devices with USB OTG host. Other features include Shared Link, which enables up to 8 downstream ports; support for USB-IF Battery Charging v1.2 specification and charging of Apple devices; as well as configurable USB 2.0 and SuperSpeed PHYs. Read More

Safety & Security Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems

Panel Mount USB Cables feature ground wires.

November 24, 2014

Offered in 0.3, 0.5, 0.75, 1, 2, and 3 m lengths and suited for use inside box or enclosure, USB 2.0 panel mount cables are available with ground wire for option of electrically grounding USB female connector to panel or enclosure. Molded, panel-mountable construction features 20 AWG power conductors and 28 AWG twisted pair data conductors all under double shield for maximum EMI resistance. Cable is light gray, and each assembly includes two 4-40 x 3/8 in. Phillips pan head mounting screws. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Right-Angled USB Cable Line serve confined-space applications.

July 24, 2014

Suited for tight-fit and confined-space applications, black 90° angled USB cable assemblies come in all 4 mold options for type A and B connections and feature USB 2.0-compliant, 24 AWG power leads. Areas of use, along with specific OEM applications, include PC peripheral interconnects, test and measurement, DAQ, portable data storage, and printer interface. There are 14 connector angle combinations available as stock cables; additional connector angle combinations can be custom produced. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

USB Charging Station accommodates up to 4 devices.

June 12, 2014

FUEL Station mini 4-Port USB Charge Base enables simultaneous charging of up to 4 USB-powered devices – tablets, smartphones, Bluetooth™ speakers, cameras, and others – from one wall outlet. Along with built-in power supply, portable solution features integrated over voltage, over current, over temperature, leakage, and short circuit protection to ensure mobile device is safe while charging.
Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Mini-USB Cable Assembly is sealed to IP67/68/NEMA 250 (6P).

June 10, 2014

Sealed to IP67 and IP68/NEMA 250 (6P) when mated, Data-Con-X® sealed mini-USB cable assembly features quick connect bayonet style interface. RoHS-compliant and pre-assembled cable, offered with 3 standard cable assembly options, mates with field installable Mini-USB panel connectors. In addition to military or industrial GPS location devices, uses include instrumentation, medical data cart, DAQ unit, and general industrial electronic applications. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Mounting & Attaching Products

Extension Cables target USB 2.0 micro B enabled peripherals.

May 28, 2014

Offered in lengths of 0.3, 0.5, 0.75, 1, 2, and 3 m, USB 2.0 Micro B Extension Cables are male-to-female cables used to extend phone charger cables and other USB 2.0 micro B enabled peripherals. They can also be used to extend plug-in wall chargers that have short, fixed length cords.  To provide protection against EMI/RFI, each cable incorporates foil plus braid shielding. All 5 connector positions are integrated to ensure proper functionality in every application. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

LSZH USB 3.0 Cables offer 3 interface options.

February 28, 2014

Available with USB 3.0 Type A, Type B, and Type Micro B interfaces, USB 3.0 Cables feature Low Smoke Zero Halogen jackets, which reduce amount of toxic and corrosive gases emitted during combustion, and will self extinguish after catching fire. LSZH is popular anywhere protection of people and equipment from acidic smoke and fumes is critical. Supporting throughput up to 4.8 Gbps, cables minimize time required for transferring large amounts of data or video. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Panel Mount Cables feature 2 mm pitch PCB header connectors.

February 11, 2014

With pre-installed 5-pin, 2 mm pitch connector, USB 2.0 UPM Style Panel Mount Cables make board-to-box USB connections. Cables are double shielded for maximum EMI resistance and power conductors are 26 AWG to accommodate crimp contacts. Each assembly includes two 4–40 x 3/8 in. Phillips pan head mounting screws. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

USB Cables feature flat design for tight spaces.

January 21, 2014

USB 2.0 compliant and backward compatible with USB 1.1 standards, Super Flat USB Cables support speeds up to 480 Mbps and full 500 mA current. Cables are 0.055 in. thick and 0.19 in. wide for use in tight spaces. Available in 3, 6, and 10 ft lengths, cables offer variety of connector pairing options, including male USB Type A to female USB Type A; male USB Type A to male USB Type A; male USB Type A to male USB Type B; and male USB Type A to male USB Type micro B. Read More

Computer Hardware & Peripherals, Communication Systems & Equipment, Optics & Photonics

HP Fiber to RS232 Converter offers 120 Kbps data transfer rate.

January 17, 2014

Providing electrical-to-optical and optical-to-electrical conversion, Model 4139 is used to connect fiber optic linked terminals to controller with RS232 interface port. Unit uses DB9 connector for RS232 connection and provides full galvanic isolation between connected devices. Maximum link distance is greater than 1,640 ft with 2.00 mm hard clad silicon fiber cable. Measuring 5.5 x 2.25 x 1.0 in., converter includes red LED status display and 120 Vac, 60 Hz external wall-mount power supply. Read More

Computer Hardware & Peripherals

USB Charger has 4 vertical USB ports, 4.2 A charging capacity.

October 15, 2013

Able to simultaneously charge up to 4 USB devices, 4-Port USB Charger is engineered to fit in standard wallbox and use standard wallplate. It can be multi-ganged with any wiring device. Microprocessor and smart chip technology enable charger to recognize and optimize charging of tablets, smartphones, mobile phones, e-readers, digital cameras, and other electronic devices. Spacing between ports provides room to maneuver when inserting cables and reduces stress on cables once positioned. Read More

Computer Hardware & Peripherals

USB Cables feature reversible type A connector.

September 3, 2013

Able to facilitate and accelerate connections, reversible USB cables connect to USB port in either direction. Models come in lengths up to 10 ft and are also available with micro and mini connector types connector types to accommodate needs of any USB device. Featuring USB 2.0-compliant design, products supports transfer rates up to 480 Mbps. Angled connector versions are also available to help conserve space. Read More

Computer Hardware & Peripherals

Multi-Port USB Hub syncs up to 10 devices to one computer.

August 8, 2013

Intended for use with Infinity Mobile Device Cart (MDC), WoodWare A-USB Hub obtains maximum performance from multiple USB 2.0 devices connected to one computer. This 10-port high-speed USB hub has 2 swivel ports and one AC adapter, allowing user connect up to 10 USB devices to one USB port on notebook, PC, or MAC. Functionality meets/exceeds USB 2.0 specifications for data transmission rates up to 480 Mbps, and integrated current protection safeguards equipment from over-voltages. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Interface Board supports Ethernet to Modbus communication.

August 8, 2013

Housed in Minibox case that can be rack mounted in 1U high space, Model 9099 enables users to control Modbus RTU devices over company network or over Internet. As VXI-11 Interface, unit lets user send simple read-write messages over network to control and query slave Modbus devices. As Modbus TCP/IP to Modbus RTU converter, 9099 provides transparent data path from any PLC or PC with Modbus TCP/IP capability to Modbus slave device. Conversion from VXI-11 to Modbus TCP/IP protocol is automatic. Read More

Computer Hardware & Peripherals

Multi-Chip Solution performs for USB-to-RS232 interfacing.

July 18, 2013

USB-DUO bundles USB bridge controller ICs with RS232 transceiver IC, providing platform for creating USB-to-RS232 converter cabling systems supporting speeds up to 250 Kbps. While FT231XS provides USB-to-UART conversion operation, FT3243S transceiver provides digital-to-RS232 conversion – translating 3.3 V level UART signal from FT231XS to RS232 voltage levels. Product operates from -40 to +85°C and draws 9 mA when active or 135 µA when FT231XS X-Chip element is in suspend mode. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

USB Controller Hub ICs simultaneously support USB2 and HSIC.

June 11, 2013

Providing programmability, UCH2 ICs enable developers of PCs and mobile devices to configure designs without external memory. Devices support both USB2 and USB High Speed Interchip connectivity, maximum battery life via low-power modes, and ability to replace wall chargers with battery charging modes, such as BC1.2, Apple®, SE1, and China charging. For applications that need to communicate over multiple protocols, ICs feature direct I/O bridging to I2C™, SPI, UART, and general-purpose I/O. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Multimedia-Capable Device turns monitors into thin/zero clients.

May 28, 2013

With dimensions similar to USB memory sticks, Ceptor™ enables users to convert any HDMI-capable TV or monitor into interactive client device. Configurable and fully manageable, this full-featured enterprise client desktop access point lets users access their virtual desktops by running ZeTOS zero client operating system. Read More

Computer Hardware & Peripherals

FC/SCSI to SATA Interface Converter has drop-in design.

April 18, 2013

Designed to meet AS9100 configuration control standards, ruggedized conversion sled converts Fibre Channel or SCSI interfaces to SATA in standard 3.5 in. form factor. It does so by mimicking 3.5 in. Fibre Channel or SCSI (50-, 68-, and 80-pin) hard drive (HD) or SSD by integrating 2.5 in. SATA HD or SSD into 3.5 in. standard form factor package. Electrical barrier prevents anything from shorting against PCBA or HD/SSD, and PCBAs are conformal coated to withstand moisture, sand, and dust. Read More

Computer Hardware & Peripherals

USB Hub, Card Reader Combo has rotatable design.

March 28, 2013

Measuring 45 x 44 x 20 mm, Just Inn 3-port USB hub and card reader combination can be rotated 180° to accommodate desktops and laptops with vertical or horizontal USB slots. Portable device is hot swappable and supports plug-and-play installation. Compatible with such operating systems as Windows® 98/SE/ME/2000/XP/7/8/Vista, MAC OS 9.2 and later, as well as LINUX, device supports USB 2.0 and data transmission rates to 480 Mbps. LED light indicates power. Read More