Minicom Digital Signage    Zurich   Switzerland
Apr 16, 2009 Able to transmit video up to 360 ft from one source to one screen or one source to 2 screens, VGA Extender meets demands for placing player PCs in secure environments, such as back rooms, while placing screens where they can be viewed by public. Solution has plug-and-play design, uses CAT5/5e/6/7 cabling, and comes with dual screen receiver. Powered from player PC's USB port, extender is designed so that its receiver can fit on back of any display device.

Motorola, Inc.    Schaumburg, IL 60196 4041
Apr 15, 2009 Featuring internal TCP/IP stack for data transfer, Firmware Over the Air support, and SSL for secure connectivity, C24 CDMA 1X module helps manufacturers to embed connectivity to Sprint network in their devices. It features on-board multimode GPS, including autonomous GPS, A-GPS, and MS-based GPS, suited for location-based wireless applications. Module enables fleet management, telematics, automation and control, remote monitoring, and other machine-to-machine applications.

GAO Tek Inc.    Toronto M1B2K4  Canada
Apr 10, 2009 Designed to support transparent non-frame structure E1 transmission, CNV-10 continuously converts Nx64k data stream to E1 PCM signals with transmission rate of up to 2,048 kbps. This framing G.703/V.35 converter displays local normal working as well as alarm status and can conduct local analog loop as well as long distant loop. Continuous time slot distribution of CNV-10 depends on data terminal rate.

IOGEAR    Irvine, CA 92618
Apr 10, 2009 USB 2.0 Printer Auto Sharing Switch comes with 2 USB cables for connecting 2 computers to one printer; switch automatically recognizes which machine print job is coming from. It does not require an external power source and has LED indicators to show which computer has USB access. Also available, 4-Port USB Net ShareStation lets small offices share resources by enabling multiple users to access up to 4 USB devices, such as external hard drives, printers and scanners, across network.

Saelig Co., Inc.    Pittsford, NY 14534
Apr 06, 2009 CE-USB USB2.0-to-RS232 adapter uses DB9 pcb pad pinout to allow updates to older serial products without any layout changes, and adds USB interface into existing serial products with no software or hardware redesign required. Device draws 35 mA from USB port, and drivers allow it to appear to operating system as additional COM port. It sends 8-bit asynchronous serial data at selectable speeds between 300-921.6 Kbps. All RS-232 signals, including handshakes, are available.

Targus Inc.    Anaheim, CA 92806
Apr 02, 2009 Comprised of mini accessories, Netbook Accessory Kit includes Slipskin Peel Mini-Netbook Case measuring 11.25 x 0.98 x 8.75 in. and made of neoprene to shield netbook from scratches and dust. Ultra Mini USB 2.0 Hub lets user simultaneously connect up to 4 devices to netbook and offers transfer rate of 480 Mbps. Featuring standard USB connection, Ultra Mini Retractable Optical Mouse measures 3 x 1.4 x 0.9 in. and has retractable cable that helps prevent cord clutter.

Sealevel Systems Inc.    Liberty, SC 29657
Mar 27, 2009 Supplied in ruggedized, overmolded enclosure with 44 in. cable fully shielded against RFI/EMI, SeaLINK®+232-DB9 single-port USB to RS-232 serial adapter is powered by USB port and appears as standard COM port to host computer. Features include programmable baud rate, data formats with 128-byte transmit and 384-byte receive buffers, compatibility with all standard PC baud rates, and support for high-speed communication to 921.6 Kbps.

Electro Standards Laboratories    Cranston, RI 02921 3403
Mar 27, 2009 CellMite® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15 K samples/sec, and 12 additional 12-bit analog input channels with throughput of 1 M samples/sec. Supporting direct PC or network communication via USB, RS232, RS485, and Ethernet data channels, board offers 16-bit analog output channels with user specified scaling and offset, with range of ±10 V. Rugged board operates from -40 to +85°C, and features 1 MWord of onboard memory.

Silex Technology America, Inc.    Salt Lake City, UT 84047
Mar 26, 2009 Supporting up to 1,920 x 1,200 WUXGA resolution, NetDA-1 connects any display with VGA interface to wireless/wired LAN, making it available to work with PC anywhere in network. It can remotely display desktop image to connected monitor from virtually connected PC, and when used in mirror mode, connected units can deliver PC desktop image to up to 6 separate monitors. Supporting 2 hi-speed USB ports, unit can also network USB devices such as mice, keyboards, speakers, or web cameras.

Electro Standards Laboratories    Cranston, RI 02921 3403
Mar 20, 2009 ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact desktop version, as well as board only version (Model 4153) for embedded applications.

Microstar Laboratories, Inc.    Bellevue, WA 98004-3039
Mar 13, 2009 With Model MXSB 074, signals can be transmitted on up to eight 4-20 mA current loops for real-time control of machinery or process equipment as well as automated test of sensors and process equipment. Unit derives each current output from 16-bit DAC on each channel and provides channel-to-channel isolation. MSXB 074 connects to DAP board directly controlled by PC or DAPserver. DAP can send dynamic signals to current outputs on SI module at aggregate update rate as high as 1 M updates/sec.

Advantech Automation Corp.    Cincinnati, OH 45240
Mar 10, 2009 Acting as 802.11 b/g access point, EKI-6311G allows wireless devices to communicate with each other and 10/100Base-TX Ethernet wired networks. Client bridge operation connects one or more wired devices to wireless network, and wireless repeater functionality combines both formerly mentioned modes to extend wireless coverage areas. Supplied in IP65-rated, weatherproof plastic enclosure, multifunctional unit supports various enterprise security standards and may be managed via SNMP.

One Stop Systems    Escondido, CA 92029
Mar 10, 2009 Based on redriver technology, PCI Express x16 Gen 2 Host Cable Adapter enables high-speed expansion over PCIe cable from host system to PCIe downstream device or expansion chassis. Half-card form factor enables adapter to be installed in space-constrained slot. In host mode, add-in card will accept clock as input, and in target mode, card will drive clock. Requiring no additional software, adapter is suited for applications such as video, imaging, and audio devices.

Sena Technologies, Inc.    Seoul 137-130  Korea (south)
Mar 06, 2009 Parani-UD100 class 1 type Bluetooth USB adapter supports Bluetooth Specification 2.0+EDR (Enhanced Data Rate, making it suitable for industrial applications. Bluetooth driver CD is included and unit is also compatible with other SENA Bluetooth devices. Working distance can be extended up to 1,000 m with optional replacement antenna.

Red Lion Controls    York, PA 17406 9428
Mar 06, 2009 With USB programming cards, CUB5 and PAX Panel Meters can be connected to any computer, with no serial converters or other external devices needed. Cards offer plug-and-play usability, and with Crimson® software, allow operators to set parameters, download configurations, and save program files. Cards are available separately and require user-supplied USB cord, or users can select programming kits, which include USB card, USB cable, and Crimson software.

Doodle Labs LLP    Singapore   Singapore
Mar 06, 2009 Carrier-class IEEE 802.11 a/b/g wireless mini-PCI radio modules DLM106 and DLM106, respectively, support extended frequency ranges of 4.8-6.0 GHz and 2.3-2.7 GHz and programmable 5/10/20/40 MHz channel width for operation in licensed/unlicensed bands. Rated over 1,000 mW, both radios are based on Atheros sixth generation 802.11a/b/g AR5414A chipset and include features such as Adaptive Noise Immunity, QoS, and IEEE 802.11i security standards.

Hilscher North America Inc    Lisle, IL 60532
Mar 04, 2009 Designed to fit into standard 32-pin Dual-In-line (DIL) socket, netIC series interchangeable module provides network slave connectivity for EtherNet/IP, DeviceNet, PROFIBUS, PROFINET, EtherCAT, PowerLink, SERCOS III, and CANopen. It includes two Ethernet transceivers, and exchanges data with host controller via serial communications using Modbus RTU protocol. RoHS compliant product features netX 50 processor, 8 MB SDRAM memory, and operating temperature of -20 to 70°C.

u-blox AG    Schweiz   Switzerland
Mar 02, 2009 Based on 5 positioning engine, PCI-Express Mini Card (PCI-5S) and Half Mini Card (PCM-5S) enable OEMs to provide GPS, personal navigation, services/people finder, and geo-tagging on mobile computers. SuperSense technology can track weak GPS signals to -160 dBm, while Kick Start feature enables time-to-first-fix of less than 1 sec, even with weak signals. Using anti-jamming algorithms, products are immune to noise generated by PC bus, mobile phones, and local electronic devices.

Sierra Wireless, Inc.    Richmond V6V 3A4  Canada
Mar 02, 2009 Offering downlink speeds up to 21 Mbps and uplink speeds to 5.76 Mbps, MC8700 PCI Express MiniCard is designed for OEMs integrating mobile broadband capabilities into devices for vertical market applications, including fixed wireless terminals and portable handheld devices. Card provides quad-band HSPA/UMTS and quad-band EDGE/GPRS/GSM network access for roaming on high-speed networks worldwide. Windows CE and Linux SDK support is available.

Sealevel Systems Inc.    Liberty, SC 29657
Feb 25, 2009 Providing 16 optically isolated inputs and 16 Reed relay outputs, DIO-32.PCIe can be used for PC based control and automation of equipment including sensors, switches, A/V studio automation, security control systems, and industrial automation systems. It is available in 2 versions with inputs rated for 3-13 or 10-30 V, and socketed dip resistors allow user configurable input ranges from +2 to +30 V. Board comes with 72 in. cable with DB78 male connector to DB37 male/female connectors.