National Instruments Corp.    Austin, TX 78759-3504
Jun 29, 2010 NI-XNET platform is available with PXI-8516 and PCI-8516 LIN interfaces, which enable engineers and scientists to develop Local Interconnect Network (LIN) applications in LabVIEW, LabWindows(TM)/CVI, and C/C++ for Windows® and LabVIEW RTOSs. While providing integrated support for importing and using signals from LDF databases, interfaces employ NI-XNET device-driven DMA engine for coupling LIN bus to host memory - reducing system latency to microseconds.

Axiomatic Technologies Corp.    Mississauga, ON L4Z1Z8  Canada
Jun 28, 2010 Suited for off-highway excavators, backhoes, pile drivers, or bulldozers, Bucket Positioning System (BPS) provides continuous assessment of bucket, blade or attachment position as part of complete 2D/3D OEM machine control system. It interfaces with CANopen® devices for angle sensing, and offers fast data exchange with machine control display via Ethernet. Features include operating range of 9-36 Vdc, IP67 rated sealed enclosure, and 2 CAN, 1 Ethernet, and 1 RS-232 serial COM port.

Fairchild Semiconductor Corp.    South Portland, ME 04106
Jun 28, 2010 Reducing component count, board space, and BOM for mobile handset designers, FSA2000 consists of USB 2.0 Full Speed (FS) and Hi-Speed (HS) compliant switch that integrates class AB cap-free headphone amplifier. It can also auto-switch to USB when VBUS is present to conserve power and is typically used for USB port isolation, connector sharing, and signal multiplexing in applications such as 3G cell phones, netbooks, and portable MP3/MP4 media players.

Luminary Micro, Inc.    Austin, TX 78746
Jun 25, 2010 Stellaris® LM3S9B90 and LM3S9B92 Ethernet+USB-OTG Evaluation Kits include EK-LM3S9B90 or EK-LM3S9B92 evaluation boards, as well as In-Circuit Debug Interface board. Evaluation board offers streamlined design for 32-bit Stellaris-based application with industrial connectivity, highlighting MCU's simultaneous integrated 10/100 Ethernet MAC/PHY, full-speed USB-OTG interfaces, and connection to MCU's GPIO ports. Standard size terminal headers are included for all MCU I/O to ease prototyping.

Future Technology Devices International Ltd.    Hillsboro, OR 97124-6499
Jun 25, 2010 Available in male and female versions, DB9-USB-RS232 Series features USB mini-B type connector, which fits PCB footprint of standard 9-pin DB9 connector. Modules utilize FTDI FT232R, USB 2.0-to-serial UART converter IC, which handles protocol conversion. Supporting max transfer rate of 1 MBps on RS232 interface, modules are targeted at systems equipped with legacy DB9-based RS232 connectors that face connection issues to modern PCs, laptops, and other equipment.

Cooper Crouse-Hinds Molded Products    La Grange, NC 28551
Jun 18, 2010 Connecting intrinsically safe field instruments to FOUNDATION(TM) fieldbus networks, 9370-FB Series Fieldbus Barrier utilizes High Energy Trunk technique that enables safe operation and high reliability throughout fieldbus network lifecycle. Fixed carrier assembly and pluggable components come as complete, self-contained enclosure systems in stainless steel or carbon-loaded GRP. Pluggable modules can be removed/replaced while equipment is live and without ignition risk.

J-Works, Inc.    Sylmar, CA 91342
Jun 17, 2010 Model WDT205 module plugs into internal USB port that meets Intel Front Panel I/O Connectivity Design Guide for USB port. If communication does not occur between unit and host computer or application within programmed time frame, it triggers relay to close for set amount of time. Relay event can be used to trigger warning device, turn off critical hardware, or perform system reset. Windows driver and DLL or Class Library API are included in product's software interface.

Pickering Interfaces Inc    GRANTS PASS, OR 97526
Jun 11, 2010 Suited for bulk testing of USB devices, model 40-737 uses USB Type B connector on common and USB Type A connector on 8 channels, allowing users to directly connect using industry standard USB leads. Each path is capable of supporting USB1.1 or USB2.0 with negligible impact on cabling distance supported by USB devices due to wide differential bandwidth. USB powered devices requiring highest permitted current are supported through use of low impedance power connections.

Saelig Co., Inc.    Pittsford, NY 14534
Jun 08, 2010 Enclosed in ruggedized aluminum cases that are wall, DIN-rail, or panel mountable, iCON-32300 Series extends 10/100 Ethernet circuits to 984 ft at up to 50 Mbps using existing copper telephone wire and up to 6233 ft at 1 Mbps. Units meet NEMA TS1/TS2 standard for traffic control equipment and IEC61000-6-2 EMC generic standard immunity for industrial environment. Operating from -40 to 75°C, extenders are suitable for building automation, surveillance, and digital signage.

Kontron    Poway, CA 92064
Jun 03, 2010 Eliminating need for medical LAN isolators, PCIe Medical LAN Card enables direct network connection of IT equipment to medical devices. PCIe 2.0-compliant solution, suitable for installation in any PCIe x1-compatible card slot, incorporates galvanic separation according to IEC60601-1 standard and is offered with one or 2 isolated Ethernet 1000Base-T interfaces on RJ45 connectors. Both variants are based on Intel 82574L GbE controller, which optimizes compatibility and transfer rates.

Advanced Micro Peripherals    New York, NY 10001
Jun 02, 2010 Compact and rugged CAN4000-8S provides 4 independent, fully isolated CANbus channels and 8 non-isolated RS-422/485 serial ports, and serves as universal PC/104-Plus add-in card with 3.3 V host interface (with 5 V tolerance) to host computer. Driven by SJA1000 CAN 2.0B controllers, each CANbus channel includes fully isolated CANbus transceiver powered from external 5 V supply. Serial channels support either RS-422 full duplex or RS-485 half duplex standards, and baud rates to 10 Mbps.

Loadstar Sensors, Inc.    Mountain View, CA 94043
May 28, 2010 Digital load cell interface model DI-100U converts analog millivolt output from resistive load cell into PC-compatible USB output. After direct connection to load cell, unit can seamlessly acquire calibrated load data in lb/N/kg. Integral 16-bit ADC enables better than 0.1% load cell accuracy, and on-demand or continuous load display modes are available. Unit is compatible with PCs running Windows XP/Vista.

Inovonics Wireless Corp.    Louisville, CO 80027
May 24, 2010 Model EN7286NX enables up to 192 points of EchoStream network to communicate directly with GE NetworX control panels NX-4/-6/-8/-8E. It enables individual wireless point annunciation, assigning each device its own zone and enabling users to identify exact alarm notification origin. Transparency from panel programming perspective benefits installers, because manner in which transmitters/zones are programmed at panel is not altered from traditional wired installations.

ITT Interconnect Solutions    Santa Ana, CA 92705
May 20, 2010 Supporting Ethernet, MVB, WTB, and video line data, CIR-M12 connector handles feeds for engine diagnostics, brake controls, environmental conditioning, passenger display systems, networking, and lighting control. Connector features Quadrax QXM12 contacts rated at 3 A and maximum current of 10 A for 1 msec, while operating voltage is 100 Vdc and insulation resistance is 10 GW. Device operates in temperatures from -40 to +125°C.

Digital Monitoring Products    Springfield, MO 65803
May 18, 2010 With UL864 listing, 463G Digital Cellular Communicator can be installed as stand-alone communicator for commercial fire installations using XR500 panel. Expansion card for XR500 Series Access, Burglary, and Fire Panel has on-board communications module, which creates direct, wireless communications path to any DMP Central Station receiver over digital GSM/GPRS network. Product requires no external power supplies, enclosures, batteries, cabling, or conduit connections.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
May 13, 2010 Targeted for commercial customers, Model 1132 allows users to integrate 4-20 mA industrial sensors into their projects. Any 4-20mA sensor that does not require more than 15 V and whose capacitive load is equal to or less than 1.5 µF can be used. Output impedance is 1 KW and current consumption is 130 mA in 22 mA loop, 18.4 mA in 4 mA loop, and 1.84 mA at no load. Features include power supply range of 4.75-5.25 Vdc and max output error of ±1.2%.

Cables To Go    Moraine, OH 45439
May 12, 2010 With Wireless VGA with Integrated Audio, users can wirelessly transmit 3.5 mm stereo audio and UXGA and WSXGA video content to computer monitors, projectors, or TVs up to 30 ft away. Unit provides secure wireless connection through Ultra-Wide Band technology, making it suitable for conference room presentations. Providing video streaming up to 720p resolution, adapter supports dual monitor screen modes and native mode for playback of high-resolution video.

Sena Technologies, Inc.    Seoul 137-130  Korea (south)
May 11, 2010 Supporting serial speed up to 921.6 Kbps, DirectPort-USB UC1 consists of 1-port USB-to-RS232 converter that provides serial COM port via USB port, while DirectPort-USB UC1B consists of 1-port USB-to-RS422/485 converter for multi-drop applications. Communication distance is 15 m for RS232 and 1.2 km for RS422/485. Measuring 33.4 x 61.0, converters support Windows, Linux, and Mac, and include 16C550 UART controller and DB9 male connector with Tx/Rx LEDs.

Titan IC Systems    Belfast BT3 9DT  United Kingdom
May 11, 2010 Offered as PCIe Accelerator Card, Hyperion 10G offloads traditional software-based regular expression (regex) content analysis tasks for security applications requiring minimal factor and power consumption without compromising performance. Solution is based on Titan IC 64-bit Regular Expression Processor (RXP), which is optimized for streamed IP packet and flow processing and offers true 10 Gbps performance. It suits application in network, cloud security, and server markets.

Electro Standards Laboratories    Cranston, RI 02921 3403
Apr 30, 2010 Model HP Fiber RS-485 Converters connect fiber-optic linked terminals to controller that has RS-485 interface port. Units convert RS-485/RS-422 serial communication interface to HP Versatile Link plastic core cable. Full galvanic isolation is provided between connected devices and products feature data transfer rate of greater than 20 Kbps.