Computer Hardware & Peripherals ->
Computer Boards & Cards ->
I & O Interface Cards & Adapters|
I & O Interface Cards & Adapters
(Showing headlines 141 - 160) << 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 ...
Serial Communications Module operates with temperature switches.
Dwyer Instruments, Inc.
Michigan City, IN 46361
Apr 01, 2011
With Model TS485, users can read current temperature and parameter settings of Love Controls temperature switches. Configuration key port on temperature switch provides data signal and power for RS-485 module. For applications that require multiple temperature switches, module can be daisy chained together so that only 2 wires need to be brought to PC. Model TS485 is compatible with Series TS3, TSX3, TSF, TCS, TS2, TSS2, TSX, TSWB, TSL8, and TSDIN.
Serial Communications Boards can be seen as Windows/Linux ports.
United Electronic Industries
Canton, MA 02021
Apr 01, 2011
Serial communications boards DNx-SL-501/-508 are available with UEI-RSS Serial Server software, which makes boards accessible as standard Windows or Linux serial ports. As many as 255 serial ports can be controlled by one PC over one Ethernet port via this software, and expanded ports can be mounted remotely up to 100 m from host using standard UEI chassis or 20 kM utilizing Fiber interface cubes. Status window displays each port's status, updated once per second, as well as traffic.
VPX Carrier Cards (3U) route signals to PMC/XMC modules.
Wixom, MI 48393 7037
Mar 29, 2011
Featuring 8-lane PCIe bus Gen 2 interface, VPX4810 board routes power and interface bus signals to plug-in XMC or PMC mezzanine module through VPX computer system's card slot connector. Product supports standard IEEE-1386.1 modules and conforms to VPX VITA 46.0, 46.4, and 46.9. VITA 48 option is also available for Ruggedized Enhanced Design Implementation. Also compatible with VITA 65 OpenVPX module/slot profiles, board supports 64 I/O lines (P14, VITA 46.9) via P2 VPX connector.
PCIe Backup/Recovery Solution enhances cache data protection.
Irvine, CA 92618
Mar 22, 2011
Combining ultracapacitor technology, memory performance of DRAM, and non-volatility of flash, EXPRESSvault(TM) delivers data throughput required by cache backup applications without negatively impacting system performance. Plug-and-play solution, supplied in standard PCIe form-factor, features 50k IOPS and 1.3 GBps throughput. In addition to leveraging NVvault(TM) flash backup subsystem controller, it includes PCIe (x8 lane) adapter card with power module unit and Linux reference driver.
KVM Extender drives 2 displays up to 1 km from PC.
Matrox Graphics Inc.
Dorval Quebec H9P 2T4, CD Canada
Mar 07, 2011
Designed for process control rooms, dispatch centers, and other mission-critical environments, Extio F2208 uses fiber optic cable to separate host system from operator console consisting of keyboard, mouse, USB, audio peripherals, and up to 2 displays. Extender leverages PCIe bus interface card to deliver raw, uncompressed data over single- or multi-mode cable, enabling users to run applications at up to 2,560 x 1,600 per remote monitor.
Bridge Controller provides USB3.0 to SATAII data transfer.
Saelig Co., Inc.
Pittsford, NY 14534
Mar 04, 2011
Implemented with USB Mass Storage Class driver and UASP driver, Model PL2771 supports USB3.0 SuperSpeed 5 Gbps transfer rates between USB3.0 and SATAII devices. Internal embedded 8-bit microcontroller enables applications such as one button backup, power control, and other features for USB connection. Packaged as 48-pin QFN or 64-pin LQFP device, controller uses 30 MHz reference clock and is hot-plug Serial ATA Rev.2.6 compliant. Internal core runs on 1.2 V, while I/O lines operate at 3.3 V.
USB to UART/FIFO Interface IC facilitates peripheral design.
Future Technology Devices International Limited
Glasgow G41 1HH United Kingdom
Mar 03, 2011
Via EEPROM interface, Model FT232H can be configured to use variety of serial or parallel interfaces. In addition to UART interfacing, single-channel unit supports interfaces to synchronous IOs such as SPI, I2C, JTAG, and FPGA via built-in Multi-Protocol Synchronous Serial Engine, which supports communication speeds up to 30 Mbps. Integrated 1.8 and 3.3 V LDO regulators minimize external component requirements, while 1 KB transmitter/receiver data buffers optimize data throughput.
Development Kit builds 3D programmable logic devices.
Santa Clara, CA 95054
Feb 23, 2011
With ABAX 3PLD Development Kit, FPGA and ASIC designers can implement and test variety of parallel and serial interfaces such as DDR3 and PCI Express Gen2. Kit includes PCIe plug-in card featuring ABAX A1EC04 3PLD with 5 Ethernet 10/100/1000 ports, x1 and x8 PCIe connectors, and SFP connectors. PLD provides 390k LUTs, 5.5 MB RAM blocks, and 48 channels of 6.5 Gbps SerDes. Off-chip memory, consisting of x36 72 MB of QDRII RAM and x72 1 GB DDR3 RAM, is provided via LP-DIMM socket.
Serial Protocol Host Adapter supports 2- and 4-SPI protocols.
Saelig Co., Inc.
Pittsford, NY 14534
Feb 23, 2011
Controlled from PC via USB interface, SPI Storm can access ASICs, SoCs, FPGAs, and other digital embedded systems that use serial protocols at speeds of up to 100 MHz at I/O lines. Various serial protocols can be chosen from standard library: SPI, variants of SPI on 3 wires, as well as dual- and quad-SPI protocols. SPI Storm Studio software, included, allows user-specific definition of custom protocols, including those requiring bi-directional signal lines. Other features include 32 MB memory, 100 MHz operation, and 3 specialized ports: flexible serial, 8-bit GPO, and 8-bit input trigger.
Indoor Mobile Repeater suits business and residential users.
Santa Clara, CA 96054
Feb 22, 2011
Model MSRB2500 Mobile Smart Repeater offers multi-carrier HSPA+ support, simultaneous voice and data boosting, and maximized internal antenna sensitivity and power output. Unit also offers data rates which maximize handset battery life and provides high-performance indoor coverage. Optional external antenna and device management tools are available.
Drive Adapter supports CANopen over EtherCAT protocol.
ABB Low Voltage Drives
New Berlin, WI 53151
Feb 17, 2011
Combined with ACS355 and ACS850 drives, FECA-01 EtherCAT® Adapter offers solution for OEMs or system integrators focused on packaging, material handling, printing, rubber and plastics, and machine tool industries. Flexible plug-in fieldbus adapter provides connectivity to AC500 PLC and all other major programmable automation controllers and interfaces that support EtherCAT protocol. In addition to real-time control, solution is capable of extracting real-time data.
Bump Adapters allow SMT adaptation of fine pitch devices.
Aries Electronics, Inc.
Bristol, PA 19007-6810
Feb 11, 2011
Mounted to existing PCB via raised pads up to 0.010 in. on adapter bottom, Fine Pitch Bump Adapters feature pads on component side, designed to accept any device on any pitch 0.5 mm or greater, and route signals for packages including TSSOP, QFP, and other fine-pitch devices down to 0.40 mm. Boards are 0.032 in. thick FR4 or Rogers 370 HR with ½ oz copper traces on both sizes. Non-solder mask defined pads are finished with electroless nickel immersion gold.
Touchscreen Controllers offer optimized analog sensing.
San Jose, CA 95131
Feb 10, 2011
Supporting 2-12 in. touchscreens, maXTouch(TM) E Series is suited for smartphones, e-book readers, and tablets. Single-chip solutions feature capacitive touch engine, advanced 32-bit AVR® architecture, and 224-768 nodes. With optimized noise immunity, devices allow consumers to simultaneously use 2 mm passive conductive stylus while continuing to support multi-touch. Controllers support unlimited touches and deliver sensitivity needed for detection of fingernail or gloved user.
Bluetooth Module and USB Dongle support low power connectivity.
Bluegiga Technologies, Inc.
Hingham, MA 02043
Feb 09, 2011
Powered by 3 V coin cell batteries or two AAA batteries, Model BLE112 combines antenna, radio, Bluetooth stack, and flexible hardware interfaces to connect sensors, displays, or other peripherals. Low energy Bluetooth OEM module consumes 400 nA in lowest power sleep mode and can wake from sleep in a few hundred microseconds. Suited for PCs or other legacy devices with USB port that do not support Bluetooth 4.0, BLED112 Bluetooth USB Dongle can operate as virtual COM port or USB HID device.
Host Bus Adapters suit home NAS and media workstations.
HighPoint Technologies, Inc.
Ct. Milpitas, CA 95035
Feb 09, 2011
Powered by Marvell's SATA 6 Gbps 88SE9130 IC and HyperDuo technology, RocketHybrid HBA's combine performance of SSD with capacity of SATA HDD into single storage device known as HyperDuo virtual drive. RocketHybrid 1220 provides 2 internal SATA ports for standard PCs, while RocketHybrid 1222 features 2 eSATA ports for use with external disk enclosures. RocketHybrid controllers are true SATA 6 Gbps, PCI-Express 2.0 HBAs capable of supporting SATA and SSD storage devices.
Profibus DP Connectors eliminate manual shielding setup.
University City, MO 63105
Jan 31, 2011
Supplied in IP30-rated housings from 59 x 45 x 16.8 mm to 84.8 x 35.6 x 16.8 mm with test socket and active terminating resistor, Profibus DP connectors feature D-Sub and M12 interface with 35°, 90°, or 180° cable outlets. All versions support data rates to 12 Mbps, and quick-connection technology enables Profibus DP devices to securely connect with M12 Profibus cord sets without tools. Shielding geometry and die-cast zinc housing ensure error- and loss-free data transmission.
Multi-channel Repeaters have 20 m reach over 24-AWG cable.
National Semiconductor Corp.
Santa Clara, CA 95051-0695
Jan 28, 2011
Powered by SiGe BiCMOS process, PowerWise® repeaters provide 36 dB equalization gain, consume 55 or 65 mW/channel, and deliver 20 m reach over 24-AWG cable. They enable data bandwidth up to 10.3125 Gbps by performing receive equalization and transmit de-emphasis. The DS100BR410 has 4 unidirectional channels and supports 2.5 V single-supply voltage, while DS100BR210 (2 unidirectional channels) and DS100BR111 (1 bidirectional lane) support 3.3 and 2.5 V supplies.
Host and Hub Units extend USB connections up to 500 m.
Electro Standards Laboratories
Cranston, RI 02921 3403
Jan 19, 2011
Fiber-to-USB converter/extender set is comprised of host unit models 4162 and 4162-DIN and 4-port hub models 4169 and 4169-DIN. USB 2.0-compliant data is converted from standard PC host interface over fiber to remote 4-port powered hub. Offered in desktop and DIN rail mounted configurations, units offer plug-and-play operability with support for Windows®, Mac OS®, Linux®, and all USB device types and up to 480 Mbps data transfer rate.
Modbus Gateways integrate Ethernet cascading capability.
Advantech Automation Corp.
Cincinnati, OH 45240
Jan 18, 2011
Able to fulfill installation and Web browser configuration requirements for remote monitoring applications, EKI-1221D and EKI-1222D offer transparent connectivity between Modbus (ASCII, RTU) serial devices and Ethernet-based Modbus/TCP equipment. Both have built-in Ethernet switches for cascading/daisy-chain connectivity and flexible cabling. Designed to fulfill any master/slave relationship, gateways provide 921k baud speeds and support 16 TCP masters and 16 TCP slaves.
PMC Data Interface Card suits embedded and lab applications.
Data Device Corp. (DDC)
Bohemia, NY 11716-2482
Jan 14, 2011
Offering complete hardware and software solution, Model BU-65580MX combines 1 dual redundant MIL-STD-1553 channel and 1 Enhanced Bit Rate-1553 channel with 4-port hub on single card. Card is engineered for rugged environments and can be used in conduction cooled or air cooled systems. Model BU-65580MX is suited for weapons interfaces or stores management systems with limited space.
(Showing headlines 141 - 160) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57