Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Oct 03, 2011 Housed in 16 x 16 mm BGA package, BU-67301B Total-AceXtreme(TM) features dual redundant MIL-STD-1553 channel configurable in Bus Controller or Multi-Remote Terminal modes, each with concurrent Bus Monitor that captures data in IRIG-106 Chapter 10 format. Unit provides 8 digital discrete I/O, IRIG-B input, and MIL-STD-1760 support. Incorporating DMA engine and 2 Mb RAM, device offers 12.5 ns access time, suitable for mission computers, displays, and data recorders.

Tripp Lite    Chicago, IL 60609
Sep 22, 2011 Without requiring any external AC power source, Model B130-101-U runs VGA signal up to 500 ft over available Cat5e/Cat6 UTP cable. It supports up to 1920 x 1440 video resolution, has built-in VGA dongles, and offers equalization and gain control for sharp images. USB-powered, VGA over Cat5 Extender, used to facilitate and streamline video projection in various environments, suits digital signage applications, classroom or auditorium projectors, and more.

Aculab    Milton Keynes MK1 1PT  United Kingdom
Sep 20, 2011 Fitted with 8 E1/T1 trunks and 4 DSPs, 8 trunk Prosody X is designed to meet needs of developers building high-capacity communications platforms using PCIe form factor technology. Board supports up to 600 voice channel (TDM traffic) and 680 G.711 play/record session for VoIP traffic. In addition to onboard Gigabit Ethernet interface, features include CAS/SS7 signaling and trunk port activity LEDs. Lack of daughter boards promotes airflow and MTBF.

VIA Technologies, Inc.    Taipei 231  Taiwan
Sep 20, 2011 Supporting USB Battery Charging Spec 1.2 and transfer rates up to 5 Gbps, 4-port VIA Labs VL811 enables one downstream port of host computer or another hub to simultaneously interface with multiple USB devices. Controller is fully backwards-compatible with USB 2.0/1.1 hosts, hubs, and devices and incorporates Charging Downstream Port (CDP) feature that enables equal data transfer rate when charging BCS-compatible device as when charging from AC adapter. Adaptive equalization is standard.

Atmel Corporation    San Jose, CA 95131
Sep 20, 2011 Certified to IEC/EN 60730 Class B, AT42QT1481/1244/1245/2640 are QTouch® capacitive touch controllers for buttons, sliders, and wheels are ready to use with no MCU programming and support high button counts through 24, 48, or 64 acquisition channels. Adjacent Key Suppression(TM) mode provides precise discrimination between closely spaced keys, while Failure Mode Effect Analysis support ensures system is running properly. Conducted immunity and QMatrix(TM) technology are standard.

Jtag Technologies Inc    Stevensville, MD 21666
Sep 19, 2011 Based on QuadPod architecture and designed in MAC Panel Direct Access Kit (DAK) form factor, JT 2147/DAK signal conditioning module enables seamless connections from PXI DataBlaster to MAC-Panel Scout mass interconnect system. Functionality lets test system builders simplify wiring tasks while retaining optimal signal integrity. System features 4 independent JTAG Test Access Ports (TAPs), each programmable to operate through various voltage levels, and 16 user-assigned DIO channels.

Bell Howell Mailing Systems Div.    Durham, NC 27713
Sep 19, 2011 Using voice activation, touchscreen technology, and active display modules, JETVision Navigator(TM) enables machine operators to consolidate inserter and accessory interfaces into single controller. Active display module tracks operator's movement up and down machine and automatically repositions for optimal viewing. With voice commands, operators can send and receive machine status updates while working machine. Live chat technologies enable fast response to technical issues.

Harting KGaA      Germany
Sep 15, 2011 Offering data interface for Han-Modular® series connectors, Multi Contact Double Module is suited for applications in industry and transportation. Unit accepts up to 12 contacts and allows use of coaxial contacts as well as contacts for optical waveguides. In addition to multiple-channel data transmission, module allows simultaneous implementation of power contacts, which is useful in hybrid cabling configurations that integrate data transmission and power supply in one connector.

GL Communications Inc.    Gaithersburg, MD 20877
Sep 02, 2011 Capable of operating in Terminate, Bridge, and Monitor modes, T1 E1 Single or Dual Multiport Repeaters generate multiple identical outputs for each input. Single bantam version provides 10 identical outputs from one T1 E1 input, while single RJ45 version provides 12 identical outputs. Also available, dual version provides 4 outputs for each of 2 inputs. Units operate on 7-12 Vdc, draw up to 1,000 mA, and permit output drive for line lengths up to 655 ft.

Cirago International Ltd.    Sunnyvale, CA 94085
Aug 30, 2011 Model UDA2000 enables PC and Mac users to expand screen real estate to HDMI monitors with full 1080p resolution and carries built-in stereo audio. Plug-and-play product eliminates need to install additional internal video cards or run separate A/V connectors, enabling addition of up to 6 HDMI-compatible monitors to single PC or 4 on Mac. Product supports desktop display mirror, extended, multi-screen, and screen rotation modes and also includes HDMI to DVI adapter.

Network Technologies, Inc. (NTI)    Aurora, OH 44202
Aug 24, 2011 Providing local and remote KVM access to USB computer up to 300 ft over CAT5/6/7 cable, XTENDEX® ST-C6USBH-300 consists of local unit that connects to computer and remote unit that connects to keyboard, monitor, and mouse. With optional IR control, HDMI source can be controlled from remote HDTV using existing remote control for source device. Only one power supply is necessary to power both local and remote units, and units are connected via single CAT5/6/7 cable.

GL Communications Inc.    Gaithersburg, MD 20877
Aug 19, 2011 Equipped with 2 GB of DDR2 RAM, 1 GigE, and USB 2.0 interface, LightSpeed1000(TM) Dual OC-3/STM-1 and OC-12/STM-4 PCI-Express Card supports full duplex capture, real-time protocol analysis, and emulation of ATM, PoS, RAW, and Ethernet traffic over optical lines. Card provides hardware-based time stamping of cells/packets with 10 nsec resolution. Ability to capture to disk at full rate in both directions without errors on 2 cards permits detailed offline analysis.

Tripp Lite    Chicago, IL 60609
Aug 18, 2011 Featuring local transmitter and remote/repeater unit, VGA over Cat5 Extender/Repeater Kit allows signal to be extended initial 1,000 ft at 1,024 x 768. Remote/repeater units can then be connected, allowing signal to be regenerated additional 1,000 ft, with up to 5 monitors (1 local, 4 remote) located at different points in daisy-chain. Using Cat5e/6 cable for installation, kits are suited for digital signage applications in classrooms and retail environments.

Key Digital Systems, Inc    Mount Veron, NY 10553
Aug 17, 2011 Designed for commercial and residential A/V applications, Phantom Series(TM) KD-HDDA1X1 supports all SD, HD, and VESA resolutions up to 1080 p. Unit passes 3D and 4K signals, HD Audio, and Audio Return Channel information back from display, and can negotiate handshake with internal EDID library of 10 default HDMI handshakes. Extender offers full audio control for each output, including volume, multi-band equalizer, and lip sync control. Up to 3 extenders may be daisy-chained.

Harting KGaA      Germany
Aug 08, 2011 Suitable for use in switchboard cabinets and control terminals, har-port offers service interfaces for 1/10 Gigabit Ethernet as well as USB 2.0 and 3.0 Type A and makes control units and industrial computer interfaces accessible from outside. Compact design also makes unit suited for use as communication interface for conference tables or workstations. Assembly calls for one central fastening nut in standardized, circular, 22 mm panel cutout.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Aug 08, 2011 For optimized reliability, BU-65596F/M features enhanced Mini-ACE® core in ASIC design. Total-ACE® integrated terminals create rugged design suited for military applications. Along with DDC ASIC featuring over 62 million hr of in-service history, card offers up to 4 MIL-STD-1553 channels or up to 16 avionics discrete I/O. Solution is software-compatible with ACE and Enhanced Mini-ACE® and rated to VITA 47 Class V3 for rugged environments.

Future Technology Devices International Limited    Glasgow G41 1HH  United Kingdom
Aug 08, 2011 Respectively offering 200 mA max output at 3.3 and 5.0 V, C232HM-DDHSL-0 and C232HM-EDHSL-0 USB 2.0 Hi-Speed to Digital Level Multi-Protocol Synchronous Serial Engine (MPSSE) cables can be used to communicate with devices using synchronous serial interfaces. Supporting transfer rates to 30 Mbps, both 0.5 m long cables connect devices with 3.3 logic level interfaces to USB and consist of FT232H USB interface chip on compact circuit board encapsulated into USB connector end of cable.

L-Com, Inc.    North Andover, MA 01845
Jul 28, 2011 Offered in 24/28 AWG and 28/28 AWG configurations, USB bulk cable is optimized for flexibility as well as provision of full USB power transfer. Both configurations are USB 2.0-compliant and have double shields, braid and foil, to provide maximum protection against data-corrupting EMI/RFI. While 24/28 AWG configuration provides significant power transfer, 28/28 AWG version is primarily used for mini- and micro-USB connectors.

Magnetek    Menomonee Falls, WI 53051
Jul 27, 2011 Designed for Flex M receiver, Radio Drive Serial Interface Module allows users to communicate with IMPULSE drives though serial interface. Communication to any number of drives is achieved with 3 wires. When combined with Magnetek XLTX or MLTX2 transmitter, operators interfacing with Flex M receiver with RDSI module can monitor performance parameters such as drive status, torque reference, output frequency, voltage, current, and power, directly on transmitter's display unit.

Emerson Network Power    St. Louis, MO 63136
Jul 21, 2011 Featuring universal 100-240 Vac input for worldwide use, DCH5 Series generates regulated 5 Vdc output capable of delivering up to 1 A continuously. Adapters operate in constant voltage/constant current mode and are intended for powering or charging any USB peripheral device rated at 5 W or less such as smartphones, tablets, and digital cameras. Available in 4 models for US, Europe, UK, and Australia, adapters employ switch-mode power conversion technology and meet Energy Star Efficiency Level V.