COM-Ultra CPU module leverages Intel Atom N450 processor.
Measuring 84 x 55 mm, SOM-7562 is powered by IntelÃ-® Atom(TM) CPU N450 processor, with integrated onboard graphic and memory controller (GMCH) on one chip. Total power consumption is less than 5.5 W, and full range of I/O functions is standard: 10/100/1000 Mbps LAN, PCIe x1, SATA, USB 2.0, HD or AC97 Audio interface, SSD (optional), and GPIO. Suited for handheld or portable applications,...
Read More »
Eurotech Launches Aurora Au-5600, the Green Petascale Supercomputer Based on the Latest Intel-® Xeon-® 5600 Series Processor
Amaro (Italy), - Eurotech today launched Aurora Au-5600, the next-generation supercomputer for Green Petascale computing. This announcement follows Intel's introduction of Intel Xeon 5600 series processor and makes Eurotech one of the first market leaders to release an HPC platform based on it. This achievement is the last success in a series of joint launches made available by a strong...
Read More »
Fanless Embedded System features PCI expansion slot.
Equipped with 1.66 GHz Core 2 Duo CPU and 945GME chipset ensuring low heat dissipation and power consumption, ECK-161B also allows for one additional PCI card, up to 155 mm in length to be fitted. It has dual display ports, 1 GB of DDR2 SDRAM, dual Gigabit Ethernet ports, 6 x USB and 4 x serial ports, internal 2.5 in. HDD, and front-accessible CompactFlash card slot. Unit is powered from external...
Read More »
Computer-on-Module suits variety of gaming machines.
Supporting IntelÃ-® Core(TM) 2 Duo or CeleronÃ-® M CPU, Model ESM-GM45 features IntelÃ-® GM45 graphics processing technology, ICH9M chipset, FSB up to 1,066 MHz, and 2 sets of 2 GB DDR2 memory controllers. Interfaces include 4 SATA, 8 USB 2.0, 4 PCI, 4 PCIex1, and 1 PCIex16 expansion bus. Integrated graphics enable operation of dual monitors and allow dual channel 18/24-bit LVDS for...
Read More »
HPC Host Board uses Intel-® Xeon-® processor 5600.
System host board for Matrox Supersight e2 HPC platform features IntelÃ-® XeonÃ-® processor 5600 series that has 12 MB shared L3 cache and connects to DDR3L-SDRAM running at up to 1,333 MHz. Platform offers environment for data and task-level parallel processing through PCI ExpressÃ-® x16 2.0 switch fabric. Applications are developed with Matrox Imaging Library and Distributed MIL...
Read More »
All-in-One Barebones PC features fanless design.
Model X50V2 Barebone includes Intel Atom platform with D510 Dual Core Processor and NM10 Express Chipset. All-in-One-PC is passively cooled and is extremely quiet. It measures 3.6 cm wide and includes 4 GB of RAM as well as one parallel and 2 serial interfaces in back. Integrating webcam, stereo loudspeakers, WLAN, card reader, and stand, which can be turned into carrying handle, system also has...
Read More »
Computer-on-Module suits extended temperature applications.
Offered as Basic form factor COM Express(TM) Type 2 module, Kontron ETXexpressÃ-®-PC-XT uses only components that function under industrial temperature E2 range requirements from -40 to +85Ã-
Read More »
Industrial Computers without any rotating media or fans.
Featuring panel mounted depth of less than 3.2 in., Fan-less ePC Series includes 12.1, 15, 17, and 19 in. sizes - all available with 5-wire Analog Resistive touchscreens and NEMA sealed panel mount front panels. Each model is powered by 1.6 GHz IntelÃ-® Atom(TM) N270 CPU, and connectivity is fostered via 10/100/1000 Ethernet, RS-422/485, RS-232, USB 2.0, and PS/2 ports. Products also...
Read More »
ISA Half-Size Embedded Board is suited for factory automation.
Powered by 800 MHz DM&P Vortex86DX CPU, AR-B8170 computer board comes with onboard 256 MB DDRII-333 MHz memory and 64 MB video memory and supports 1,600 x 1,200 @ 32-bit VGA resolution to fulfill general 2D application demands. Its 7.29 x 4.81 in. footpint contains PC/104, 4 USB ports, 1 x RS-232, 1 x RS-232/422/485, 10/100M LAN, and 16-bit GPIO for connectivity as well as 1x SD, 1 x IDE, and 1 x...
Read More »Industrial Embedded Computers offer low power operation.
IntelÃ-® Atom(TM) processor based embedded IPCs ARK-1360, ARK-3202, and ARK-3360 facilitate designs where size-constraints and overheating are a factor, such as in-vehicle, retail, signage, surveillance, and factory control applications. ARK-1360 features single-board architecture with low power requirements and standard connectivity options, while ARK-3202 has more comprehensive I/O...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
