Parallel Port Connectors

Computer Hardware & Peripherals

Multi-Chip Solution performs for USB-to-RS232 interfacing.

July 18, 2013

USB-DUO bundles USB bridge controller ICs with RS232 transceiver IC, providing platform for creating USB-to-RS232 converter cabling systems supporting speeds up to 250 Kbps. While FT231XS provides USB-to-UART conversion operation, FT3243S transceiver provides digital-to-RS232 conversion – translating 3.3 V level UART signal from FT231XS to RS232 voltage levels. Product operates from -40 to +85°C and draws 9 mA when active or 135 µA when FT231XS X-Chip element is in suspend mode. Read More

Computer Hardware & Peripherals

USB-to-RS232 Adapter leverages semiconductor technology.

April 3, 2012

As USB-to-RS232 level full-handshake UART cable with male DB9 connector, 10 cm long Chipi-X supports USB 2.0 Full Speed operation with data transfer rates from 300 bps to 250 kbps at RS232 voltage levels. Both 512 byte receive and 512 byte transmit buffers utilize buffer smoothing technology, enabling sustained data throughput. FTDI FT231XS USB-to-UART interface IC handles USB protocol, and FT3243S transceiver IC deals with RS232 level voltage conversion. ESD protection is standard. Read More

Computer Hardware & Peripherals, Mechanical Power Transmission

Transcend Ushers into USB 3.0 Era

April 12, 2011

Offers a range of USB 3.0 products New Delhi: When the entire IT industry is moving towards Feed and speed, the human intensive devices including external HDD, Flash Drives, etc are adapting to the new standard of transfer technology i.e. USB 3.0. USB 3.0 offers much speedier protocol allowing data transfer speed of up to 5.0 Gbits/s, which is about ten times faster than the USB 2.0 protocol. ...Read More

Computer Hardware & Peripherals

Hi-Speed USB 2.0 Module can be customized by end-users.

February 9, 2010

QuickUSB is 2 x 1 in. circuit board that implements bus-powered high-speed USB 2.0 endpoint terminating in one 80-pin target interface connector. With companion QuickUSB Customizer software, end-users can tailor QuickUSB Module with user-defined My Product string descriptor, unique PID, and user-defined serial number. Included firmware, device drivers, and software work with Windows and Linux, and board supports range of I/O types. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals

USB to Serial Converter is packaged in DB9 form factor.

April 6, 2009

CE-USB USB2.0-to-RS232 adapter uses DB9 pcb pad pinout to allow updates to older serial products without any layout changes, and adds USB interface into existing serial products with no software or hardware redesign required. Device draws 35 mA from USB port, and drivers allow it to appear to operating system as additional COM port. It sends 8-bit asynchronous serial data at selectable speeds between 300-921.6 Kbps. All RS-232 signals, including handshakes, are available. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices

Configurable USB for Low Noise Remote Laser Diode Control

October 27, 2008

Intuitive Graphical Interface & Data Acquisition for Multiple Units via PC The FL593FL brings Wavelength's low noise FL500 laser diode driver under USB computer control. This full speed USB controller comes with a robust driver, a simple Windows(TM) control interface, and an easy-to-use development API for rapidly building custom applications. On-board nonvolatile memory holds operational...Read More

Computer Hardware & Peripherals

L-com Expands USB Adapter Offering

June 18, 2008

North Andover, MA - June 9th, 2008 - Adding to its already extensive offering of USB adapter solutions, L-com announced today that they will now carry USB adapters to convert Mini Din 6 as well as Mini-B 5 position cables. "By offering the widest selection of USB product choices, our customers can solve all their connectivity needs with one company" said Steve Smith, USB Product Manager. In...Read More

Computer Hardware & Peripherals

Integrated Circuit accesses 2 serial or parallel ports.

December 9, 2003

Model FT2232C dual-port USB-to-serial/parallel I/O IC is based on USB UART/FIFO FT232BM (USB-serial) and FT245BM (USB-parallel). Each of the dual ports configure independently in several different modes. Full modem hardware and software handshaking is offered in serial mode, with Automatic Transmit Enable control for RS485 applications. FTDI protocol allows galvanically isolated designs to communicate synchronously with FT2232C, using 2 dual optoisolators. Read More

Computer Hardware & Peripherals

USB to GPIB Hub Controller works with test instruments.

April 25, 2002

Model 1105 combines GPIB Controller and USB powered hub, making it possible to convert any desktop or portable PC with USB interface into full-function, IEEE 488.2 compatible Bus Controller. Supports Windows 98, ME, 2000, and XP and programming languages like Visual Basic and Visual C/C++. It has six powered USB ports for driving USB instruments or other USB devices. Unit can be rack mounted in 1U high space or used as stand-alone unit on bench.Read More

Computer Hardware & Peripherals, Electronic Components & Devices

USB Receptacle saves space on printed circuit boards.

April 17, 2002

Upright, right-angle, A-type USB connector reduces footprint by 25% compared to previous products. Connector allows high-speed data transfer between computers and peripherals such as printers, scanners, and video equipment. It has kinked grounding pins for PC retention, and indentations at inlet for mating retention. Height is 0.545 in. Insulator material is black or white, PBT thermoplastic and contacts are phosphor bronze with gold flash over nickel.Read More