Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 05, 2007 Accepting RJ45 inserts for Ethernet communication applications, Series 45 is designed for Category 5 and 5e cable. Positive lock coupling provides reliable connections, while protective cap can be used to cover receptacles when not in use. Featuring IP67 sealing, RoHS-compliant connector is suitable for industrial machinery, diagnostics equipment, printers, and other locations where ruggedization and environmental sealing are necessary.

Ethernet Direct
Newark, DE 19702
Nov 29, 2006 Single/Dual-Port Models BMS-136 and BMS-236 provide communication connection between RS-232/422/485 serial devices and Ethernet LAN/WAN. They can be configured as TCP Client/Sever or UDP, and can operate in Direct IP Mode, Virtual COM Mode, and Paired Mode. Operation modes provide transparent data channel between serial device and TCP/IP network. If connection failure occurs, Heart Beat feature tries to reconnect TCP data connection every 5 sec until communications is established.

Performance Technologies Inc.
Rochester, NY 14620
Nov 24, 2006 Quad T1/E1/J1 PCI Express (PCIe) telecom adapter, PCE385, includes onboard MPC8280 PowerQUICC II(TM) RISC communications processor. Access solution is enabled with NexusWare Core® integrated, Linux-based software that provides development, integration, and management environment used to build packet-based wireless and IP telephony systems. Adaptable platform can operate as fully programmable communications subsystem capable of intra-chassis communication using H.100 bus.

Saelig Co., Inc.
Pittsford, NY 14534
Nov 15, 2006 Measuring 28 in. long, eCOV-110 links serial devices to computer network without additional PC or replacing existing devices. It supports TCP/IP, UDP, HTTP, DHCP, TELNET, ICRM, and ARP protocols and provides up to 115 Kbaud RS-232 port compatible with 10/100 Mbps Ethernet hubs. Powered by external wall-mount supply or +5 V on pin 9 of RS-232 port, FCC/CE-marked unit comes with browser-based firmware configuration software and supports Windows, UNIX, and LINUX operating systems.

Moxa Tech USA Inc.
Brea, CA 92821
Oct 24, 2006 NPort 6000 series of device servers support DES/3DES/AES hardware encryption as well as standard SSHv2 and SSL encryption protocol. Servers feature built-in 64 KB port buffer that can be used to hold data when serial connection is severed. Buffer size can be increased by inserting SD card in expansion slot. Product is equipped with LCD panel allowing on-site configuration and can also be locked up to prevent tampering.

Multi-Tech Systems, Inc.
Mounds View, MN 55444
Oct 19, 2006 Used to connect serial devices to IP network, SocketEthernet IP® Model MT100SEM integrates complete, flexible TCP/IP protocol stack into single universal socket. Embedded serial-to-Ethernet device server measures 1 x 2.5 in. and includes 10/100BaseT Ethernet, LED driver outputs, AT command line interface, central site setup and control, and flash memory. It supports SMTP, POP3, DMS, ARP, FTP client, ICMP, IP, TCP, Telnet client, ping, and UDP.

SIXNET
Clifton Park, NY 12065 0767
Oct 13, 2006 Suited for use with IP67 Ethernet Switches, IP67 Industrial Ethernet Accessories include RJ45 Ethernet plug, RJ45 Bulkhead connector, power plug, and protective cap with tether. Units have positive lock for shock and vibration resistance and protect against dust, oil, and water. Strain relief prevents cables from breaking, while ¼ turn reverse-bayonet latching speeds installation time. Operating temperatures range from -40 to +85°C.

Belden
Richmond, IN 47375
Oct 09, 2006 Offering alternative to modular patch panels, 10GX IDC System optimizes 10G performance with headroom to handle 10GBase-T data networking and multimedia applications. 10GX Connecting Block combines MatriX and X-Bar technologies from 10GX Module with X-Pair technology, which allows twisted pair concept to be carried through connecting hardware, making connector transparent within cable run. System can be configured in large cross-connect fields with up to 2,300 x 2,300 ports in 20 ft wall space.

Saelig Co., Inc.
Pittsford, NY 14534
Aug 25, 2006 Featuring mounted RJ-45 connector, EG-SR-7150MJ enables any device with serial inputs and outputs to be Ethernet/Internet-enabled. Software setup facilitates creation of 10/100 Mbps Ethernet interface with max serial rate of 230 Kbps. Supporting 3 modes of operation (TCP server, TCP client, UDP), RoHS-compliant gateway enables IP Address to be manually assigned or automatically acquired from DHCP server. Serial commands can be hardware- or software-triggered.

Technobox, Inc.
Mount Laurel, NJ 08054
Aug 11, 2006 PCI Mezzanine Card (PMC), Quad 10/100-TX Mbps Ethernet Adapter with Front Panel I/O (Part No. 4435), supports 4 Ethernet connections over twisted pair media. Built around Intel 82551ER Ethernet controllers that provide integrated media access controller and physical layer, 4435 offers full-duplex operation at 10 Mbps or 100 Mbps. Connection to 32-bit, 66 MHz PCI bus is via PLX 6150B bridge, allowing each 82551ER to appear as independent controller on primary side of bridge.

Saelig Company
Fairport, NY 14450
Aug 11, 2006 Pb-free, hardwired drop-in network module, NM7010A-LF, adds Ethernet capabilities to microprocessor systems. It combines W3100A (TCP/IP hardwired chip), Ethernet PHY (RTL8201), MAG-JACK (RJ45 with transformer), and other glue logic. Up to 4 independent connections can be supported simultaneously, with dynamic buffer allocation for each channel, which enables sustained loop-back performance of 8 Mbps. Complete Ethernet-I2C interface comes with 16 KB data buffer embedded.

Technosoft S.A.
  Switzerland
Jul 27, 2006 Ethernet/RS-232 Adapter translates messages encapsulated in UDP packets into RS-232 serial data and vice-versa. When connected to Technosoft drive, 72 x 42 x 17 mm adapter converts the drive serial port into Ethernet interface. Adapter features 12-48 V power supply, DB9 male RS-232 connector, and RJ45 female Ethernet connector. Network status is displayed via 2 LEDs integrated into Ethernet port, with 2 other status LEDs on the adapter board.

Phihong USA
Fremont, CA 94539
Jun 14, 2006 Suited for applications involving wireless and satellite broadband, POE60U Series single port injector provides detection, disconnect, and voltage control fully compliant with IEEE 802.3af standards. This gigabit-compatible Power-over-Ethernet (PoE) adapter features diagnostic LEDs, broken wire detect, and single source 4-pair power current sharing. Compact power supply measures 6.54 x 3.15 x 1.75 in. and provides full OCP and OVP protection.

Allied Data Technologies
  Netherlands
Jun 05, 2006 Suited for small office and home office environments, Tornado 151 HomePlug Ethernet adapter turns any electric outlet into high-speed network connection by using available electricity grid. Product has max range of 200 m and 85 Mbps max data transfer rate for sharing of files, printers, and Internet connection. Equipped with 56 bit DES encryption, adapter ensures network is protected from unwanted users or hackers.

Netgear Inc.
Santa Clara, CA 96054
May 17, 2006 RangeMax(TM) Next Wireless Router with 10/100 Switch (WNR834B) and RangeMax Next Wireless Notebook Adapter (WN511B) utilize Broadcom's InteNsi-fi(TM) technology to deliver wireless connectivity. RangeMax Next Wireless Router Gigabit Edition incorporates 10/100/1000 Mbps switch to ensure optimal data throughput between wired and wireless clients. NETGEAR RangeMax Next wireless products deliver speeds up to 300 Mbps and are backwards-compatible with legacy 802.11b/g wireless products.

Precidia Technologies Inc.
Kanata, ON K2L 2P4  Canada
Apr 28, 2006 Dual-port Ether232Duo, available in 10 Base-T and 100 Base-T versions, provides users with RS232 to Ethernet adapter. Solution is offered with NetVu, which provides interface for streamlining deployment and ongoing management of networked equipment. Along with features such as remote configuration, downloads, and diagnostics, NetVu simplifies set-up and ongoing management of Ether232Duo.

Moxa Tech USA Inc.
Brea, CA 92821
Dec 02, 2005 Able to receive data from up to 8 computers for data sharing, ioLogik 4000 Ethernet Network Adapter reads sensor data, on/off status, and control on/off status of devices remotely over Ethernet network. It can connect up to 32 I/O modules, which is equivalent to 512 DI/O points or 128 analog input channels. Over 40 types of I/O modules are available, including 24 Vdc, 48 Vdc, 110 Vac, and 230 Vac DI/O modules, and 0-20 mA, 4-20 mA, and 0-10 V analog I/O modules.

AR Worldwide
Souderton, PA 18964
Apr 27, 2005 Using serial tunneling method, IA232ET interface encapsulates serial data into packets and transports it over Ethernet. Use of product enables AR Worldwide products to be remotely monitored, managed, and controlled over 10Base-T and 100Base-TX networks, eliminating limited distance, point-to-point connections.

Molex Inc.
Lisle, IL 60532-1682
Apr 27, 2005 Featuring integrated magnetics, HyperJack™ 1000 Gigabit Power over Ethernet® module provides PoE management functions embedded within RJ-45 connector. Fully shielded unit is available in multi-port configurations, including 2 x 4 and 2 x 6. It contains up to three TI quad-port TPS2384 power management ICs, which support operation over temperature range of -40 to +125°C. Applications range from enterprise systems with up to 128 ports to low-port count hub Ethernet switches.

Phihong USA
Fremont, CA 94539
Apr 06, 2005 Offering total output power of 15.4 W, switching power supply, Model PSA16U features ac input voltage of 90–264 Vac with voltage range from 100–240 Vac and ac input frequency from 47–63 Hz. Maximum output load current is 0.35 A. Three LEDs indicating power, connection, and faults facilitate installation and set-up. Power-over-Ethernet allows power and data to be carried over Ethernet cable. Applications include wireless access points, security cameras, and IP telephones.