National Instruments Corp.
Austin, TX 78759-3504
Aug 20, 2008 Offering 2 Gigabit Ethernet ports with up to 1,000 Mb/s transfer speeds per port, NI 8234 features x4 PCI Express interconnect, providing up to 1 Gb/s bandwidth for real-time data streaming from single PXI Express slot. Compatible with GigE Vision camera interface for machine vision applications, NI 8234 delivers high-speed image transmission for standard cabling at distances up to 100 m. Module is also suited for LAN and LXI instrument control applications using dedicated private networks.

Beckhoff Automation LLC
Minneapolis, MN 55337
Aug 11, 2008 Model EL3602 EtherCAT® I/O terminal samples measurement readings with 24-bit resolution and accuracy within ±0.01% at 25°C. Measuring signals directly in standard I/O system, analog 2-channel input terminal handles signals ranging between -10 and +10 V. Device is capable of executing high-precision measuring tasks on machine or for test rig automation.

Motorola, Inc.
Schaumburg, IL 60196 4041
Jul 29, 2008 Providing carrier class connectivity, PTP 300 Series performs in challenging geographical and extreme environmental conditions. Units cover line-of-sight distance up to 155 miles, with near-line-of-sight and non-line-of-sight ranges up to 25 miles and 6 miles respectively. Operating in 5.4 and 5.8 GHz bands at data rates up to 25 Mbps, bridges support multimedia, distance learning and telemedicine, disaster recovery and events, WAN backhaul, and fixed and wireless link backup.

Micrel Inc.
San Jose, CA 95131
Jul 29, 2008 Integrating Fast Ethernet MAC/PHY with 8/16/32-bit and SPI host interfaces, KSZ8851 single-port embedded controller chip is pin-compatible with KSZ8841 and KSZ8842 product families. Unit has 18 Kb of internal buffer memory shared between RXQ and TXQ. Buffer memory on receive queue is 12 Kb, while buffer memory for transmit queue is 6 Kb. Offering performance at 80 Mbps or higher, it has energy detect mode, programmable I/O options of 3.3/2.5/1.8 V, and temperature range of -40 to +85°C.

Saelig Co., Inc.
Fairport, NY 14450
Jul 28, 2008 Designed for high-speed embedded systems, Model W5300 10/100 Ethernet controller IC offers stable speeds up to 50 Mbps and supports 8 independent, simultaneous sockets with 16- or 8-bit data bus. It supports hybrid TCP/IP stacks, as well as Ethernet protocols with internal hardware including TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE. Using internal 150 MHz core, IC dynamically allocates its internal 128 Kb Tx/Rx memory according to socket throughput.

ABB Inc.
Auburn Hills, MI 48326
Jun 12, 2008 By facilitating and accelerating connectivity of ABB drives to PROFINET IO or Modbus/TCP network, RETA-02 Ethernet Adapter makes it possible to send control commands as well as motor speed/torque reference to drive. It also enables sending of process actual value or process reference to drive's PID controller and lets users read status information and actual values from drive, change drive parameter values, and reset drive fault. Adapter snaps into drive in seconds.

HMS Industrial Networks, Inc.
Chicago, IL 60607
Jun 11, 2008 Offered in 19 versions, Anybus X-gateways allow EtherCAT connected devices to communicate with other fieldbus or industrial Ethernet networks, and vice versa. Compact devices feature standard DIN rail mounting and 24 V industrial power supply. On EtherCAT side, they function as slave, while on secondary network they work as master, slave, or server, depending on selected network combination. Devices are CE-marked and certified for UL, ATEX, and Class 1/Div 2 hazardous locations.

Advantech Automation Corp.
Cincinnati, OH 45240
May 23, 2008 With peer-to-peer functionality provided in firmware, ADAM-6000 distributed Ethernet I/O modules can actively update input channel status to specific output channels. Data will transfer automatically, with no extra controller or programming needed. GCL software utility, also included, adds control logic between input and output, and can create equivalent instructions to simple ladder logic instructions on PLC's. It also supports flexible cascade function locally or over Ethernet network.

Phihong USA
Fremont, CA 94539
May 14, 2008 Delivering 33.6 W of power on single Ethernet port, Model POE36U provides fully compliant detection, disconnect, and voltage control. Adapter is Gigabit-compatible and incorporates diagnostic LEDs as well as overvoltage, over-current, and short-circuit protection. Featuring layer 1, 2 finger classification, device is suited for IP telephones, wireless network access points, Bluetooth access points, access controls, security cameras, IP print servers, and biometric sensors.

Motorola, Inc.
Schaumburg, IL 60196 4041
May 01, 2008 Operating in 5.4 and 5.8 GHz bands at up to 105 Mbps, PTP 500 Series delivers midrange throughput for non-line-of-sight connectivity. Units include MIMO, i-OFDM, advanced spectrum management, and adaptive modulation features. Suited for deployments that require secure backhaul or broadband connectivity, bridges provide up to 99.999% availability in virtually any environment, including NLOS, long-distance line-of-sight, over water or open terrain, and in extreme weather.

Netgear Inc.
Santa Clara, CA 96054
May 01, 2008 ProSafe 802.11n Dual Band Wireless Access Point (WNDAP330) supports devices based on 5 GHz 802.11a/n or 2.4 GHz 802.11b/g/n technologies. SNMP-manageable solution secures wireless network and incorporates 802.3af PoE support. Suited for point-to-point and point-to-multipoint bridging with Wireless Distribution System, product incorporates 10/100/1000 Gigabit Ethernet port with Auto Uplink(TM), console port for local configuration and monitoring, and 3 detachable antennas.

Broadcom Corp.
Irvine, CA 92618
May 01, 2008 Designed on 65 nm CMOS process, BCM8073 dual serial 10GBASE-KR-to-XAUI backplane PHY enables 10, 2.5, and 1 Gigabit Ethernet on existing backplane infrastructures. It extends life of existing systems that use 4 lanes to carry 10 Gbps (XAUI) data rates by providing 4X bandwidth improvement per channel. Featuring DSP-based architecture with fully adaptive datapath, 1.2 W solution can drive over 40 in. of FR-4 with 3 backplane connectors.

ICS Electronics Corp.
Pleasanton, CA 94588
Apr 29, 2008 Model 8055 adapts GPIB instruments to Ethernet-based test systems, enabling access to these newly made VXI-11.3 instruments from any computer with NIC interface or over TCP/IP network. Used as external box or mounted inside instrument, VXI-11.3 compliant server enables instruments to be controlled by programs running in Windows and UNIX/LINUX OS. It supports reverse channel Service Request messages, as well as supporting multiple clients as part of its standard firmware.

Chelsio Communications
Sunnyvale, CA 94085
Apr 11, 2008 T3 Unified Wire Adapters are 10 GbE units that utilize TCP/IP offload engine (TOE) technology supporting Microsoft® TCP Chimney architecture, which allows Windows® OS to offload network TCP processing from CPU to network controller. They also free up memory bandwidth for processing of applications. Product addresses performance acceleration requirements of CIFS, iSCSI, and general networking applications.

Motorola, Inc.
Schaumburg, IL 60196 4041
Apr 07, 2008 Model PTP 45600 Integrated and Connectorized Wireless Ethernet Bridges provide U.S. Federal Government agencies and NATO license holders in 4.5 GHz band with bandwidth needed to support communications in difficult RF environments. They support building-to-building connectivity, and offer selectable channel widths and varying data rates up to 300 Mbps. Electronic components are encased in outdoor enclosure that can withstand temperatures from -40 to +140°F and winds up to 202 mph.

TURCK, Inc.
Plymouth, MN 55441
Mar 31, 2008 BL67 Ethernet gateway, available for DeviceNet(TM), PROFIBUS®-DP, CANopen, Ethernet/IP(TM), and Modbus TCP/IP, consists of gateway, base modules, and electronic modules. I/O modules are configured independently of fieldbus protocol, and up to 32 modules may be connected to gateway, delivering up to 512 digital I/O points or 128 analog channels on single system. IP67-rated for field installations, it uses I/Oassistant software and is compatible with BL ident RFID system.

FCI Electronics
Etters, PA 17319 9769
Mar 31, 2008 Available with or without LEDs, Magnetic Jacks offer current ratings of 1.5 A and voltage ratings of 150 Vac. RJ45 connectors are most commonly used for 10/100 and 1000Base-T Ethernet applications. Additional uses include networking routers, switching hubs, set-top boxes, printers, and networking adapters/LAN cards.

Galil Motion Control
Rocklin, CA 95746
Mar 26, 2008 Housed in 3.88 x 4.26 x 1.30 in. metal enclosure with D-type connectors, Model RIO-47120 contains 8 analog inputs, 8 analog outputs, 16 optically isolated inputs, 8 high-power isolated outputs rated at 500 mA each, and 8 isolated outputs rated at 25 mA each. Voltage range for analog inputs and outputs is user-programmable at 0-5, 0-10, ±5, and ±10 V. Powered by PoE or external 18-36 Vdc supply, controller includes Ethernet 10/100Base-T port and RS232 port up to 115 Kbaud.

SIXNET
Clifton Park, NY 12065 0767
Mar 26, 2008 With web-based I/O configuration and monitoring, self-calibrating analog I/O, and OEM customizable components/labeling, EtherTRAK-2 features RS483 and USB Ethernet ports with MAC and IP addresses, allowing 2 module connections to independent networks. ISO9001, CUL, UL DNV, CE, FCC, and RoHS rated module has operating temperature range of -40 to 75°C. Compact enclosure snap-locks into wiring base, and hot-swap capability minimizes downtime.

R. Stahl, Inc
Houston, TX 77054
Mar 24, 2008 Able to communicate via Modbus TCP, IS1 remote I/O system for industrial Ethernet environments includes DTM that allows users to configure, parameterize, and diagnose systems by means of standard DTM software tools. It consists of communication unit and power module, both which are hot swappable. In case of line breakdown, system can switch to alternate line within 200 ms and is designed for use in zone 1/division 1.