Harris Stratex Networks, inc.
Morrisville, NC 27560
Oct 10, 2008 WiMAX ecosystem targets Tier 2 and 3 service providers planning or building-out networks for residential and business users. It includes 7000 Series(TM) WiMAX platform that supports 450/700 MHz as well as IEEE 802.16e-2005 WiMAX standards for mobile and fixed subscriber applications. Eclipse(TM) platform for wireless IP backhaul and ASN and CSN core network services elements is also included. Range of services, including complete managed network service, are available through system.

ADVA Optical Networking
Ramsey, NJ 07446
Oct 09, 2008 Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as optical amplifiers and active Ethernet technology that enable reach extension and traffic aggregation.

Bytemobile, Inc.
Mountain View, CA 94043
Oct 07, 2008 Available with Unison(TM) Mobile Internet Platform, WebGate(TM) Service provides single service control point within network for all wireless data traffic. This enables network operators to deliver new data services and applications to their customers while controlling data flow through intelligent service selection. Able to manage all traffic types, mobile internet gateway is positioned in core data path of network to analyze and process traffic at application level.

Alcatel-Lucent
Paris 75008  France
Oct 02, 2008 By providing set of options for virtual private networking and Ethernet connectivity, 7342 ISAM Fiber-to-the-User System can connect with metro Ethernet networks. Optical monitoring feature enables critical parameters to be measured and recorded for analysis over time. IEEE 1588 timing feature provides necessary synchronization for remote placement of gigabit passive optical network systems in outside plant and connectivity of DS1 services.

Napatech Inc.
Andover, MA 01810
Sep 29, 2008 With NEWARK release, NT4 quad-port, 1 Gbps PCIe adapter family offers hardware support for NTPORT4 four-port, 1 Gbps expansion modules and can act as 8-port adapter. DMA-based statistics module offloads data collection from host CPU, and full RMON standard, extended with jumbo frame counters on per-port basis, is available for captured and discarded frames. Solution delivers good/bad statistics per filter (64) and per host buffer (32), presented as snapshots for analysis.

Sanyo Fisher (USA) Corp.
Chatsworth, CA 91311
Sep 25, 2008 Including 7 million Points of Interest with advanced search, SANYO Easy Street NVM-4370 features true text-to-speech, turn and next turn indicators with color coding, 3D junction view to indicate correct lane to take when approaching multiple freeway interchange, railroad indicator with voice alert, and final destination indicator. Able to repeat last voice command by touching onscreen turn indicator, Bluetooth enabled device also offers speed sensitive voice command.

KORENIX Technologies
Taipei 231  Taiwan
Sep 23, 2008 Providing digital input and event counter for input mode, JetCon 6330 I/O to Ethernet converter has smart peer to peer function which supports users to configure point to point, point to multiple points, or multiple to one point operation. Available in IP31 protected aluminum case, it features Windows Utility and web interface for configuration, built-in watchdog that protects against system failure, and safe mode operation for network link lost.

Beckhoff Automation LLC
Minneapolis, MN 55337
Sep 22, 2008 Featuring glass fiber technology, EK1501 EtherCAT® Coupler and EK1521 junction terminal makes long-distance networking up to 1.24 miles possible (100BASE-FX). Fiber-optic coupler (EK1501) connects EtherCAT to any number of EtherCAT I/O Terminals, and additional fiber-optic module can be optionally connected via second port. Featuring fiber-optic interface, EtherCAT Terminal enables conversion of EtherCAT protocol to multimode glass fiber technology within terminal line.

KORENIX Technologies
Taipei 231  Taiwan
Aug 27, 2008 Incorporating 16-bit, 100 MHz RISC-based processor, watchdog timer, and real time clock, Jet I/O 6500 Series DIN rail-mounted modules enable users to monitor and control I/O devices and integrate them with SCADA/HMI software applications. Equipped with one RJ-45 Ethernet port, multiple analog/digital I/O channels, as well as temperature measurement connectors, units support Modbus/TCP protocol, measure 120 x 55 x 75 mm, and operate in temperatures from -20 to +70°C.

Acromag, Inc.
Wixom, MI 48393 7037
Aug 25, 2008 Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2161 and ES2162 accept 32 differential DC current or voltage inputs, respectively, and interface signals to Ethernet devices/controllers with Modbus TCP/IP or UDP/IP protocol. Also, ES2162 units accept signals from 8B signal conditioning module racks through 2 DB25 ports to monitor temperature, frequency, and load cell sensors. Scanning updates all channels in less than 5 msec, and embedded Web page eliminates programming.

AnyDATA Corp
Irvine, CA 92612
Aug 22, 2008 With A-GPS cellular technology, AnyTrack GPS-120 silently monitors and reports location of high-value, heavy equipment, such as skid steer loaders, backhoe loaders, and tractors anywhere in the U.S. without need of any software. It also enables business owners to place Geofence GPS-enabled perimeter around tracked equipment to prevent unauthorized use or theft by issuing alert via mobile text message or email. Automatic tracking provides real-time location data to aid in recovery.

Beckhoff Automation LLC
Minneapolis, MN 55337
Aug 11, 2008 Model EL3602 EtherCAT® I/O terminal samples measurement readings with 24-bit resolution and accuracy within ±0.01% at 25°C. Measuring signals directly in standard I/O system, analog 2-channel input terminal handles signals ranging between -10 and +10 V. Device is capable of executing high-precision measuring tasks on machine or for test rig automation.

MERU Networks
Sunnyvale, CA 94087
Aug 08, 2008 RF Barrier(TM) uses IEEE 802.11 WLAN technology to block RF signals from corporate network as they exit building, without disrupting internal operation, to limit attackers' outside data eavesdropping and offline analysis capabilities. Delivering proactive wireless perimeter protection for legacy and modern equipment, solution also provides physical wireless security in remote branch offices where no IT personnel are present to detect/stop attacks from outside site's physical boundaries.

Ruckus Wireless
Mountain View, CA 94043
Aug 08, 2008 MediaFlex(TM) 7000 series lets operators distribute multiple streams of HD IPTV content throughout subscriber's home. By integrating 802.11n with beam steering technology, product controls and coordinates forms and directions of multiple signal streams in real-time to maximize 802.11n spatial multiplexing while navigating around interference and physical obstructions. Remote management capabilities give broadband operators complete visibility into subscribers' home networks.

Multenet Technologies (Pty) Ltd
Stellenbosch   South Africa
Aug 04, 2008 Supporting HSDPA, HSUPA, GSM GPRS, PPPoE, DSL, and VRRP for high-bandwidth, mission-critical data communications applications, Multenet Broadband Router features dual-SIM network failover that allows for automatic switch-over to backup cellular service provider if primary service fails. It offers Network Address Translation, VPN via PPTP or L2TP for remote access to corporate networks, network firewall for hardened security, and DHCP server to aid network configuration.

Freewave Technologies, Inc.
Boulder, CO 80301
Aug 01, 2008 Measuring 101 x 51 x 13 mm and weighing 42 g, MM2 900 MHz radio with Ethernet features 115.2 Kbps to 1.23 Mbps speed range. Tested for RF performance from -40 to +85°C, wireless radio has line-of-sight range to 60 miles at standard data rates and 30 miles at high-speed data rates. It offers 128-bit AES encryption and RISC-based signal demodulation with matched filter, and supports TCP, industrial grade wireless security, and serial communications.

Micrel Inc.
San Jose, CA 95131
Jul 29, 2008 Integrating Fast Ethernet MAC/PHY with 8/16/32-bit and SPI host interfaces, KSZ8851 single-port embedded controller chip is pin-compatible with KSZ8841 and KSZ8842 product families. Unit has 18 Kb of internal buffer memory shared between RXQ and TXQ. Buffer memory on receive queue is 12 Kb, while buffer memory for transmit queue is 6 Kb. Offering performance at 80 Mbps or higher, it has energy detect mode, programmable I/O options of 3.3/2.5/1.8 V, and temperature range of -40 to +85°C.

Saelig Co., Inc.
Fairport, NY 14450
Jul 28, 2008 Designed for high-speed embedded systems, Model W5300 10/100 Ethernet controller IC offers stable speeds up to 50 Mbps and supports 8 independent, simultaneous sockets with 16- or 8-bit data bus. It supports hybrid TCP/IP stacks, as well as Ethernet protocols with internal hardware including TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE. Using internal 150 MHz core, IC dynamically allocates its internal 128 Kb Tx/Rx memory according to socket throughput.

Test & Measurement Systems Inc.
Loveland, CO 80537
Jul 14, 2008 TAMS L488 is compact miniature adapter that connects directly to any test instrument's GPIB port and allows it to be controlled over LAN using single Ethernet cable, eliminating need for GPIB cables or LAN to GPIB gateway. VXI-11 compatible unit has sustained data throughput of more than 1 MB/sec, and is supported on Red Hat Enterprise Linux, Windows, and HP-UX. Meeting IEEE PoE standard 802.3af, it uses single CAT5 cable to provide both data and power to device.

NAPCO Security Group
Amityville, NY 11701
Jul 10, 2008 Supporting all alarm panel brands using Contact ID and 4/2 formats, StarLink Full Data (SL-1FD-T) comes with telephone line connection and monitoring for primary or backup alarm reporting. Compact, rugged aluminum enclosure accepts standard ½ in. EMT for wiring protection and standard 3/8 in. recessed magnetic contact for tamper-proof protection. With less than 20 mA standby current, unit can be powered from any existing alarm control panel or battery.