Ethernet Direct
Newark, DE 19702
Aug 29, 2008 Available in DIN rail mounted rugged housing and conformal coated protected circuitry with extended temperature tolerance of -40°C to 80°C, Iguana Series IUE-500EC Industrial 5-port Unmanaged Ethernet Switch supports IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing RJ45 ports. Unit supports 10-30 Vdc power input and 3,000 Vdc surge (EFT) protection for power line. It offers Ethernet isolation of 1,500 Vrms and frame ground for EMS protection.

KORENIX Technologies
Taipei 231  Taiwan
Aug 25, 2008 Equipped with 24 10/100 base-TX ports plus 4 gigabit RJ45/MINI GBIC combo ports, JetNet 5228G 19 in. 24+4G rackmount managed ethernet switch is designed for building, control room, and telecom applications where high-port density and performance are needed. It supports 802.1s multiple spanning tree protocol, security by 802.1x, and radius and layer 2/4 access control list. Unit features link layer discovery protocol, SNMPv3, SSL, SSH management, 100-240 Vac power input, and fanless design.

Ethernet Direct
Newark, DE 19702
Aug 12, 2008 Model WUE-567E Industrial IP-67 Ethernet switch is suited for use in harsh or outdoor applications with -40 to 80°C environmental conditions. Resistant to dust, dirt, humidity, water, vibration, and shock, it features five 10/100TX RJ45 ports that support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing. With 1.4 Gbps bandwidth, unit can simultaneously handle full wire speed communication on each port, and supports 10-30 Vdc isolated power input.

Pickering Interfaces
Wobum, MA 01801
Aug 01, 2008 With POTS, USB 2.0, AFDX, and Gigabit Ethernet capability, Model 40-736 can switch communications signals carried on 100 W differential pair cables. It is configured as 8:1 or 16:1 multiplexer for GbE and 100BaseT/AFDX applications, respectively. I/O signals are carried on 78 way D Type connector, while interface adaptor card converts signals to 8:1 Ethernet MUX on RJ45 connectors for direct connection to Ethernet cable.

WAGO Corp.
Germantown, WI 53022
Jul 24, 2008 Equipped with rugged housing, 852 Series features operating temperature of 0-60°C, as well as vibration and shock resistance. Models 852-101, -102 and -103 include DIP switch for alarm functions; non-blocking, store-and-forward switching; auto-negotiation on all 10/100BaseTX ports; and auto-MDI/MDIX on all 10/100BaseTX ports. Top-tier Model 852-104 adds Web-based/SNMP management, Xpress Ring, VLAN (802.1q) VID, IGMP snooping, port trunking, and SNMP v1/v2 with RMON.

WAGO Corp.
Germantown, WI 53022
Jul 23, 2008 Ranging from simple Ethernet switches to configurable multifunction Ethernet communication switches, 852 Series offers scalable solutions for network infrastructures. Products have operating temperature of 0 to +60°C, are resistant to shock and vibration, and incorporate function monitoring as well as redundant voltage supplies from 9-48 V. These 5-, 7-, and 8-port, 100BASE-TX industrial switches come with RJ-45 connector for gas-tight, pullout- and vibration-resistant connections.

Beckhoff Automation LLC
Minneapolis, MN 55337
Jul 09, 2008 Featuring direct connection to Beckhoff I/O terminals, models BC9120, BC9020, and BC9050 can be operated as stand-alone PLCs or decentralized intelligence in Ethernet network. Each has implemented Modbus TCP, ADS/TCP, ADS/UDP, BootP, DHCP, SNTP, and SMTP protocols. While BC9050 extends Beckhoff Bus Terminal system in space-saving housing, BC9020 and BC9120 offer additional program and data memory. Also, BC9120 has 2 Ethernet ports that act as 2-channel switch.

Westermo
Stora Sundby   Sweden
Jul 07, 2008 Featuring built-in 4-port Ethernet switch, Wolverine Models DDW-221 and DDW-222 offer transfer rates up to 5.7 Mbit/s and operating distance of 10 km. Redundant protocol can be used on SHDSL interface or on built-in Ethernet switch. It uses FRNT technology to re-configure network in event of any link or hardware failure. Model DDW-222 includes RS-232 serial adapter and 10-port Virtual Com port re-direct software, which re-directs Com port to IP address.

Harting KGaA
  Germany
Jun 23, 2008 Rugged 5-port HARTING eCon 2050-AA switch stores up to 4,000 MAC addresses and offers support for auto-crossing, auto-negotiation, and auto-polarity. All 5 ports are designed for Gigabit Ethernet and jumbo frames up to 9,728 bytes. Enclosed in metal case to make optimum use of available space, switch features LED indicators for each port to facilitate network diagnosis, and comes with integral DIN rail mounting hardware.

Micrel Inc.
San Jose, CA 95131
Jun 10, 2008 With Model KSZ8995FQ, users can build loop applications by using fiber ports 3 and 4 to cascade together a ring, while utilizing MII interface on port 5 to CPU/Host. Switch contains five 10/100 transceivers with mixed-signal technology, 5 MAC units, high-speed non-blocking switch fabric, dedicated address look-up engine, and on-chip frame buffer memory. Housed in 128-pin PQFP package, switch is suited for industrial Ethernet, managed media converters, and FTTx CPE.

Broadcom Corp.
Irvine, CA 92618
Jun 03, 2008 StrataXGS® 4 series of 65 nm switches suits OEMs designing modular, stackable, and fixed form factor equipment for service providers, data centers, and enterprise markets. Model BCM56624 is 48-port GbE + 4-port 10GbE solution with IPv4 and IPv6 routing, metro encapsulation protocols, security, and QoS features. Featuring HiGig switch fabric, BCM56720 provides one half terabit of packet switching capacity on one chip, scalable to multi-terabits of capacity on one backplane.

Harting KGaA
  Germany
Jun 02, 2008 Enabling administration of entire network, mCon 1000 Series of industrial switches comply with DIN EN 61850-3 and are approved for use in power distribution and wind energy communication networks. Up to 10 Ethernet nodes can be attached via twisted pair/fiber optic cable to Fast Ethernet and Gigabit Ethernet switches. Protection class, temperature range, and mechanical stability ensure dependability in demanding industrial environments.

Tundra Semiconductor Corp.
Kanata, ON K2K2M5  Canada
Jun 02, 2008 Consuming 120-200 mW per port, Tsi572(TM) Serial RapidIO® Switch allows System OEMs to use RapidIO x1 ports for processor aggregation on AMCs and RapidIO x4 port for interface to AMC.4 backplane. Solution offers scalability, hardware multicast, and low latency (110 ns, cut through) functionality for wireless, wireline, and imaging/video applications. Compliant with RapidIO 1.3 specification, this 21 x 21 RapidIO Switch offers 30 Gbps of non-blocking full duplex bandwidth.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 02, 2008 With rack dimensions of 19 x 8.75 x 13.0 in., Model 9741 high-density RJ45 A/B, 1000Base-T, Cat5e switch allows user to select 8, 16, 24, 32, or 40 channels to be populated. It features backup switching capability for data network, and accommodates up to 40 channels in 8.75 in. of panel height. A, B, and Common connectors are on rear panel, while two-position rotary switches are on front panel. All 8 pins are switched which allows for compatibility with all RJ-45 interfaces.

Harting KGaA
  Germany
May 22, 2008 Offering management functionalities that enable consistent network administration where availability is prioritized, mCon 1000 managed Ethernet switches are suited for use as industrial network components active on Automation IT communication platforms. They are certified to DIN EN 61850-3 and support 10 Mbps Ethernet, 100 Mbps Fast Ethernet, and 1,000 Mbps Gigabit Ethernet. Up to 11 Ethernet stations can be connected with shielded twisted-pair cable and fiber optic cable.

Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 Supplied in 17 x 17 mm CSBGA package, DS33X162 enables delivery of new Carrier Ethernet services over existing PDH telecom infrastructure. It allows Ethernet transport from one GbE or two 10/100 Ethernet interfaces and supports up to 16 T1/E1 links or 8 DS3 links with 400+ Mbps throughput. In addition to Ethernet frame encapsulation in GFP-F, HDLC, or X.86, solution performs ingress policing, Ethernet service profiling, priority-based forwarding, VLAN tagging, and QoS scheduling.

Advantech Automation Corp.
Cincinnati, OH 45240
May 13, 2008 Operating from -40 to 75°C, EKI-7559MI/EKI-7559SI and EKI-7554MI are integrated with X-Ring technology, which supports single, dual, and quad ring architectures and enables near-instant redundancy with recovery time less than 10 ms. Model EKI-7554MI has 4 + 2 ports, while Models EKI-7559MI/EKI-7559SI feature 8 + 2 ports, providing uplink that can transmit data up to 30 km at 100 Mbps. Additional features include IP security, VLAN, Port Mirroring, IGMP Snooping, Port Trunking, and email warnings.

Cisco Systems, Inc.
San Jose, CA 95134
May 08, 2008 Cisco Nexus 5000 Series of data center-class switches deliver line-rate, low-latency, 10 GbE switching, as well as standards-based, I/O consolidation via support for Fibre Channel over Ethernet (FCoE), Data Center Ethernet, and virtualization technologies. It consolidates LAN, Fibre Channel and iSCSI-based SANs, and server cluster traffic onto Ethernet-based unified fabric. Fixed-configuration 40-port switch also provides virtual machine (VM) optimized services.

Juniper Networks, Inc.
Sunnyvale, CA 94089
May 05, 2008 EX 3200 series switches are fixed-configuration Ethernet platforms that include plug-and-play 10/100/1000BASE-T connectivity. They feature field-replaceable power supply and fan tray. Incorporating 24-port fiber switch offering 100/1000BASE-X support, EX 4200 series switches with Virtual Chassis technology include hot-swappable internal power supplies and replaceable multiblower fan trays. Both switches have full or partial PoE and optional GbE and 10 GbE uplink modules.

Marvell Semiconductor Inc.
Santa Clara, CA 95054
May 01, 2008 Converged switching SoC products, Prestera® 98DX2100 and 98DX4100, are powered by Marvell® CarrierSpan(TM) technology and tailored for Ethernet-centric broadband access and intelligent services-enabled Enterprise Edge markets. They combine embedded service processor with low-power design to create scalable, unified switching architecture. By including sets of programmable interfaces, products target various forms of high-speed broadband access (PON, VDSL, native Ethernet).