Atlona Technologies
San Jose, CA 95131
Sep 30, 2009 Mac tested and approved, AT-DP200 converts DVI input and outputs Mini DisplayPort signal while passing along all EDID and HDCP information. This enables computer to scale to optimal resolution offered by display, including 1,920 x 1,200 or 1,280 x 800. Suited for Apple computers acquired before 2009, conversion box is compatible with Apple Cinema Display or any Mini DisplayPort monitor.

GAO FiberOptics Inc.
Toronto   Canada
Sep 17, 2009 Designed to convert 1000Base-T signals to 1000Base-X fiber signals and vice versa, SFP (Mini-GBIC) Ethernet media converter extends connection distance between 2 Gigabit Ethernet devices via fiber cable without performance degradation. It conforms to IEEE802.3z standard and supports both full- and half-duplex modes with data transmission rates of 2,000 and 1,000 Mbps, respectively. Backward compatible with 10M, 100M, and 10/100M equipment, unit supports multi- and single-mode fibers.

Phoenix Contact
Harrisburg, PA 17111 0100
Jul 23, 2009 Supporting most communication interfaces and bus systems, PSI-MOS 1300 Media Converters feature proactive alarming and local LED diagnostics for fiber optic cable connection. Single fiber optic modules with dual fiber cable connections provide redundant point-to-point, star, tree, and ring topologies, depending on communication system. T-bus connection system allows sharing of data and supply voltage. Fiber optic cable distances can range from a few feet to more than 20 miles.

GAO FiberOptics Inc.
Toronto   Canada
Jul 14, 2009 Optimized for 10/100/1000 Mbps Gigabit optical Ethernet transmission networks, Model MG1000A conducts transmission of packets over VLAN and extends transmission distance of network from 100 m to 120 km over copper wires. It provides QoS functionality that ensures transmission of VoIP packets, as well as STP to form redundant network. Unit supports mutual signal conversion between 10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX, and full-duplex/half-duplex transmission modes.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 16, 2009 Fully compliant with 802.3u 100 Base TX/FX standard, QuickSwitch® model 4195 fiber SC duplex to RJ45 auto fallback A/B switch/converter allows for accessing 2 separate SC duplex, multimode, 100 base FX ports from 100 Base TX fast Ethernet port. It has built-in fiber optic/twisted pair copper conversion. Unit allows for setting switch position manually or remotely when in A/B switch mode, while it automatically selects its switch position in auto fallback mode.

GAO RFID Inc.
Toronto   Canada
May 28, 2009 Equipped with multiple serial interfaces, series GAO227 automatically detects serial signal baud rate which allows for continued transmission of signal through RS-485, RS-422, or RS-232 to fiber converter. Unit extends serial transmission distance up to 2 km on multi-mode fiber or up to 20 km on single-mode fiber. Converter features high isolation voltage, anti-electromagnetic interference, and avoids lightning by using optical fiber as a communication transmission medium.

GAO Tek Inc.
Toronto M1B2K4  Canada
May 27, 2009 Supporting both full- and half-duplex communication, Plug and Play Ethernet media converters are designed to convert data signals between 10/100 Base-Tx and 100 Base-Fx fast Ethernet. They are used as standalone unit or as slide-in module to converter rack or in central wiring closet. Converters come with built-in remote diagnostic capability and feature switch chip design, 512 Kb SSRAM buffer, and 2 K MAC address list. Models include 3301, 3302, 3303, 3305-1, 3305-2, and 3305-3.

GAO Embedded Inc.
Toronto 12345  Canada
May 08, 2009 Supporting transmission in dual-fiber multi-mode, dual-fiber single-mode, and single-fiber single-mode fibers, intelligent adaptive fast Ethernet fiber converters conduct mutual conversion between 10Base-T/100Base-TX pair electrical signals and 100Base-FX optical signals. They feature low heat dissipation and are suited for use in 10/100 Mbps fast Ethernet long-distance transmission networks. Models include MA830A, MA830AC, MA830ACS, MA830AP, MA830APS, and MA830AS.

GAO FiberOptics Inc.
Toronto   Canada
Apr 22, 2009 Designed to perform flow control and reduce broadcast packets, 10/100 Mbps adaptive fast Ethernet fiber converter, GAOMB610A implements mutual conversion between 10Base-T/100Base-TX pair electrical signals and 100Base-FX optical signals. Unit uses switching technology and storing/forwarding technology to implement data transmission between 2 types of network connection media. It supports transmission in dual-fiber multi-mode, dual-fiber single-mode, and single-fiber single-mode fibers.

Allied Telesis
Bothell, WA 98011
Apr 22, 2009 With PoE capabilities as well as internal power supply, AT-PC2002/POE Fast Gigabit Ethernet rate media Converter enables effective deployment of bandwidth-intensive end points such as surveillance IP cameras and VoIP phones. It provides up to 15.4 W and connects to 100 and 1,000 Mbps SFP devices via copper port, supporting both speed and high-performance media conversion. It suits applications where devices need to be powered more than 100 m away from main network.

Electro Standards Laboratories
Cranston, RI 02921 3403
Apr 15, 2009 Facilitating access to any one of 8 separate fiber optic networks, QuickSwitch Model 4193 with pushbutton eliminates plugging and unplugging of fiber optic patchcords, minimizing connector wear. Internal circuitry ensures isolation between networks/devices, where as common port converts selected fiber optic network port to 100BaseTX interface. Eight network ports of switch are 1,300 nm 100 Mbps ST duplex multimode fiber with SC duplex available.

GAO Tek Inc.
Toronto M1B2K4  Canada
Apr 06, 2009 Designed for both optical and electrical networks, AASMA830AS, 10/100M adaptive fast Ethernet fiber converter has transmission distance of 120 km over copper wires. It conducts mutual conversion between 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals. Supported transmission are in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.

Electro Standards Laboratories
Cranston, RI 02921 3403
Mar 20, 2009 ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact desktop version, as well as board only version (Model 4153) for embedded applications.

Highland Technology, Inc.
San Francisco, CA 94103
Mar 17, 2009 Housed in compact extruded aluminum enclosure, J740 performs wideband analog conversion of fast fiber-coupled signals from DC to greater than 1 GHz. It features calibrated conversion gain of 1 V/mW (0.5 V/mW into 50W) and is compatible with single and multi-mode fiber. Available in 850, 1,310, and 1,550 nm wavelengths, unit suits applications including high-speed data links, fiberoptic test and measurement, and modulated analog and digital communications systems.

AXIOMTEK
Taipei   Taiwan
Feb 25, 2009 Designed to convert 10/100Base-TX Ethernet signals to 100Base-FX fiber, iCON-32900 series converter accepts voltage range from 12-48 Vdc. Features include Link Fault Pass-through (LFP) function which allows tracing network link failure; 2 redundant power inputs for non-stop operation; and relay output alarm. Offered in IP20 aluminum housing, unit meets NEMA TS1/2, UL1604, and UL60950 standards for harsh environments and can be DIN-rail-, rack-, or panel-mounted.

ORing Industrial Networking
Taipei County   Taiwan
Feb 03, 2009 Offering 3,000 V isolation protection, ISC-1112-I and ISC-1212-I are industrial RS-232 to RS-422/485 serial media converters that support multiple baud rates and multiple data formats in addition to auto switch baud rate from 300-115,200 bps. RS-485 control is completely transparent to user, and software written for half-duplex COM works without any modification. Supplied in ABS housing, DIN-rail or panel-mount products feature 10-30 Vdc power requirement and operating range from -10 to +70°C.

ORing Industrial Networking
Taipei County   Taiwan
Feb 03, 2009 Intelligent and stackable expansion modules, ISC-1210U-I and 1310U-I, connect to PC USB port/hub to provide one RS-232/-422 or one RS-485 serial port. Powered by USB interface, products deliver auto direction flow control on RS-485 and support full-duplex transmission for RS-232/-422. RS-232 standard also supports handshaking signals such as RTS/CTS. Along with 3,000 Vdc isolation, products offer transient suppression (RS-485 data lines) and support baud rates to 115.2 Kbps.

Electro Standards Laboratories
Cranston, RI 02921 3403
Nov 03, 2008 HP Fiber to RS-232 and HP Fiber to RS-485 converters connect fiber optic linked terminals to controller having either RS-485 or RS-232 interface ports. Models 4127 and 4129 convert HP Fiber to RS-485 while Models 4137 and 4139 convert HP fiber to RS-232. Both models provide full galvanic isolation (no metallic connection) between connected devices and acheive data transfer rate greater than 20 Kbps.

Dotworkz Systems, Inc.
San Diego, CA 92110
Sep 11, 2008 D2 IP camera enclosure integrates Zarlink converter module that operates on 12 or optional 24 Vdc power, and offers direct connection between 10/100Base-TX STP/UTP and 100Base-FX to extend network reach up to 2,000 m. It can be customized to withstand temperatures ranging from -40 to +155°F with Dotworkz CoolDome or Ring-of-Fire climate systems. Made from impact-resistant polycarbonate thermalplastic, unit does not rust/corrode, and is IP66 rated against dust, water, and salt-water.

Aaxeon Technologies, Inc.
Brea, CA 92821
Sep 03, 2008 Offered in single-mode and multi-mode models, Optolinx IMC-100A Industrial Media Converters are packaged in metal housing with IP30 rating. Units feature 12-48 Vdc redundant power input, contact closure for local alarm, and standard operating temperature of -10 to 70°C. Optional temperature range of -40 to 80°C is also available.