connectBlue Inc.    Chicago, IL 60601
May 15, 2013 Features such as WLAN dual-band functionality and omnidirectional, 11 cm, external stub antenna with RPSMA connector enable RWE251s to be used in 2.4 and 5 GHz ISM bands and flexible placement. Based on WLAN IEEE 802.11 a/b/g/n (Wi-Fi), IP65-rated and ready-to-use adapter operates from -30 to +65°C and offers user seamless roaming and redundancy. It suits industrial/medical applications where Ethernet cable needs to be replaced with wireless connection.

Acromag, Inc.    Wixom, MI 48393 7037
May 01, 2013 With dual Ethernet ports, removable front-facing terminal blocks, and support for rail power bus, BusWorks® XT Series interfaces discrete I/O signals directly to Ethernet/IP, Modbus/TCP, or Profinet measurement and control system network. USB port, also standard, provides PC connectivity for configuration and setup. Models XT1110 and XT1120 have sinking or sourcing outputs, respectively, as well as 16 DIO channels and read-back capability to verify status.

Symtavision GmbH    Braunschweig 38122  Germany
Apr 29, 2013 Intended for design and verification of embedded real-time systems, SymTA/S with Ethernet timing analysis integrates seamlessly with existing in-vehicle network timing analysis for CAN and FlexRay as well as with scheduling analysis for AUTOSAR-based ECUs. Ethernet analysis capability focuses on both standard IP Ethernet (Layer 3) and Audio Video Bridging. Model supports co-existence of internal ECU scheduling and Ethernet communication, including any triggering and synchronization requirements.

Altronix Corp.    Brooklyn, NY 11220
Apr 25, 2013 Transmitting IP video, data, and power over coaxial cable, eBridgePlus™ Ethernet over Coax/PoE Adapters enable legacy infrastructure to support IP devices up to 1,500 ft without repeaters. Receivers are available in 1-, 4-, and 16-port configurations that seamlessly operate with eBridgePlus single-port transceivers. Series supports PoE and PoE+ cameras, accessories, and access control devices. Utilizing managed midspan permits remote resetting and real-time status monitoring of devices.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 08, 2013 Designed for use with ICP® and traditional charge output sensors, PCB® Models 483C40 and 483C41 also accept direct voltage input and feature selectable low pass filtering. Model 483C40 can be setup and controlled via Ethernet interface, while Model 483C41 has Ethernet interface and front panel keypad and display for setup and control. Multi-Channel Signal Conditioner (MCSC) Control Software comes standard on both multichannel signal conditioners.

WinSystems, Inc.    Arlington, TX 76011
Apr 05, 2013 Implemented as PC/104-Plus add-in I/O module, PPM-GIGE-2-POE can manage power to remotely located POE devices or board stacks. Solution integrates 2 independent Gigabit Ethernet ports with Power Sourcing Equipment (PSE) circuits. Both POE interfaces can use separate external DC supplies or share one external power source. Operating from -40° to +85°C, 3.6 x 3.8 in. module uses RJ-45 connectors to plug into 10/100/1000Mbps networks using CAT5 unshielded twisted pair copper cables.

Weidmuller, Inc.    Richmond, VA 23236
Mar 25, 2013 Helping maintain existing automation components while upgrading infrastructure, serial to fiber-optic Ethernet converters enable integration of serial port devices into industrial Ethernet networks for transmission over distances up to 5 km without any external signal boosters. Devices offer conversions from RS-232, RS-422, or RS-485; come in SC and ST fiber connection options; and also protect against EMI. Automatic baud rate recognition facilitates installation and setup.

Liantec Systems Corp.    Taipei Hsien 235  Taiwan
Feb 18, 2013 With ultra low profile 1U slim PCIe add-on card form factor, Model 1uPCIe-1000 is suitable for systems with 1U or 1.75 in. of system height and can be installed without additional riser card. Card features onboard Intel PCIe 82574L Gigabit Ethernet controller and support for auto-switching 10/100/1000BASE Ethernet networking connection as well as Wake-on-LAN functions. Based on standard PCI Express bus interface, 1uPCIe is supported by motherboards with x1 PCI Express expansion slot.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Feb 15, 2013 Connecting terminal devices into redundant network structures, IEC 63439-3 compliant Scalance X-200RNA Redundant Network Access (RNA) modules offer fault-tolerant, bumpless industrial Ethernet communications in new or existing networks. Modules are available in plastic enclosure with 4 electric RJ45 ports or metal enclosure with 2 electric ports and 2 electric/optical combination ports. Diagnostics are available via LED, integrated Web server, or signaling contact.

Tripp Lite    Chicago, IL 60609
Feb 07, 2013 Suited for situations when computer needs Ethernet connectivity but has no network card or wireless capability, U336-000-R lets either PC or Mac instantly connect to 10/100/1000 Mbps network via USB 3.0 port. Compact USB bus-powered adapter supports connection speeds up to 5 Gbps and does not require any external power adapter.

ICS Electronics Corp.    Pleasanton, CA 94588
Feb 01, 2013 Enabling addition of Ethernet-based instruments to GPIB Test System, Model 4865B offers choice of 2 protocols: VXI-11 for communicating with VXI-11.3 compatible instruments, and Raw Socket for communicating with raw socket instruments. Transparent solution, configured over Ethernet via any Web browser, also provides optional settings that let user upgrade basic raw socket communication to be more GPIB-like with substitute command strings for GPIB commands.

WAGO Corp.    Germantown, WI 53022
Jan 23, 2013 Based on ETHERNET 2.0 Controller with SD Card, 750-880/0025-0002 ECO Telecontroller supports Smart Grid integration of small, localized renewable energy producers. DIN-rail mount product converts signals via connected I/O into utility-friendly, IEC-compliant data. Maximizing space within compact substation control cabinets, unit integrates Ethernet switch and dual Ethernet ports. SD Card Memory Expansion slot supplements 1 MB data memory with up to 32 GB of additional memory.

Siemens AG    Munich D-80333  Germany
Dec 27, 2012 By combining security features such as SPI firewall, password requests, and data encryption protocols such as FTPS and SNMPv3, Simatic CP 1543-1 communication module protects individual Simatic S7-1500 stations or entire automation cells against unauthorized access on Ethernet networks. Administrator can regulate access to Simatic S7-1500 via detailed firewall rules in CP 1543-1, and processor also supports IPv6 protocol, open communication via TCP and UDP, as well as S7 communication.

WAGO Corp.    Germantown, WI 53022
Dec 19, 2012 Intrinsically Safe 750-586 Module carries Ex [ia] Safety Approvals and provides signal current of 4–20 mA, linking WAGO Ethernet Controllers with actuators in hazardous location Zones 0, 1, and 2. ATEX and IECEx certified galvanically isolates field and system levels while providing short circuit-resistant outputs. Features promote safety in such atmospheres where gas and dust accumulate as well as hazardous location applications, such as oil/gas.

Turck USA    Minneapolis, MN 55441
Dec 14, 2012 Accommodating up to 2 signals types in any combination, BL compact™ makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID, or mixture of signal types in machine-mountable device over Ethernet. Drop-in solution, available with 4, 8, or 16 ports, comes in IP68/IP69K package and may be customized to suit specific needs. Functionality allows users to employ one device for 2 Ethernet protocols, including EtherNet/IP™ and Modbus™ TCP.

IXXAT Automation GmbH      Germany
Nov 16, 2012 With 6–32 V input range, aluminum housing, and -40 to +70°C operating range, ETCio 100 accelerates and facilitates connection of analog and digital input and output signals to EtherCAT systems. Module offers 2 analog inputs and 4 analog outputs with 12-bit resolution; output voltage can be individually programmed from 0 to +10 V. there are also 6 digital inputs and 4 digital outputs, with freely selectable output voltage range. Embedded board version is also available.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Oct 11, 2012 Suited for military and aerospace embedded applications, 1.5 x 1.6 x 6.5 in. Nano Interface Unit (NIU1) adds sensor data acquisition, distribution, and communication interfaces to mission computers. Integrated subsystem, able to connect to existing platform Ethernet networks to make data available to any system on network, leverages modular architecture to support Intelligent I/O™, motion simulation/measurement, and communications functions. PoE support is standard.

Turck USA    Minneapolis, MN 55441
Sep 24, 2012 Supplied in IP67 housing, BL67 satisfies applications requiring digital or analog inputs and outputs; specialty I/O, such as SSI and RFID; and serial inputs to Industrial Ethernet networks. Gateway for Ethernet/IP™ and Modbus™ TCP/IP combines multiple Ethernet protocols but only allows one Ethernet master to control outputs, while input and diagnostic data is available to other protocols. Product offers isolated power for 16 inputs and 16 outputs in addition to 16 I/O configurations.

WinSystems, Inc.    Arlington, TX 76011
Aug 13, 2012 Intended for SFF, industrial embedded applications, 90 x 96 mm PXM-GIGE connects to 10/100/1000 Mbps networks using CAT5 UTP copper cables and offers stackable PCIe expansion on PC/104 module with addition of high-speed SUMIT connector. This Gigabit Ethernet module, based on Intel® 82573 controller, plugs directly into SUMIT-ISM(TM) compatible products and supports Linux, Windows®, and other x86-compatible RTOSs.

Pulse Electronics    Trevose, PA 19053
Jul 30, 2012 Intended for server, LAN on motherboard, and storage markets, JT4-1120HL consists of 1x1, 10GBASE-T (10 gigabit over twisted-pair) integrated connector module (ICM). Pulse ICMs are tuned to have flat insertion loss curves and optimized return loss performance over 10GBASE-T frequencies. While ICM meets IEEE 802.3 and PCIe mechanical requirements for low profile, design helps 10GBASE-T system designers meet electromagnetic control system requirements such as FCC Part 15 class B.