Computer Hardware & Peripherals ->
Computer Networks ->
Network Interface & Transmission Equipment ->
Network Interface Cards & Adapters|
Network Interface Cards & Adapters
(Showing headlines 81 - 100) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Wireless Mobility System enables train-to-ground communications.
Tel Aviv 69710 Israel
May 03, 2011
Broadband Wireless Mobility solution delivers up to 30 Mbps net throughput for vehicles moving at speeds up to 150 Km/hr. Using this solution, fixed base stations are deployed every 2-10 km along track and mobile units are placed on moving train. Technology ensures seamless communications and smooth handover between base stations. Utilizing frequencies from 2.3-6 GHz, system offers low, constant latency of less than 3 ms regardless of traffic overload or spectral interferences.
Ethernet Network Adapter is optimized for storage connectivity.
ATTO Technology Inc.
Amherst, NY 14068
Apr 07, 2011
Simultaneously enabling FCoE, iSCSI, and TCP/IP, FastFrame(TM) 10 Gbps Ethernet Converged Network Adapter foster unified networks in data-intensive environments. Products, based on Fibre Channel (FC) technology, include 4-port card option and utilize Intel® Ethernet technology. Offering seamless integration with existing FC equipment without loss in performance, adapters also leverage Advanced Data Streaming Technology(TM) for consistent bandwidth optimization with minimal latency.
Network Adapter suits heavy-duty and commercial vehicles.
Simma Software, Inc.
Terre Haute, IN 47802
Mar 24, 2011
Supporting dual J1939 networks and single J1587/J1708 network, Vehicle Network Adapter allows OEMs, fleets, and service providers to connect in real-time to vehicle networks and instantly gather critical information such as active diagnostic faults and fuel economy metrics. For connections back to host computer, mobile computing device, or handheld device, adapter supports Hi-Speed USB, RS-232, and Ethernet connection.
Wireless Backhaul System delivers 2 Gbps of IP traffic/channel.
Ceragon Networks Ltd.
Tel-Aviv 69719 Israel
Feb 18, 2011
Supporting mobile Internet and broadband services in all-IP environments, FibeAir IP-10 E-Series delivers optimized spectrum utilization and comprehensive synchronization. Asymmetrical traffic payload delivery enables system to increase download capacity in asymmetrical deployment scenarios. With end-to-end Ethernet service management and Operation Administration and Maintenance tools, FibeAir IP-10 E-Series helps simplify network design.
Ethernet IP Communication Coupler enables high-density I/O.
Advantech - Industrial Computing Group
Milpitas, CA 95035
Feb 03, 2011
Leveraging ODVA (Open DeviceNet Vendors Association) authorization, APAX-5072 allows linking with any Ethernet IP master to facilitate building of Ethernet IP remote I/O solution. Dual RJ-45 ports with same IP address aid in building daisy chains, which lets users connect remote I/O devices directly without additional Ethernet switch. Also, dynamic configuration lets users configure different channels with different types and ranges in one module.
Ethernet XMC Module features dual 10 GbE interfaces.
Extreme Engineering Solutions (X-ES)
Middleton, WI 53562
Jan 24, 2011
Offering front-panel or rear I/O support, XPort3300 is available in conduction- and air-cooled versions respectively rated from -40 to +85°C and 0 to +55°C. Included x8 PCIe 2.0 port provides interface to host module via P15 connector; utilizes Intel® 82599, dual 10 GbE controller; and supports dual rear 10GBASE-T interfaces through P16 connector. Front-panel I/O for 10 GbE interfaces can be provided with dual-optical, SFP+, fiber-optic connectors, or single RJ-45 10GBASE-T connector.
SCADA System RTUs support supplemental communications module.
Nashua, NH 03063
Jan 21, 2011
Kingfisher and modular Kingfisher+ RTUs support MC-31 module, which provides integral Ethernet communications. Based on 32-bit processor, MC-31 adds 2 additional port options to Kingfisher Plus+ and supports its redundant configurations. Port options include isolated serial, fiber optic, PSTN modem, leased line modem, HART, spread spectrum radio, and Ethernet. Kingfisher Plus+ modular RTUs offer expansion up to 16 communications ports and 1,000 I/O points.
Modbus Gateways integrate Ethernet cascading capability.
Advantech Automation Corp.
Cincinnati, OH 45240
Jan 18, 2011
Able to fulfill installation and Web browser configuration requirements for remote monitoring applications, EKI-1221D and EKI-1222D offer transparent connectivity between Modbus (ASCII, RTU) serial devices and Ethernet-based Modbus/TCP equipment. Both have built-in Ethernet switches for cascading/daisy-chain connectivity and flexible cabling. Designed to fulfill any master/slave relationship, gateways provide 921k baud speeds and support 16 TCP masters and 16 TCP slaves.
Ethernet Networking Platform includes timing protocol processor.
San Jose, CA 95110
Dec 14, 2010
Suited for Ethernet-based networks, IEEE 1588v2-compliant solution for service provider, data center, and smart grid power control networks includes Broadcom® BCM53903 precision timing protocol (PTP) processor. Support for PTP enables system to synchronize clocks of different end devices over packet-based network to within 1 µsec. Product also integrates GbE switch, 1588v2-based Gigabit physical layer devices, and embedded software clock to add timing synchronization to networking products.
Cellular Fire Alarm Communicator offers triple-path redundancy.
Honeywell International Inc.
Morristown, NJ 07960
Nov 16, 2010
Model IPGSM-COM is primary fire alarm communicator that is UL-listed to provide Contact ID reporting, via IP or GSM cellular pathways, for any fire alarm control panel. Utilizing Honeywell AlarmNet network, triple-path redundancy ensures connectivity for life safety systems, and product uses IP path for primary communications, GPRS GSM for back-up, and SMS if GPRS is unavailable. It also uses 256-bit Advanced Encryption Standard to secure data traveling through each pathway.
Fire Alarm Communicator uses cellular communications.
Vernon Hills, IL 60061
Oct 21, 2010
Compliant with NFPA72, UL864-listed and dial capture-based Telguard TG-7FS can serve as primary communications path for commercial fire alarm systems. It replaces all landlines currently dedicated to master control unit and is able to signal failures to central station within 5 min of outage. Product also provides security dealers with cellular alarm communications solution for new and existing commercial customers who want to eliminate landlines.
Cash Drawer Interface reports status in real-time.
APG Cash Drawer, Inc.
Minneapolis, MN 55421-1012
Oct 20, 2010
Ready for connection to Thin Client POS system via Ethernet network, NetPro(TM) Ethernet Cash Drawer interface is identified with its own Network IP address and can report cash drawer status and access events in real time. Interface offers remote Help-Desk support for service and troubleshooting of cash drawer operation in distributed retail locations. Cash access and disconnection event data is time and date stamped for monitoring and detecting unusual events.
Wireless Situational Awareness System locates mobile devices.
Inovonics Wireless Corp.
Louisville, CO 80027
Oct 18, 2010
Radius(TM) interfaces to fire, access control, and environment systems, providing instant notification of emergencies to pagers, emails, and mobile phones using text messaging or voicemail. It determines where alarm is coming from within building, and routes information from in-building systems to mobile devices. Also working with pendant transmitters, universal transmitters, and motion detectors, it scales from single buildings to large multi-building campuses.
GbE Mapper and Software simplify 2xGbE transport development.
Fremont, CA 94538
Aug 24, 2010
Used for access and transport applications, GEM250 SoC and included DeviceManager(TM) software to accelerate development and deployment of dual GbE transport solutions for Coarse/Dense Wavelength Division Multiplexing (C/DWDM) networks. It delivers all operations, administration, maintenance, and provisioning features inherent in SONET/SDH, enabling efficient multiplexing of GbE links into single STM-16/OC-48 for transport across point to point links or WDM networks.
Ethernet I/O Module features web-based design.
Newburyport, MA 01950
Aug 20, 2010
Featuring built-in web server, Model RWM-824 provides 8 isolated open collector output channels and 8 isolated wet contact digital input channels. Each output channel supports 300 mA current driving at 10-40 Vdc and each digital input channel supports counter input (32 bits and 500 Hz max). Configuration, I/O monitoring, and I/O control can be accomplished via web browser. Supporting Modbus/TCP protocol, Model RWM-824 can integrate with SCADA software.
Networking Cable brings Ethernet to analog signal conditioners.
Wixom, MI 48393 7037
Aug 06, 2010
Providing DB25 male to 26-pin female IDC ribbon cable connection, Model 4001-110 interfaces rack of up to 16 3B or 5B modules, providing conditioned voltage signals from analog sensors to Ethernet I/O modules. Converting signal conditioners' outputs to digital data, Ethernet I/O modules can provide Modbus TCP/IP communication to PCs, PLCs, and other distributed control devices. Typical applications include SCADA, process control, and test and measurement systems.
Dual-Channel Modem connects Ethernet devices over coax or UTP.
Danbury, CT 06810
Aug 04, 2010
Featuring 2 standard BNC connectors, 2 terminal blocks, and 2 standard RJ-45 Ethernet connectors, Model CNFE2CL2MC allows Ethernet-based equipment to be connected over 75 W coaxial cable or unshielded twisted pair telephone wire. Unit can extend distances between devices to as much as 500 m on coaxial cable or up to 3,000 m on UTP. Featuring environmentally hardened design, modem operates in environments with extremes in temperature and vibration.
I/O Link System connects RFID system to network. .
Florence, KY 41042-0937
Aug 02, 2010
With IO-Link, users can connect complex devices, such as RFID processors, to industrial network via gateway using standard discrete wiring. Solution can replace I/O enclosure, 4 shielded cordsets, and 4-port RS232 PLC module with single IO-Link Expansion Module and four 3-conductor, non-shielded cordsets. Additional I/O points are made available by Expansion Module that can be used for analog devices, pressure sensors, or discrete sensors.
Compact WLAN Module offers antenna diversity.
Fujitsu Components America, Inc.
Sunnyvale, CA 94089
Jun 10, 2010
Offered as 802.11a/b/g SDIO wireless LAN module, MBH7WLZ23 provides integrated communications platform for OEMs designing low-power, battery-operated, wireless devices with limited board space. Surface-mount module supports dual band (2.4/5 GHz) operation from package measuring 12.0 x 12.0 x 1.8 mm, and antenna diversity enhances signal coverage. Max data rate is 54 Mbps, with 18 Mbps throughput under Windows CE.
Portable Wireless Network Kit allows set up of temporary security cameras.
Electronic Display Applications, Inc.
Southampton, PA 18966
May 25, 2010
Designed to create mobile LAN network of temporary wireless security cameras, PCComCase lets in-field user view, control, and record audio/video from network of temporary fixed or mobile wireless IP and RF security cameras as well as bridge temporary network to Internet. Powered by 2.53 GHz Core 2 Duo CPU, system features 4 GB RAM, 320 GB shock mount HDD, and 15 in. SVGA touchscreen monitor. Other components include 1 W, 802.11 b/g wireless router and 2.4 GHz A/V PC controlled receiver.
(Showing headlines 81 - 100) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20