RF Technologies, Inc.    Brookfield, WI 53005
May 14, 2013 Part of Code Alert® Quick Response Plus Wireless Call Solution, call stations are available in 5 models: Push Button Call Station, Nurse Call Cord Station, Nurse Call Cord Station with Check-in, Pull Cord Call Station, and Pull Cord Call Station with Check-in. Check-in features can record non-alarm events, such as resident or staff check-ins, or time log. Each model includes LED that blinks red when device is activated, giving residents peace of mind that call was placed.

RiT Technologies, Inc.    Mahwah, NJ 07430
May 09, 2013 Running over existing power trays, Beamcaster™ offers ultra-high bandwidth that can be shared by multiple smart outlets, each receiving maximum gigabit allocated and available at any point in time. Disruptive indoor wireless networking solution uses secure physical links and reinforces security via hard connections between smart outlets and computers. As intelligent, non-patching solution, Beamcaster allows all moves, adds, and changes to be performed remotely via management system.

Acromag, Inc.    Wixom, MI 48393 7037
May 01, 2013 With dual Ethernet ports, removable front-facing terminal blocks, and support for rail power bus, BusWorks® XT Series interfaces discrete I/O signals directly to Ethernet/IP, Modbus/TCP, or Profinet measurement and control system network. USB port, also standard, provides PC connectivity for configuration and setup. Models XT1110 and XT1120 have sinking or sourcing outputs, respectively, as well as 16 DIO channels and read-back capability to verify status.

Symtavision GmbH    Braunschweig 38122  Germany
Apr 29, 2013 Intended for design and verification of embedded real-time systems, SymTA/S with Ethernet timing analysis integrates seamlessly with existing in-vehicle network timing analysis for CAN and FlexRay as well as with scheduling analysis for AUTOSAR-based ECUs. Ethernet analysis capability focuses on both standard IP Ethernet (Layer 3) and Audio Video Bridging. Model supports co-existence of internal ECU scheduling and Ethernet communication, including any triggering and synchronization requirements.

Zonoff, Inc.    Malvern, PA 19355
Apr 09, 2013 Featuring hardware reference designs for Sentry wireless radio solution, Zonoff Distributed Radio Architecture facilitates communication back to home's primary automation controller, which houses brain of connected home via Zonoff Home Software. Since radios can be placed anywhere in home without wired Ethernet connection, consumers can use existing WiFi network to add home automation device in any location. Any Always-On CE device, such as HDTVs and routers, can also add home automation features.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 08, 2013 Designed for use with ICP® and traditional charge output sensors, PCB® Models 483C40 and 483C41 also accept direct voltage input and feature selectable low pass filtering. Model 483C40 can be setup and controlled via Ethernet interface, while Model 483C41 has Ethernet interface and front panel keypad and display for setup and control. Multi-Channel Signal Conditioner (MCSC) Control Software comes standard on both multichannel signal conditioners.

WinSystems, Inc.    Arlington, TX 76011
Apr 05, 2013 Implemented as PC/104-Plus add-in I/O module, PPM-GIGE-2-POE can manage power to remotely located POE devices or board stacks. Solution integrates 2 independent Gigabit Ethernet ports with Power Sourcing Equipment (PSE) circuits. Both POE interfaces can use separate external DC supplies or share one external power source. Operating from -40° to +85°C, 3.6 x 3.8 in. module uses RJ-45 connectors to plug into 10/100/1000Mbps networks using CAT5 unshielded twisted pair copper cables.

Matrox Graphics Inc.    Dorval Quebec H9P 2T4, CD   Canada
Apr 03, 2013 Compatible with APO IntellaPatch® Series 3000 XE network switches, Matrox Avio F120 and F125 KVM Extenders use full bandwidth available in 10 Gbps SFP+ transceivers to transmit 2 uncompressed HD video signals, USB keyboard and mouse, USB 2.0 devices, and stereo analog audio over single fiber-optic duplex LC-LC cable. Once each workstation is connected to port on IntellaPatch XE switch, administrators can use APO software interface to route workstation or server to remote location.

MICO, Inc.    North Mankato, MN 56002
Mar 05, 2013 Offering alternative to standard wired USB/CAN adaptors, MICO Electrohydraulic (EH) wireless CAN-bus interfaces with MOBEUS ABS/TC/ESC ECU (Electronic Control Unit) utilizing CAN-Bluetooth connection to MOBEUS Service and Diagnostic Tool LINC. Solution is designed for use with MICO EH braking systems in Off-Highway vehicles and is fully compatible with SAE J1939 CAN Communication standard. Respectively, max transmission ranges for single and bridge modes are 100 and 300 m.

Broadcom Corp.    San Jose, CA 95110
Mar 04, 2013 Simultaneously supporting 3G, 4G LTE, and WiFi offload capabilities for 200+ users, scalable small cell development platform for multiple radio access technology (RAT) integrates all required hardware and software. Modular design includes XLP-208 multicore processor as well as software which enables features such as content caching, interference monitoring, SON, DPI-based services, and security to be deployed while maintaining line speed performance as new network services are added.

Liantec Systems Corp.    Taipei Hsien 235  Taiwan
Feb 18, 2013 With ultra low profile 1U slim PCIe add-on card form factor, Model 1uPCIe-1000 is suitable for systems with 1U or 1.75 in. of system height and can be installed without additional riser card. Card features onboard Intel PCIe 82574L Gigabit Ethernet controller and support for auto-switching 10/100/1000BASE Ethernet networking connection as well as Wake-on-LAN functions. Based on standard PCI Express bus interface, 1uPCIe is supported by motherboards with x1 PCI Express expansion slot.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Feb 15, 2013 Connecting terminal devices into redundant network structures, IEC 63439-3 compliant Scalance X-200RNA Redundant Network Access (RNA) modules offer fault-tolerant, bumpless industrial Ethernet communications in new or existing networks. Modules are available in plastic enclosure with 4 electric RJ45 ports or metal enclosure with 2 electric ports and 2 electric/optical combination ports. Diagnostics are available via LED, integrated Web server, or signaling contact.

GAO FiberOptics Inc.    Toronto   Canada
Jan 25, 2013 Integrating functions of digital optical phone and stabilized light source into one unit, model C0240001 carries out full-duplex communication and operates at 1,310 or 1,550 nm. Modulation frequencies include 270 Hz, 1 kHz, 2 kHz, and CW. Used during installation, optical testing, maintenance, and fiber attenuation value testing in data, CATV, and telecom networks, product provides transmission distance of up to 80 km and output power range of -5 to -7 dBm.

WAGO Corp.    Germantown, WI 53022
Jan 23, 2013 Based on ETHERNET 2.0 Controller with SD Card, 750-880/0025-0002 ECO Telecontroller supports Smart Grid integration of small, localized renewable energy producers. DIN-rail mount product converts signals via connected I/O into utility-friendly, IEC-compliant data. Maximizing space within compact substation control cabinets, unit integrates Ethernet switch and dual Ethernet ports. SD Card Memory Expansion slot supplements 1 MB data memory with up to 32 GB of additional memory.

WAGO Corp.    Germantown, WI 53022
Dec 19, 2012 Intrinsically Safe 750-586 Module carries Ex [ia] Safety Approvals and provides signal current of 4–20 mA, linking WAGO Ethernet Controllers with actuators in hazardous location Zones 0, 1, and 2. ATEX and IECEx certified galvanically isolates field and system levels while providing short circuit-resistant outputs. Features promote safety in such atmospheres where gas and dust accumulate as well as hazardous location applications, such as oil/gas.

Turck USA    Minneapolis, MN 55441
Dec 14, 2012 Accommodating up to 2 signals types in any combination, BL compact™ makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID, or mixture of signal types in machine-mountable device over Ethernet. Drop-in solution, available with 4, 8, or 16 ports, comes in IP68/IP69K package and may be customized to suit specific needs. Functionality allows users to employ one device for 2 Ethernet protocols, including EtherNet/IP™ and Modbus™ TCP.

Honeywell    Golden Valley, MN 55422 3935
Dec 07, 2012 Combining ANSI-Z87.1-2010 impact protection and hands-free voice communication, Uvex AcoustiMaxx™ lets workers in remote or noisy environments focus on task at hand while remaining protected and in contact with their teams. Wrap-around design comes with Genesis® S lenses in both clear and gray as well as Uvextreme® anti-fog lens coating. Compatible with any Bluetooth-enabled voice communication product, eyewear employs dual-microphone technology and balanced armature driver.

IXXAT Automation GmbH      Germany
Nov 16, 2012 With 6–32 V input range, aluminum housing, and -40 to +70°C operating range, ETCio 100 accelerates and facilitates connection of analog and digital input and output signals to EtherCAT systems. Module offers 2 analog inputs and 4 analog outputs with 12-bit resolution; output voltage can be individually programmed from 0 to +10 V. there are also 6 digital inputs and 4 digital outputs, with freely selectable output voltage range. Embedded board version is also available.

Laird Technologies    Chesterfield, MO 63017
Oct 18, 2012 Available in 2 maximum conducted output powers of 125 mW and 50 mW, RM024 Range-Amplified MultiPoint Wireless Module features FHSS protocol for optimal interference and multipath immunity. Client/server architecture allows for more than 16 million clients to be addressed and communicating within network. Backward compatible with LT2510 module, RM024 is suitable for machine-to-machine applications, sensing and control networks, and long-range, low-bandwidth digital signage.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Oct 11, 2012 Suited for military and aerospace embedded applications, 1.5 x 1.6 x 6.5 in. Nano Interface Unit (NIU1) adds sensor data acquisition, distribution, and communication interfaces to mission computers. Integrated subsystem, able to connect to existing platform Ethernet networks to make data available to any system on network, leverages modular architecture to support Intelligent I/O™, motion simulation/measurement, and communications functions. PoE support is standard.