Multiplexers

Computer Hardware & Peripherals, Electrical Equipment & Systems

Managed 10-Port Ethernet Switches provide 2 combo ports.

April 28, 2016

Supporting 12~48 Vdc power input, LMX-1002C-SFP Series is designed with eight 10/100Tx Fast Ethernet RJ45 ports and 2 gigabit combo ports (2*10/100/1000Tx RJ45 or 2*100/1000 dual rate SFP slots for fiber). Switches are pre-loaded with Layer 2 network management software. Suited for harsh environments, fanless IP30-rated units feature dual power input design with reverse polarity protection, and built-in relay warning function to alert when ports break or power failures occur. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Industrial 8-Port Ethernet Switch has Layer 2 management software.

April 19, 2016

Supplied in IP30, fanless, 54 x 99 x 142 mm enclosure, LMX-0800 series supports 12–48 Vdc input and features eight 10/100Tx Fast Ethernet ports that provide EFT, surge (2,000 Vdc), and ESD (6,000 Vdc) protection. Other features include dual power input design, support for Web Console or Telnet via serial console using CLI configuration, redundant networking ring function, external USB2.0 port, and built-in SNMP, VLAN, IGMP, and QoS. RSTP and ITU-G.8032 support are also standard. Read More

Computer Hardware & Peripherals

Microsemi's Outdoor Power-over-Ethernet Switch Wins Security Industry Association's Best Network Support Solution Award at ISC West New Product Showcase

April 15, 2016

Company's Device Recognized for Innovation in Electronic Physical Security ALISO VIEJO, Calif. – Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced it is the recipient of the Security Industry Association's (SIA) New Product Showcase (NPS) Best Network Support Solution... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Ethernet Switches feature eight 10/100/1000Tx RJ45 ports.

April 14, 2016

With 12~48 Vdc power input range, 8-port LMX-0800G Series is designed for applications in harsh or outdoor environments. Managed non-PoE switches feature 16 Gigabit backplane speed that supports Jumbo Frame and wide bandwidth for large Ethernet data packet transmission. Pre-loaded with Layer 2 network management software, products have external USB 2.0 port and dual power input design with reverse polarity protection. Fanless IP30-rated switches are DIN-rail and wall-mountable. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Optics & Photonics

Managed PoE+ Switch, Transceiver aid IP device deployment on coax.

April 12, 2016

As managed Ethernet over Coax (EoC) Receiver with integral PoE+ switch, eBridge™8E provides 1 Gb uplink and 8 ports for deploying IP cameras and devices up to 500 m at 25 Mbps without repeaters. Max output is 240 W (30 W per port full power), and LINQ™ Technology lets user monitor, control, and report power from anywhere. Transmitting data up to 500 m at 25 Mbps without repeaters, eBridge1ST single-port hardened transceiver is compatible with 1-, 4-, 8-, or 16-port Altronix eBridge receivers. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Managed Gigabit PoE Switches are optimized for surveillance.

April 11, 2016

Along with Layer 2 switching options, 10-port DGS-1100-10MP and 26-port DGS-1100-26MP provide features, such as surveillance VLAN and customized Surveillance Mode UI, intended for IP surveillance applications. Bandwidth control, cable diagnostics, and loopback detection are standard. While DGS-1100-26MP supports 24 Gigabit ports, 2 Gigabit Combo ports, and overall PoE budget of 370 W, DGS-1100-10MP supports 8 Gigabit PoE ports, 2 Gigabit SFP ports, and 130 W total PoE budget.<br /> Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Managed Ethernet Switches suit harsh or outdoor environments.

April 5, 2016

Supporting 12~48 Vdc power input, 12-port LMX-1204G-SFP Series is designed with eight 10/100/1,000Tx Fast Ethernet RJ45 ports and four 100/1,000 dual rate SFP slots for fiber. IP30-rated switches feature 24 Gigabit backplane speed, supporting Jumbo Frames and wide bandwidth for large Ethernet data packet transmissions. Pre-loaded with Layer 2 network management software, units provide ring network redundancy with STP/RSTP/MSTP and ITU-T G.8032 protocol, which enables <50 ms network recovery time. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Industrial 8-Port PoE+ Gigabit Managed Switch has 12-36 Vdc input.

April 4, 2016

Designed for use in harsh or outdoor environments, IP30-rated LMP-0800G-24 series has 8 IEEE 802.3at/af-compliant (PoE+/PoE) 10/100/1000Tx gigabit ports as well as built-in voltage booster to support full 48 Vdc PoE output for each PoE port. Features include PoE output up to 30 W per port, 16 Gigabit backplane speed, and pre-loaded Layer 2 network management software. Fanless, 54 x 99 x 142 mm Ethernet switch is DIN-Rail and wall mountable and supports ring network redundancy function. Read More

Computer Hardware & Peripherals

When the 'Industrial' Label Matters - Deutsche Windtechnik Discovers the Pitfalls of Commercial Grade Equipment

March 29, 2016

Deutsche Windtechnik replace unreliable commercial grade Device Networking Equipment with Perle Industrial Products after continuous and costly system failures NASHVILLE, TN – While many forms of raw renewable energy are free and seemingly infinite, the equipment needed to collect, process and transport the energy is not. With many wind farms located in difficult to reach offshore and... Read More

Computer Hardware & Peripherals, Controls & Controllers, Electrical Equipment & Systems, Mechanical Power Transmission, Plant Furnishings & Accessories

When the Industrial(TM) Label Matters - Deutsche Windtechnik Discovers the Pitfalls of Commercial Grade Equipment

March 24, 2016

NASHVILLE, TN – While many forms of raw renewable energy are free and seemingly infinite, the equipment needed to collect, process and transport the energy is not. With many wind farms located in difficult to reach offshore and hill-top locations, where wind can be harvested without physical interruptions, it is imperative to invest in infrastructure products that are able to withstand... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices

GbE Switches, Media Converter support high-bandwidth networks.

March 15, 2016

With one SFP fiber port and one copper port, MCW-211-F1G-T1G unmanaged industrial Ethernet media converter connects legacy serial devices to Gigabit Ethernet (GbE) networks. Unmanaged Ethernet switches SDW-541-F1G-T4G and SDW-550-T5G offer 5 copper or one fiber plus 4 copper ports. Units support 100 Mbps or Gigabit Ethernet, with SDW-550-T5G also supporting 10 Mbps communications. Distances of up to 120 km can be achieved using Westermo pluggable 100 Mbit or Gigabit SFP transceivers. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Managed Ethernet Switches withstand harsh environments.

February 11, 2016

Suited for harsh or outdoor environments, 8-port LMX-0802 Series is designed with six 10/100Tx fast Ethernet RJ45 ports, and two 100Fx fiber ports with either SC or ST connector. IP30-rated switches feature dual power input design with reverse polarity protection and built-in relay warning function to alert of power failure. Operating from 12~48 Vdc, series is pre-loaded with Layer 2 network management software and provides ring network redundancy function with RSTP and ITU-G.8032 support. Read More

Computer Hardware & Peripherals

Ethernet Switch is suited for PLC automation systems.

February 10, 2016

Offered with copper and fiber ports for connections up to and over 40 km, fault-tolerant Industrial Real-time Ring(TM) Ethernet switch ET-9RS features 9 ports and network redundancy. Self-configurable product provides recovery time under 5 ms per hop and allows over 50 switches to be connected per ring. With priority queuing and port mirroring, product filters messages to prevent broadcast storms. There are no delays with store and forward wire-speed switching. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Unmanaged Ethernet Switches provide 5 ports.

January 20, 2016

Designed with 5 Gigabit Ethernet ports that are IEEE 802.3at compliant (PoE+) on ports 1&ndash;4, Series LNP-0500G and LNP-0500G-24 feature 48&ndash;55 Vdc high voltage power input and 12&ndash;36 Vdc low voltage power input, respectively. Units support MDI/MDI-X functions and 10 Kbytes jumbo frame, making them suited for applications that demand high bandwidth and long distance communication. DIN-rail and wall mountable, fanless IP30-rated switches include high EFT, surge, and ESD protection. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

PDU Ethernet Switches feature green Ethernet technology.

December 11, 2015

Merging PDU and unmanaged network switch into single 1U device, PDU Ethernet Switch Combos offer 12 outlets and 24 Gigabit Ethernet ports. Eight ports on PoE+ model can provide up to 30 W of power per port for devices like VoIP phones, wireless access points, and surveillance cameras. PoE+ model also includes 2 SFP ports for optical network uplink to additional units. With green Ethernet technology, switches detect length of connected network cable and adjust power consumption accordingly. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Ethernet Switches drive enterprise adoption of 2.5 GbE.

November 23, 2015

For wired enterprises, BCM56160 adds 2.5 GbE access point connections to 24- and 48-port Gigabit Ethernet form factors, integrates 10 Gigabit interfaces for fiber uplinks, and delivers double stacking bandwidth. For all-wireless office built primarily on Wi-Fi access points, BCM56060 is optimized for 802.11ac Wave 2 enterprise environments and provides multi-mode 1 GbE/2.5 GbE Ethernet interfaces with 10 Gigabit uplinks. Both switches are built on Broadcom&#39;s StrataXGS® architecture. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Transportation Industry Products

Automotive-Qualified Ethernet Switch establishes secure network.

November 2, 2015

With integrated PHYs, BroadR-Reach® BCM8953x series enables automotive manufacturers to address bandwidth concerns, ensure standards compliance, and secure network for connected car applications. Architecture supports non-blocking, line-rate data transfer at wire speed performance for all frame sizes over unshielded single-pair twisted cable. Based on 28 nm design, switch integrates low pass filters, incorporates multiple low-power mode technologies, and surpasses AEC-Q100 and EMC requirements. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Test & Measuring Instruments

New Rugged Industrial Ethernet Switches and Media Converter Feature UL Class 1 Div 2 Approval

September 25, 2015

Acromag offers Antaira rugged Ethernet switches and a media converter to complement their remote Ethernet I/O product families. Wixom, MI – The LNX Series of unmanaged rugged industrial Ethernet switches and IMC media converters are now available from Acromag. Select from a variety of models with up to 8 ports for copper or fiber cabling on fast Ethernet or Gigabit networks. Most units... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Ethernet Switches permit flexible, real-time communication.

July 22, 2015

Providing data rates up to 100 Mbps, Layer 2 Scalance XB-200 series provides functions for increasing safety and for configuration, diagnostics, and management of networks. These hazardous area-certified switches support Profinet and EtherNet/IP standards (selected by user via switchover function) and VLANs. Supplied in plastic enclosure with widths of 40, 80, or 120 mm, products feature up to 16 electrical and 3 optical connections and can cover distances up to 26 km in single mode. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Westermo Switches Provide Mission Critical Reliability Below the Oceans

June 3, 2015

Extracting oil and gas from subsea reservoirs is very challenging and requires sophisticated technology to ensure safe and efficient production. Subsea systems are constantly being developed and improved, and as a result, the boundaries of which reservoirs are considered economically unviable or inaccessible are continually changing. Improving data communications are playing an important role,... Read More