Motorola, Inc.    Schaumburg, IL 60196 4041
May 23, 2012 Enabling additional HD channel support, increased video on demand delivery, and accelerated upstream/downstream bandwidth services, VSN200 provides cable operators with end-to-end solution that leverages existing network infrastructure while increasing bandwidth capacity. This 1 GHz, 2x2 optical node features Gallium Nitride performance and lets operators repurpose existing housings by installing new system using Electronics Package (E-Pack) and Lid swap.

Libelium Comunicaciones Distribuidas S.L.    Zaragoza   Spain
May 21, 2012 Equipped with audio interface and small camera for video recording, 3G Shield for Arduino enables connectivity to high-speed WCDMA and HSPA cellular networks with transfers up to 7.2 Mbps. Internal GPS, combining standard positioning data from satellites with mobile cell triangulation in assisted mobile mode, enables location of any Arduino, indoors or outdoors. With module, Arduinos can make HTTP and HTTPS connections, downloading/uploading content to any web server in Cloud using 3G networks.

Weidmuller, Inc.    Richmond, VA 23236
Mar 14, 2012 Encased in metal housing with -40 to 167°F temperature range, Ethernet WLAN Modem is IEEE 802.11a/b/g compatible in 2.4 and 5.8 GHz bands. Power can be supplied to device using PoE or with redundant power supply connections. Ability to utilize PoE and support multi SSID, VLAN, and QoS makes module suited for integration into existing wired/wireless Ethernet networks. To prevent unauthorized access to networks, unit includes WPA/WPA2 encryption and RADIUS server authentication.

Semaphore    Nashua, NH 03063
Mar 12, 2012 Designed for remote monitoring and SCADA system applications, T-BOX LT and T-BOX MS are available with cellular modems that are compatible with GSM quad band and UMTS triple band 3G cellular networks worldwide. T-BOX LT Ethernet RTU provides up to 32 I/O points, while modular T-BOX MS can accommodate up to 20 communications ports and over 800 I/O points. Decentralized architecture enables integration of programmable automation, alarm management, data logging, and IP telemetry.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Mar 09, 2012 Suited for TD-SCDMA and LTE markets, Marvell® PXA1802 multimode TD LTE modem chipset integrates TDD, FDD LTE, and TD-SCDMA technology onto single chip. Thin architecture includes DSP modem core; cellular baseband core; PWU; DMA; and external interfaces. Supporting next-generation LTE standards with Cat 4 150 Mbps downlink throughput and Release 8 TD-SCDMA High-Speed Packet Access (HSPA+), modem includes processor core with packet processing accelerators and L1/L2 caches.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Mar 06, 2012 Targeting China's TD market, PXA1202 TD-HSPA+ (Time-division Evolved High-Speed Packet Access) modem incorporates low-power and 3.5G technologies and enhances Time Division Synchronous Code Division Multiple Access (TD-SCDMA) downlink data transfer rates to 8.4 Mbps. Using 40 nm process, modem delivers DLDC and TD- HSPA+ technology that supports 64 QAM, TS0 enhancement technologies, and receiver diversity.

AVM GmbH    Berlin 10559  Germany
Mar 01, 2012 Using LTE mobile phone standard, FRITZ!Box 6842 LTE combines WLAN N, 4-port Gigabit Ethernet, USB port, telephone system, and DECT base station as well as analog port for phones and fax machines. Smaller FRITZ!Box 6810 LTE provides DECT, WLAN N, and Ethernet connection. LTE data transfer rates are comparable to those of cable and DSL connections, offering downstream transfer up to 100 Mbps and upstream rates of 50 Mbps. Since both support voice over LTE, fixed line connections can be replaced.

SkyBitz    Virginia, VA 20164
Feb 10, 2012 SkyBitz® Galaxy series GTP1000 and GTP1100 are built on SkyBitz GLS9602 modem platform, which combines Global Locating System technology with Iridium® 9602 short burst data transceiver. While Galaxy GTP1000 provides installation verification via LED lights, Galaxy GTP1100 has external antenna that enables flexible, stealthy installation. Both provide connectivity to remote locations via global satellite communications network, affording operations managers total asset/cargo visibility.

EvoLogics GmbH    Berlin D-13355  Germany
Jan 31, 2012 Supporting up to 255 modems with up to 5 ADCPs connected to each, S2C/2/ADCP v2.0 features optimized data delivery protocol for downloading files over hydro-acoustic channel that maximizes speed of file transfers. If acoustic connection breaks during file download, retrieval procedure does not have to start from beginning. Custom PC client-software enables remote ADCP selection, downloading files from ADCP data storage, and running scripts over acoustic link.

AirTight Networks, Inc    Mountain View, CA 94043
Jan 18, 2012 For retail, hospitality, or quick serve restaurants, AirTight Cloud Services provide WLAN network with minimum complexity while satisfying PCI DSS wireless security requirements. Captive portal and walled garden capabilities give merchants way to expand interaction with guests by providing opt-in localized content, creating loyalty programs, and garnering in-store customer feedback. Wireless IDS/IPS delivers continuous threat scanning/detection, performance monitoring, and custom reporting.

Spreadtrum Communications Corp.    Sunnyvale, CA 94085
Jan 12, 2012 Designed with 40 nm CMOS silicon, SC9610 integrates multiple communication standards - multiband TD-LTE and TD-SCDMA as well as quad-band EDGE/GPRS/GSM - into single-chip design. Solution is specifically designed for communication standards in use in China, supports multiple bands, and achieves respective downlink and uplink speeds of 100 and 50 Mbps. Furthermore, product supports 5, 10, 15, and 20 MHz channels and 2x2 MIMO.

SI Tech, Inc.    Batavia, IL 60134
Dec 19, 2011 Measuring 4 x 3.6 x 1.2 in., Industrial Ethernet to Fiber Optic Bit Driver® Model 2151 provides one 10/100 Mbps Ethernet port and 1 Fiber Port, which can be multimode or single mode. Unit offers DIN rail mounting with redundant 10-32 Vdc power input. Housed in IP40 rated enclosure, Ethernet board is conformal coated for environmental protection from dust, dirt, and humidity. Model 2151 supports IEEE 802.3 spec, MDI using auto negotiation, or manual setting.

Broadcom Corp.    San Jose, CA 95110
Nov 01, 2011 Combining baseband modem and network processor in one chip, Model BCM85620 delivers functionality of 10 application-specific standard parts. Device provides 1.25 Gbps throughput along with radio-optimized traffic delivery needed for network synchronization, enabling wireless backhaul systems to support requirements of 4G/LTE networks. In addition to packet fragmentation and header compression, SoC includes adaptive code and modulation technology, which automatically provisions bandwidth.

D-Link Systems, Inc.    Fountain Valley, CA 92708
Oct 14, 2011 Featuring 802.11n wireless technology for 300 Mbps speeds, Model DSL-2740B enables ADSL subscribers to upgrade wireless-g device to integrated modem and wireless-n router. IPv6-ready unit is backward compatible with 802.11b/802.11g devices and includes QoS support, prioritizing high-bandwidth activities for seamless streaming, gaming, and Internet calling. Model DSL-2740B offers 4 Ethernet ports, WPA(TM)/WPA2(TM) and WEP data encryption, and 24 Mbps downstream/3.5 Mbps upstream transmission.

Broadcom Corp.    San Jose, CA 95110
Oct 05, 2011 HomePlug® AV 1.1 certified and IEEE 1901 compliant, 40 nm BCM60321 Powerline Networking SoC combines analog and digital front end with line driver, modem, and memory in 9 mm 76-pin QFN package. Device provides repeating, channel bonding, failover, and load balancing for layer-2 in multi-mode home networks. Consuming less than 2.5 W when ON and less than 0.5 W in standby, Model BCM60321 supports remote network management and diagnostics for ISP deployments.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Sep 15, 2011 Marvell® PXA1801, fostering Internet-connected device design, features True Mobile Multi-RAT design that combines 3GPP R9 Cat 4 FDD-LTE and TDD-LTE with R8 DC-HSPA+ for both WB-CDMA and TD-SCDMA standards and EDGE. Also, integrated R8 WCDMA HSPA+ (42 Mbps DL) and R8 TD-SCDMA HSPA+ (8.4 Mbps DL) capability ensures access to data regardless of infrastructure availability in any one location. LTE technology supports optimal performance with Category 4 throughputs of 150 Mbps DL (Down Link).

Ceragon Networks Ltd.    Tel-Aviv 69719  Israel
Sep 13, 2011 Suited for IP/MPLS backhaul in 3.5G and 4G/LTE networks, FibeAir® IP-10C delivers up to 1 Gbps of IP traffic on single radio channel. Unit offers asymmetric traffic delivery, adaptive coding and modulation, and wide range of channels, extending from 3.5-56 MHz. Featuring all-outdoor design that withstands harsh weather conditions, platform can be mounted on rooftops, lamp posts, traffic light poles, and in small outdoor mobile cell sites.

RACOM    Nové Mìsto na Moravì   Czech Republic
Aug 02, 2011 Featuring software-configurable 12.5 or 6.25 kHz channels with respective maximum data rates of 42 and 21 kbps, RipEX Software Defined Radio with Linux OS allows data transmission speeds to 83 kbps in 25 kHz channel in 160-900 MHz bands. Ports include 2 COMs, Ethernet, and USB, and GPS option is available. Supplied in die-cast aluminum casing, radio operates from -40 to +70°C and can maintain connections over distances of 50+ km without line-of-sight visibility.

Broadcom Corp.    San Jose, CA 95110
Jun 15, 2011 Model BCM3383 DOCSIS®/Euro-DOCSIS(TM) 3.0 cable gateway SoC combines Full-Band Capture (FBC) technology, dual-band concurrent Wi-Fi, and custom applications processor. FBC digital tuning technology directly samples and digitizes entire 1 GHz downstream spectrum of cable plant, providing access to any channel from anywhere. With simultaneous 2.4 and 5.0 GHz IEEE 802.11 band streams, gateways can segregate data and video distribution.

CalAmp Corp    Oxnard, CA 93030
Jun 01, 2011 Suited for private networks operating across VHF, UHF, and 900 MHz licensed spectrum, Guardian(TM) Data Modem provides high-speed serial connectivity that enables remote monitoring and control of utilities, oil and gas, and other industrial applications. Narrowband unit offers user-selectable data rates of 4,800, 9,600, and 19,200 bps with single radio store-and-forward operation, software-programmable channel bandwidth, on/off-line diagnostics, and programmable external I/O interface.