|
|
|
|
Computer Hardware & Peripherals ->
Computer Networks ->
Network Interface & Transmission Equipment ->
Media Converters
Media Converters
(Showing headlines 1 - 20) more ....
|
 Serial to Fiber Optic Converters extend signal reach.Weidmuller, Inc.
Richmond, VA 23236
Mar 25, 2013
Helping maintain existing automation components while upgrading infrastructure, serial to fiber-optic Ethernet converters enable integration of serial port devices into industrial Ethernet networks for transmission over distances up to 5 km without any external signal boosters. Devices offer conversions from RS-232, RS-422, or RS-485; come in SC and ST fiber connection options; and also protect against EMI. Automatic baud rate recognition facilitates installation and setup.
|
Media Converters feature high-temperature design.Perle Systems Inc.
Nashville, TN 37210
Feb 28, 2013
Using only components that are fully qualified and rated to operate in -40 to +175°F, Industrial Temperature Media Converters address need to transparently connect copper Ethernet equipment to fiber optic cable, extending data transmission link up to 160 km. Units are housed in rugged steel casing and include on-board microcontroller to deal with error detection and recovery. Converters are suited for security cameras, wireless access points, alarms, traffic controllers, and sensors.
|
Gigabit Ethernet Converter features RJ45 and SFP port.GAO FiberOptics Inc.
Toronto Canada
Jan 31, 2013
Modular, plug-and-play C0310001 converts Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). With respective transmission distances of up to 80 km and 550 m, media converter works with single- and multi-mode fiber and operates at 1,310/1,550 nm in single fiber WDM and 850 nm in multi-mode. Along with auto-negotiation, features include support for automatic cross of twisted pair ports and auto selection of MDI/MDI-X.
|
 Media Converter accommodates 10/100 and 1,000 Mbps transmission.ComNet
Danbury, CT 06810
Nov 19, 2012
Allowing user to select between 10/100 Mbps and 1,000 Mbps rate transmission, CNMCSFP variable-rate electrical-to-optical media converter is suited for application upgrades to Gigabit transmission or when use of different bandwidth consumption devices are planned. Using small form factor (SFP) devices, single-channel universal converter supports different fiber types, connector types, and distances.
|
Media Converter includes Link Fault Pass-through function.GAO FiberOptics Inc.
Toronto Canada
Nov 13, 2012
Available for wavelengths of 1,310 nm in multi-mode and 1,310 nm and 1,550 nm in single-mode, Model C0320002 converts 10/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet fiber signals. LFP function optimizes integrity and conformity of TP-Fiber linking for maintainability of network. Converter supports distances up to 2 km for multi-mode fiber and up to 120 km for long-haul single mode fiber between LAN switch, file server, and another networking device.
|
 Media Converter Modules create 10 Gigabit Ethernet links.Perle Systems Inc.
Nashville, TN 37210
Nov 08, 2012
Installed in high density MCR1900 Media Converter Chassis, C-10G Unmanaged Media Converter Modules create 10 Gigabit Ethernet links, over multimode or single mode fiber, that can be extended from 26 m up to 160 km in high-density applications. Each unit comes with 2 pluggable transceiver ports that support fiber to fiber, copper to fiber, or copper to copper media conversion.
|
 Fiber to Ethernet Converters provide robust data exchange.Weidmuller, Inc.
Richmond, VA 23236
Jan 19, 2012
Featuring real-time compatibility, Industrial Ethernet media converters provide reliable data exchange between copper and fiber optic media. Products enable integration of glass fibers into network while remaining transparent to other network devices. Ethernet, via an RJ45 port, is converted to optical port with SC or ST glass fiber connections. Along with Link Fault Pass-Through technology, features include redundant power inputs, MTBF of over 401k hr, and -40 to +75°C operating range.
|
 Fiber Optic Modem supports 10/100 Mbps Ethernet.SI Tech, Inc.
Batavia, IL 60134
Dec 19, 2011
Measuring 4 x 3.6 x 1.2 in., Industrial Ethernet to Fiber Optic Bit Driver® Model 2151 provides one 10/100 Mbps Ethernet port and 1 Fiber Port, which can be multimode or single mode. Unit offers DIN rail mounting with redundant 10-32 Vdc power input. Housed in IP40 rated enclosure, Ethernet board is conformal coated for environmental protection from dust, dirt, and humidity. Model 2151 supports IEEE 802.3 spec, MDI using auto negotiation, or manual setting.
|
 Fiber-to-RS485/422/232 Converter comes in 3 configurations.Electro Standards Laboratories
Cranston, RI 02921 3403
Oct 05, 2011
With integrated rate buffering, Model 4149 (desktop), Model 4149-DIN, and Model 4159 (board) operate from -40 to +85°C with typical speeds to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. Model 4149-DIN provides enclosure and all mounting hardware and brackets for installation in DIN-rail application. Model 4159 features front-mounting threaded brackets for rack mounting in embedded applications.
|
 Media Converter turns Ethernet signal via CAT5 to optical fiber.GAO Tek Inc.
Toronto M1B2K4 Canada
Jun 22, 2011
Primarily used for Gigabit Ethernet device links in backbone network transmission, 10/100/1000M media converter operates at 1000 Mbps over optical and electric channels. It supports single- and multi-mode fibers with respective transmission distances to 80 and 550 m and also extends transmission distance through its photoelectric conversion network. Available network connections include 10/100/1000M Base-T Gigabit Ethernet UTP port and 1000Base-Sx/LX Gigabit Ethernet Fiber port.
|
 Fiber Optic Media Converter integrates PoE capability.ComNet
Danbury, CT 06810
May 31, 2011
As 1000FX fiber optic media converter, CNGE2MCPOE provides PoE function for compatible peripheral devices. It supports IEEE 802.3at PoE standard for use for as Power Sourcing Equipment (PSE), supplying up to 25 W of power. Designed for use in harsh environments, product allows 10/100/1000TX Ethernet data to be transmitted optically over either multimode or single-mode optical fiber by application-specific, optional SFP modules.
|
Mode Converter Fiber Coupler uses Gaussian profile fiber input.JK Lasers
Warwickshire CV21 1QN United Kingdom
Feb 25, 2011
Mode Converter Fiber Coupler (MCFC) takes Gaussian profile single-mode fiber input from fiber laser and couples it into Luminator(TM) fiber. Focused spot sizes in range of 60-1,500 µm can be selected by use of appropriate Luminator process tools. Product has detachable output fiber and suits welding applications where profile and small spot size of Gaussian beam are not optimal, such as butt welding parts with fit-up tolerances larger than Gaussian spot size or thin foil welding.
|
 High-Performance Photoreceiver has rugged, compact package.Highland Technology, Inc.
San Francisco, CA 94103
Feb 08, 2011
Model PH200 Nanowatt Photoreceiver is free-space optical/electrical converter that provides near shot noise performance. Device features photon feedback architecture that delivers bandwidth of greater than 1 MHz, and which provides linearity, bandwidth, and dynamic range suitable for 10 nA to 100 µA photodiode signals.
|
 Fiber Media Converter features 3.2 Gbps switch fabric.KORENIX Technologies
Taipei 231 Taiwan
Jan 12, 2011
Equipped with 2 Fast Ethernet copper ports and 2 fiber ports, JetCon 2302 can act as 4-port 10/100 Mbps Fast Ethernet Fiber Switch or 2-channel Fiber Converter suitable for industrial applications. Integrated alarm relay informs users when port or power event occurs. Using anti-electromagnetic interference capability and dual redundant 10~60 Vdc power inputs, JetCon 2302 operates from -25 to 75°C and provides failure-safe power connection under harsh conditions.
|
 Port Converter Rack accommodates 14/16 slide-in modules.GAO FiberOptics Inc.
Toronto Canada
Dec 14, 2010
Able to link transparently with backbone equipment in LAN workgroup environments, 14/16 Port Converter Integrated Rack accommodates slide-in modules of various types of media converters at central location for multiple segment cross connections. Unit operates at distances up to 100 m and provides intelligent management and monitoring of critical connections. Featuring mix of 10 Mbps, 100 Mbps, and Gigabit media converter cards, device conforms to IEEE802.3u 10/100Base-TX and 100Base-FX standards.
|
 Ethernet Switches and Media Converters have industrial grade design.Westermo
Stora Sundby Sweden
Dec 01, 2010
Comprised of Ethernet switches, media converters, and PoE switches, i-line is optimized for machine building, building/factory automation, and CCTV surveillance applications. All are DIN rail mountable and use industry-grade components. Configurable relay triggers alarm signal for port or power events, and dual 24 Vdc power screw terminal inputs accommodate applications where secondary power source is used to maintain system integrity. IP31 aluminum alloy enclosure is standard.
|
IP Surveillance System aids transition from analog to digital.Allied Telesis
Bothell, WA 98011
Oct 15, 2010
Delivering mission-critical network connectivity, IP Surveillance System facilitates analog-to-digital migration without need to replace current cabling infrastructure. AT-8100 Series access-edge switches enable SD storage and analytics of video content at edge while connecting local copper devices over fiber at distances up to 1.2 miles. Designed to convert existing analog phone-grade wiring into IP-ready cabling, AT-MC 605/606 media converters support mega-pixel IP security video streaming.
|
Multimedia Converter Rack evolves with network growth.GAO Comm
Toronto M1B 2K4 Canada
Sep 02, 2010
Featuring 14 or 16 slots that accommodate slide-in media converter modules, 19 in. 2U OPT14/16 series can link transparently with backbone equipment such as switches or routers to LAN workgroup segments. It fosters multiple segment cross connections and accommodates mix of 10 Mbps, 100 Mbps, and Gigabit media converter cards. Suited for connecting evolving networks, product operates at distances up to 100 m and optionally supports 8.3/125, 8.7/125, or 10/125 µm single-mode fibers.
|
Fast Ethernet Media Converters comply with IEC61850, IEEE1613.AXIOMTEK
Taipei Taiwan
Jul 28, 2010
Supplied in hardened aluminum case and rated for -40 to +75°C operation, IP30-rated iCON-1141 series translates transmission signals from 100BASE-TX cable to 100BASE-FX fiber optic cable. Link fault pass-through helps identify network errors, while redundant power and relay output warning alarm help prevent damage and loss. Available in all types of fiber cabling and connector types, converters feature 768K bits buffer memory and full wire-speed forwarding rate.
|
 Converter/Extender System includes ESD protection circuitry.Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 13, 2010
Designed to extend USB connections via high-speed Fiber Interface, Model 4162 Host and Model 4169 4-port Hub are suited for environments subject to high EM or RF interference that might corrupt USB communications over copper interface. Four-port hub provides USB standard of 500 mA per port. Operating from 0 to +50°C, system offers true plug-and-play operability with support for Windows®, Mac OS®, Linux® and all USB device types at up to 480 Mbps.
|
(Showing headlines 1 - 20) more ....
|
Latest Products in the News |
Sustainability Dashboard Tools, LLC - May 16, 2013 Cloud Based to Cut Costs
Vishay Intertechnology, Inc. - May 16, 2013 Vishay Intertechnology Enhances Precision Thin Film Chip Resistor Arrays with Tighter Tolerances and Temperature Coefficients for Automotive and Industrial Applications
KORENIX Technologies - May 16, 2013 Reliable and Stable USB to Serial Solution - Korenix JetCon 1100/1200 Series
KORENIX Technologies - May 16, 2013 Korenix JetBox 8195 Industrial PC with Gigabit and 12-24V Booster PoE for high-speed security & surveillance systems
TraceSecurity - May 16, 2013 TraceSecurity Earns Three Honors in 8th Annual Hot Companies and Best Products Awards Program
Bunting Magnetics Company - May 15, 2013 Bunting to Show New Products at WasteExpo 2013 in New Orleans
Vecoplan, LLC - May 15, 2013 Vecoplan Commissions Feedstock Preparation System as Part of Waste-to-Biofuels Project for the City of Edmonton
Nim-Cor, Inc. - May 15, 2013 NimCor Offers Two Different Styles of Chucks Used Widely in the Converting Industry
Webex, Inc. - May 15, 2013 Unique Rollers Create Pleated Filter Media
ILC Dover - May 15, 2013 ILC Dover Receives Cleanroom Certification
More Products in the News...
|
|
|