Computer Hardware & Peripherals ->
Computer Networks ->
Network Interface & Transmission Equipment ->
Hubs & Concentrators|
Hubs & Concentrators
(Showing headlines 1 - 20) more ....
USB Charging Station accommodates up to 4 devices.
Fremont, CA 94538
Jun 12, 2014
FUEL Station mini 4-Port USB Charge Base enables simultaneous charging of up to 4 USB-powered devices – tablets, smartphones, Bluetooth™ speakers, cameras, and others – from one wall outlet. Along with built-in power supply, portable solution features integrated over voltage, over current, over temperature, leakage, and short circuit protection to ensure mobile device is safe while charging.
Carrier Hub enhances MicroTCA-based systems.
Henderson, NV 89052
May 06, 2014
Along with 40 GbE option, synchronous Ethernet, and advanced clocking/GPS capability, UTC004 MicroTCA Carrier Hub (MCH) provides PCIe Gen 3, SRIO Gen 2, and crossbar switch (CBS) option. Latter allows any fabric to be utilized, including custom solutions. Module enables flexible master/slave clock and time synchronization to multiple clocking standards, features quad PLL clock network synchronizer, and supports JTAG Virtual Probe for remote programming or debugging.
PoE Injector Hub powers devices in difficult locations.
Versa Technology Inc.
Chino, CA 91710
Jan 17, 2014
Compliant with IEEE 802.3af and High Power IEEE 802.3at PoE standards, HPOE-460 Gigabit Injector Hub features 4 individual ports that combine maximum of 30 W of power output and data over CAT 5/5e/6 Ethernet cable. Unit meets requirements of high power network devices, such as wireless LAN access points with multiple channels, PTZ cameras, and PoE IP phones.
Sensor Hub leverages ULP MCU core for optimal efficiency.
San Jose, CA 95131
Nov 05, 2013
Sensor hub solutions combine inputs from multiple sensors and sensor types and provide real-time direction, orientation, and inclination data to enhance application performance. Also included, ultra-low-power (ULP) SAM D20 Cortex M0+ core offers intelligent peripherals, including dedicated hardware to support touch inputs, and various communication features. Core offloads application processor, and hubs provide designers with flexible OS capabilities.
Distributed Control Node accelerates grid modernization.
San Jose, CA 95126
Oct 22, 2013
Designed to help electric utilities accelerate grid modernization and optimization programs, Model DCN 3000 establishes intelligent communication infrastructure between grid devices and utility head-end through variety of wireless and fixed connectivity options. Multi-protocol, multi-application data concentrator and applications processor manages smart meters, sensors, and other grid devices on low-voltage grid. ARM processor and Linux-based platform support security and networking features.
USB Charger has 4 vertical USB ports, 4.2 A charging capacity.
Melville, NY 11747
Oct 15, 2013
Able to simultaneously charge up to 4 USB devices, 4-Port USB Charger is engineered to fit in standard wallbox and use standard wallplate. It can be multi-ganged with any wiring device. Microprocessor and smart chip technology enable charger to recognize and optimize charging of tablets, smartphones, mobile phones, e-readers, digital cameras, and other electronic devices. Spacing between ports provides room to maneuver when inserting cables and reduces stress on cables once positioned.
ATCA Hub Switch features four QSFP 40G ports.
ZNYX Networks Incorporated
Fremont, CA 94538
Sep 09, 2013
Based on Ultra5™ ZX2000 5U ATCA blade server platform, Model ZX2040 features integrated shelf manager using 8-core Intel® Atom™ processor C2000. Unit has 4 QSFP 40G ports for external connections to system, 8 GB DDR3 ECC memory, onboard mSATA, Broadcom® Trident Plus 480G switch fabric, and Pigeon Point ShMM 700 for shelf management. With ZX2040 hub switch, ZX2000 5U ATCA blade server can provide up to 480G on backplane to fulfill demanding data plane applications.
MicroTCA Ecosystem features conduction-cooled design.
Henderson, NV 89052
Aug 14, 2013
Designed for rugged applications, MicroTCA Ecosystem includes Air Transport Racks, MicroTCA Carrier Hubs, Power Modules, and Advanced Mezzanine Cards. MicroTCA Carrier Hubs, which act as shelf controllers, feature 400 MHz RISC CPU for low latency. Power Modules provide true hot-swappability with dual 10–36 V inputs and outputs up to 800 W. Modules also include dual Intelligent Platform Management Interface and two banks of 256K Flash for redundancy.
Multi-Port USB Hub syncs up to 10 devices to one computer.
WoodWare By Design, Inc.
Lititz, PA 17543
Aug 08, 2013
Intended for use with Infinity Mobile Device Cart (MDC), WoodWare A-USB Hub obtains maximum performance from multiple USB 2.0 devices connected to one computer. This 10-port high-speed USB hub has 2 swivel ports and one AC adapter, allowing user connect up to 10 USB devices to one USB port on notebook, PC, or MAC. Functionality meets/exceeds USB 2.0 specifications for data transmission rates up to 480 Mbps, and integrated current protection safeguards equipment from over-voltages.
Dual-Port PoE Passive Hub features IEEE 802.3at compliance.
Irvine, CA 92614
Jul 12, 2013
Operating from -40 to +55°C, plug-and-play PD-9002GHO/AC complies with IEEE 802.3at standards for delivering 30 W of power per port while ensuring reliable operation in outdoor environments for 2 standard PoE data terminals. IP66-rated solution, supporting 10/100/1000 Mbps connectivity, allows WLAN access points, IP cameras, WLAN mesh, small cell backhauls, and other outdoor applications to receive power and data over standard Ethernet cables without any change to existing infrastructure.
Wireless System targets operators of oil and gas terminals.
Honeywell International Inc.
Morristown, NJ 07960
Jun 12, 2013
Combining wireless-enabled products, services, and productivity tools tailored for terminal operators, OneWireless™ Terminal Solution includes ISA100-compatible Honeywell Enraf SmartRadar FlexLine wireless radar gauge, which utilizes integrated radio to send tank level measurements securely and wirelessly to central control room. FlexLine is also used as data concentrator, collecting data from local tank instruments and sending it wirelessly through same ISA100 network.
USB Controller Hub ICs simultaneously support USB2 and HSIC.
Microchip Technology, Inc.
Chandler, AZ 85224 6199
Jun 11, 2013
Providing programmability, UCH2 ICs enable developers of PCs and mobile devices to configure designs without external memory. Devices support both USB2 and USB High Speed Interchip connectivity, maximum battery life via low-power modes, and ability to replace wall chargers with battery charging modes, such as BC1.2, Apple®, SE1, and China charging. For applications that need to communicate over multiple protocols, ICs feature direct I/O bridging to I2C™, SPI, UART, and general-purpose I/O.
USB Hub, Card Reader Combo has rotatable design.
New Delhi 110001 India
Mar 28, 2013
Measuring 45 x 44 x 20 mm, Just Inn 3-port USB hub and card reader combination can be rotated 180° to accommodate desktops and laptops with vertical or horizontal USB slots. Portable device is hot swappable and supports plug-and-play installation. Compatible with such operating systems as Windows® 98/SE/ME/2000/XP/7/8/Vista, MAC OS 9.2 and later, as well as LINUX, device supports USB 2.0 and data transmission rates to 480 Mbps. LED light indicates power.
MicroTCA Carrier Hubs support MTCA.4 specification.
Poway, CA 92064
Feb 25, 2013
Suited for high-speed data acquisition applications, Models AM4904/AM4910 support 4 high-speed fabric variants, including GbE, sRIO, PCIe, and 10 GbE. Units are equipped with 600 MHz PowerPC 405 EX processor for MCMC functionality and switching management, and enable redundant system architectures with up to 12 AMCs, 2 cooling units, and 4 power units. To provide support for various telco clocks, MCHs feature sophisticated clock implementation and PCI Express Fabric Clocking distribution.
Rigid/IMC Conduit Terminating Hubs offer range of options.
Crouse-Hinds Div., Cooper Industries, Inc.
Syracuse, NY 13221
Feb 11, 2013
Designed for indoor or outdoor use with rigid conduit and IMC, Myers™ conduit hubs come in materials such as zinc, stainless steel, and aluminum and are available with IEC/Ex and ATEX approvals. Design facilitates installation and includes oversize nut with radial serrations to ensure flush installation and positive grounding. Other features include captive O-ring gasket, precision machine cut NPT threads, and insulated throat. Vibration-proof design ensure secure installation.
Large Scale WLAN System provides seamless zero-handoff roaming.
New York, NY 10004
Dec 05, 2012
Supporting wireless coverage area of 100,000+ sqm, Extricom LS-3000 suits large-scale WLAN environments, such as large logistics hubs, regional medical centers, and hotels where seamless roaming is crucial. Channel Blanket™ technology provides up to 4 blankets of wireless coverage, each of which can be set up to support different business requirements. Solution eliminates co-channel interference, provides multiple uplinks, and takes advantage of reflected RF rather than being hindered by it.
Network Hub supports 4G speeds, reach, and capacity.
Aug 01, 2012
Operating on TELUS 4G LTE network, Smart Hub 4G provides users with landline equivalent Internet, phone, and WiFi connectivity without fixed broadband connection. Internet connection can be shared across multiple wireless devices with WiFi speeds up to 300 Mbps. Unit includes Quad-Band HSPA+, 2 Voice ports, Ethernet LAN 10/100, Ethernet WAN, and automatic failover to Wireless WAN, as well as WEP, WPA, and WPA2 wireless security and VPN pass-through support.
Hardware Module multiplexes CAN interfaces.
GOEPEL electronics LLC
Austin, TX 78759
Jul 20, 2012
Designed as hat rail module, Hub4x enables simultaneous information exchange with several units under test. Hardware provides both Master and Slave CAN, whereby master unit communicates with all Hub4x modules via connected Master CAN. Each module can be connected to UUT, resulting in 1:1 control. Via master unit, connected Hub4x modules can be configured with regard to routing and gateway functionalities. Additional I/O is provided for internal synchronization or control of triggered outputs.
USB 3.0 Hub Controller consumes less than 0.5 W under load.
VIA Technologies, Inc.
Taipei 231 Taiwan
May 04, 2012
Featuring integrated 5 V DC-DC switching regulator, 4-port Model VL812 supports transfer rates of USB 3.0 specification, while remaining backwards compatible with USB 2.0 and 1.1 hosts, hubs, and devices. Users can attach external 2.5 in. USB 3.0 hard drive, USB 2.0 Flash drive, and USB mouse simultaneously without AC adapter, when connected to USB 3.0 port. Integrating battery charging controller logic, VL812 enables dedicated charging port and charging downstream port functionality.
4-port USB Hub features extended temperature operation.
Acces I/O Products
San Diego, CA 92121 1506
Feb 09, 2012
Housed in 4 x 4 x 1 in. industrial steel enclosure for shock and vibration mitigation, 4-port Model USB-104-HUB features data transfer rates up to 480 Mbps and temperature range of -40 to 85°C. Device lets users add USB-based I/O to embedded systems or connect peripherals such as external hard drives, keyboards, GPS, and wireless. Offered in bus-powered and self-powered models, hub offers choice of DC power input jack, screw terminals, or 3.5 in. drive power connector.
(Showing headlines 1 - 20) more ....