IOGEAR
Irvine, CA 92618
Oct 21, 2008 Suited for students and traveling professionals, 3-Port USB 2.0 Mobile Hub Model GUH276 features 3 evenly spaced, upward-facing USB ports that prevent blockage to other outlets when user connects dongle or flash drive to another port. Built-in mini-USB cable enables mobile users to charge and transfer content from cell phones, MP3 players, and other USB devices without extra cord.

Electro Standards Laboratories
Cranston, RI 02921 3403
Sep 12, 2008 Ruggedized Model 4165 converts USB 2.0 compliant data from a PC to a serial asynchronous data interface over fiber with selectable baud rate of up to 3 Mbps. Device includes ESD protection circuitry on USB I/O connector while power input, protected from transients, has 3 kVdc isolation to prevent system ground loops. User-selectable fiber polarity and dual DB9 power connectors are also included. Also available, Model 4166 is board only with threaded brackets for rack mounting.

Other World Computing
Woodstock, IL 60098
Aug 26, 2008 Mercury Elite-AL Pro USB 2.0 Dual-Drive Storage Solution is offered in 6 versions with 500 GB to 2 TB storage capacity and 60 MB/sec data transfer rates. Additional 2 powered USB 2.0 ports on rear and one USB 2.0 port directly on front eliminates need for separate USB hub. Unit features compact, shock resistant design, protective aluminum package, and blue activity LED behind front grille that shows when drive is being accessed.

Aspen Optics
Kowloon Bay   Hong Kong (prc)
Aug 19, 2008 Suited for telecom operators, Geebic WS-G5485U/D-AO GBIC enables bi-directional transmission on older switch models without SFP ports. It turns 1 Gb circuit into 2 Gb circuit using 4 bi-directional GBICs, by deploying existing fiber. Transceiver helps users employ same optical fiber for both transmission and reception functions, which allows network to free up bandwidth for other applications. Utilizing GBIC ports, unit accelerates implementation of FTTx.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 18, 2008 Model 6765 is high speed, 4-channel Logic-to-Fiber Interface Converter that translates 4 input/output logic pairs into 4 fiber pairs, resulting in total of 8 fiber optic connections. It features user selectable fiber light ON polarity, ST fiber connectors, and logic test points for signal monitoring. Powered from 5 Vdc, circuit board is suited for embedded applications.

GAOTEK Inc
Toronto   Canada
Jul 01, 2008 Gigabit Interface Converter (GBIC) modules support 850, 1,310, and 1,550 nm wavelength and 1.25 and 1.0625 Gbps data rates at working distances from 300 m to 10 km. Suited for high performance, point-to-point communication requiring gigabit or fiber channel interconnections, hot pluggable units have low EMI and low power dissipation. With up to 1.25 Gbps bi-directional data link, they are compliant with IEC 60825-1, IEC 60825-2, and IEEE 802.3z/Gigabit Ethernet specifications.

ADLINK Technology Inc.
Irvine, CA 92618
May 29, 2008 Comprised of EC-8560 ExpressCard® extension card, shielded cable, and ruggedized extension system, ECS-8582-4S expands 5 and 3.3 V PCI slots from ExpressCard®-based laptop computer via shielded cable connection up to 23 ft long. PCI devices installed in extension system behave and work as if directly installed in host system, and isolation minimizes affect of high-frequency interference from CPU, memory, or chipset of host system on PCI devices.

Igus, Inc.
East Providence, RI 02914 0349
May 20, 2008 Suited for industrial environments requiring USB 2.0 connection, Chainflex® USB Cables provide data transmissions up to 16.4 ft. Cables feature pressure-extruded, flame-retardant, TPE-blend outer jacket; minimum bend radius of 12.5 times outer cable diameter; and operating temperature range of -31 to +158°F. Equipped with overall shield for EMI protection, silicon-free cables are unaffected by high-noise environments where crosstalk is problematic.

StarTech.com
Groveport, OH 43125
Apr 14, 2008 Respectively available in 3, 6, and 10 ft lengths, UUSBHAUB3, UUSBHAUB6, and UUSBHAUB10 USB A to MicroUSB B Cables provide users with universal mobile device interconnect that allows file transfers, data synchronization, and charging. Technology enables one type of cable to be used with both smart phones and mobile phones.

Electro Standards Laboratories
Cranston, RI 02921 3403
Apr 04, 2008 Model 4149 high speed ruggedized Fiber-to-RS485/422/232 interface converter offers operating speeds of 1.5 Mbps for RS232 to fiber conversion and 20 Mbps for RS485/422 to fiber conversion. Operating from -40 to +85°C, it features protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit can be powered from wide input range of 9-36 Vdc, and from 4.5-9 and 18-72 Vdc voltage ranges for other models.

silex technology america, Inc
Salt Lake City, UT 84107
Jan 23, 2008 Using SX-2000WG+, streaming video and audio USB devices can be shared among multiple Windows and Macintosh users over 802.11b/g wireless network or 10/100 autosensing Ethernet wired network. To provide transparent network access to USB devices, SX Virtual Link software emulates direct USB port on Windows or Macintosh systems and transfers packets out over network to SX-2000WG+. Unit supports USB 2.0 Hi-Speed device connectivity; isochronous devices are limited to USB 2.0 Full-Speed.

Wisair
Tel-Aviv 69710  Israel
Jan 16, 2008 Wireless USB host and device dongle set includes host dongle, device dongle with power supply, software drivers, management application, and documentation. Based on WSR601 CMOS single-die chip, reference design incorporates UltraSpeed(TM) technology, which uses several acceleration schemes to optimize data processing, and enables throughput in range of 70-100 Mbps when connected to Host Wire Adapter and up to 200 Mbps when connected to Wireless USB native host.

Degree Controls Inc.
Milford, NH 03055
Nov 28, 2007 Requiring only standard USB connection to PC, multi-port Model ATM2400 supports up to 36 separate sensors to collect real-time measurements in multiple locations simultaneously. Coupled with Accutrac v5.0 software, device offers data recording with accuracy of ±5% of reading from 0-70°C. Software provides real-time graphing and statistical analysis, adjustable test time length, sensor calibration date displays, and sampling rates as fast as 10 readings/sec.

Advantech Automation Corp.
Cincinnati, OH 45240
Nov 19, 2007 Model USB-4622 is capable of connecting 5 USB slave modules with 480 Mbps data transmitting rate. Device adapts to 24 V standard and is powered by 10-30 Vdc input adapter. Lockable cable design secures module connections, preventing cable from being unplugged accidentally, and portable, DIN-rail mountable product is designed for rugged industrial USB-based applications.

Altronix Corp.
Brooklyn, NY 11220
Oct 24, 2007 Suited for video surveillance deployments, HubWayLD Hubs transmit UTP video and RS-422-S485 data on single CAT-5E or CAT-6 cable. Units are available with 8 or 16 video channels in 1U rackmount chassis, as well as wall mount or desktop configurations. Offering selectable power ratings of 24 or 28 Vac, hubs can be ordered with or without integral distributed camera power outputs. They include built-in PTCs, surge suppression, and adjustments for picture quality and gain control.

Gao Tek
Toronto M1B2K4  Canada
Sep 24, 2007 Supporting more than 6,000 and 8,000 devices, respectively, Models VP280 and VP380 are capable of handling devices such as PROM, PLD, flash microcontrollers, serial and parallel memory. They are also designed for IC testing, including TTL 74 series, CMOS Logic IC, plus DRAM and SRAM memory devices. Units interface with any laptop, PC, PS/2, or compatibles through USB port. Auto-run mode starts programming automatically upon detection of chip insertion.

IOGEAR
Irvine, CA 92618
Sep 10, 2007 Model GUWH104KIT Wireless USB Hub and Adapter Kit enables SOHO users to wirelessly transfer files and data at speeds up to 480 Mbps. It achieves wireless communication between computers and USB peripherals, allowing transmission of video, audio, and picture files, as well as other high-bandwidth data. Featuring 4 USB ports, hub can associate with up to 3 laptops/PCs, through W-USB adapters. Adapter plugs into PC and wirelessly communicates with hub, which users can place up to 30 ft away.

Saelig Co., Inc.
Pittsford, NY 14534
Sep 06, 2007 Powered entirely from PC's USB port, Model USB-485-K provides RS422/485 port on PC that only has USB port available. Isolation between USB interface and RS422/485 interface is 1,500 Vac RMS, suitable for breaking ground loops or for protecting equipment. Supporting baud rates up to 115,200, self-contained, 1 m adapter cable contains unique USB device ID, allowing multiple converters on same PC since each will appear under new COM port number.

IOGEAR
Irvine, CA 92618
Jul 30, 2007 Dual-port USB 2.0 multifunctional print/storage server, GMFPSU22W6, lets users share Multi-Function Printers (MFPs) and additional USB 2.0 storage devices such as external hard drives, flash drives, and memory card readers. Once plugged into network via Ethernet connection, palm-sized device lets users from any networked computer share MFP to print, scan, and fax. Included USB 2.0 Hub extension enables up to 5 USB devices to be accessed over IP network.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 12, 2007 Featuring ruggedized design, Model 4149 operates at speeds of 1.5 Mbps for RS232-to-fiber conversion and 20 Mbps for RS485/422-to-copper conversion. Power input is protected from transients and features 3 kVdc isolation to prevent system ground loops. Powered from 9-36 Vdc input range, converter operates from -40 to +85°C and includes user-selectable fiber polarity, dual DB9 power connectors, as well as TX, RX, and power indicator LEDs.