Beckhoff Automation LLC
Minneapolis, MN 55337
Nov 06, 2009 Moisture- and dust-resistant, IP67-rated EP2338 EtherCAT® Box features 8 channels that can be used as inputs or outputs. Filter constant of inputs is 10 µs, while outputs, handling load currents up to 0.5 A, are short-circuit-proof and protected against inverse polarity. If channel is used as output, input is read back in parallel and can additionally be used for short-circuit analysis. Pre-assembled cables facilitate EtherCAT and signal wiring while preventing wiring faults.

ViXS Systems Inc.
Toronto M2J 1R3  Canada
Nov 05, 2009 TransXmedia(TM) Low Power USB Stick Reference Design converts and streams multi-media content in various HD and Internet video formats on range of end devices. It enables manufacturers ablility to utilize 1,250 DMIPS application processor to offload CPU intensive tasks. Including Xtensiv(TM) USB software package, device is capable of multi-stream HD/SD media processing and supports HD/SD simultaneous output and multiple audio formats. Multiple encryption/decryption engines are also included.

Saelig Co., Inc.
Pittsford, NY 14534
Oct 29, 2009 Enabling users to connect I2C devices via USB port, IOW24-DG operates at 100 kHz and allows of up to 750 bytes/sec throughput. Handshaking via clock stretching is supported, along with programmable time-out function, to prevent dongle from hanging up due to malfunctioning slave devices. Comprised of assembled PCB, 4-wire cable, and 2-part snap-fit dongle case, product is sized to not block adjacent USB ports and available with 5 and 3.3 V outputs to power small external circuits.

Fairchild Semiconductor
San Jose, CA 95134
Oct 20, 2009 Housed in 1.8 x 2.6 x 0.55 mm UMLP package, Model FSA800 handles USB data, stereo and mono audio, microphone, and UART data all on common connector port. Unit offers built-in charger detection and 28 V of overvoltage tolerance. Built-in termination resistors eliminate pop noise, while negative swing capability enables audio signals to swing below ground, eliminating need for AC coupling capacitors. Switch is suited for USB port isolation, connector sharing, and signal multiplexing.

Watlow
St. Louis, MO 63146
Oct 15, 2009 Featuring EZ-ZONE® PM and EZ-ZONE RM integrated temperature controllers, PROFIBUS DP facilitates plant design and eliminates hard wiring. System features status LEDs, cycle read/writes up to 135 data points, and acyclic read/write capabilities. With generic station description file editor, users can create customized data exchange packets. Additional features include support for DP-Version 0 and 1 functionalities, 16 or 32 bit formatting, and independent temperature units in °C or °F.

OleumTech Corp.
Irvine, CA 92618
Oct 12, 2009 Offered in DIN rail package with 3.6 x 2.7 in. form factor, WM3000 lets users configure all of its 8 channels as any combination of inputs, outputs, or low-frequency pulse counters for industrial automation and process control applications. It supports Modbus RTU protocol over 2-wire RS-485 bus and can interface with any third-party Modbus master device. Scalable design allows for 247 expansion modules to be multi-dropped to one Modbus master device with RJ45 connector.

Beckhoff Automation LLC
Minneapolis, MN 55337
Oct 06, 2009 Suited for installation outside of control cabinets, EP1258 EtherCAT Box detects digital input signals with temporal resolution of 1 ns directly on machine. This allows reaction times to be shortened, independent of control cycle, while fast events can be detected and processed further without requiring special hardware. Featuring 8 digital inputs, box supports XFC (eXtreme Fast Control) technology in compliance with time stamp method.

Hitex Development Tools
Sunnyvale, CA 94086
Sep 28, 2009 Equipped with un-limited HiTOP debugger, GNU Arm compiler, and professional Tasking compiler as well as applications code, LPC1313-Stick evaluates ARM Cortex-M3 based LPC1300 controllers from NXP. EnergyBench can be executed with different supply voltages and CPU frequencies to get detailed information on power consumption. Access to LPC1313 controller's peripherals is provided via 80-pin connector and can be used with prototype extension boards.

Vaunix Technology Corporation
Haverhill, MA 01835
Sep 10, 2009 Self-powered 4-Port Lab Brick® LPH-204B USB hub powers USB peripherals, such as signal generators and digital attenuators, for applications in production lines, test laboratories, and ATE systems. Hub supports low-, full-, and high-speed peripherals with data transfer rates to 480 Mbps with Vbus regulation of ±2% typical over all specified load conditions. Housed in 3.86 x 2.52 x 1.35 in. cast aluminum enclosure weighing 0.5 lb, hub operates from +12 Vdc in -30 to +55°C temperatures.

ITT Interconnect Solutions
Santa Ana, CA 92705
Sep 08, 2009 Designed for computer data bus applications in satellite communications, 40-position, 1.27 mm pitch, Micro Bus Floating (MBF) connector has mated height of 8 mm. Floating metal spring on housing provides cushioning effect, ensuring contact accuracy between connector and PCB frame. Suited for stacking 2-12 PCB frames, connectors can also be used with high-end computer and medical equipment. Conector is guaranteed for up to 1,000 mating cycles.

VPT, Inc.
Blacksburg, VA 24063
Sep 01, 2009 With up to 200 W output power, VPTHVM-270 Series operates from 270 V bus to step down power to create regulated 28 V bus for avionics power systems. Its 160-500 V input range accommodates MIL-STD-704 input power requirements for avionics as well as other applications, while 2.35 x 1.550 in. footprint conserves space in power system. Operating with up to 91% efficiency over -55 to +100°C range, module comes in 6-sided metal cases and can be used in parallel with up to 5 units.

National Instruments Corp.
Austin, TX 78759-3504
Aug 31, 2009 Along with universal API, NI-XNET hardware platform includes 2 FlexRay interfaces and 12 CAN interfaces designed to help engineers accelerate prototyping, simulation, and testing of next-generation devices and networks. Included software provides signal database editor as well as bus monitor utility. Available in 1- or 2-port versions, interfaces help engineers accelerate simulations by providing onboard processor dedicated to each port to offload intensive tasks.

Digi International
Minnetonka, MN 55343
Aug 14, 2009 Equipped with 4 USB ports, 4 serial ports, and one Ethernet port, AnywhereUSB® TS integrates Realport® USB-over-IP and Realport® Serial-over-IP technology to let users network USB and serial devices with one solution. USB only hub, AnywhereUSB/2, utilizes Realport USB-over-IP technology to enable connection to USB devices anywhere on wired or wireless network. It features 2 USB ports and one Ethernet port. Both solutions may also be used with virtual machine software.

Moxa Inc.
Brea, CA 92821
Jul 31, 2009 Industrial-grade UPort(TM) 200 and 400 series provide true USB 2.0 Hi-Speed 480 Mbps data transmission through each port, even for heavy-load applications. As external plug-and-play hubs, products can be inserted into standard USB port to provide instant peripheral device connectivity. Devices offer 8 kV of ESD contact protection and 15 kV ESD of air protection. For use in harsh conditions and extreme temperatures, UPort 404-T and UPort(TM) 407-T support -40 to +85°C operating range.

Hitex Development Tools
Sunnyvale, CA 94086
Jul 29, 2009 STM32-com is designed for STMicroelectronics' new Cortex-M3-based STM32 Connectivity Line. It includes HiTOP IDE/debugger for flash programming and debugging plus Tasking C-Compiler for Cortex. It also includes application examples for various communication interfaces, such as web server, USB host, and file system. Equipped with STM32F107 microcontroller with 256 KB Flash and 64 KB SRAM, it also combines USB On-The-Go, Ethernet, and CAN2.0B interfaces.

Phihong USA
Fremont, CA 94539
Jul 29, 2009 Utilizing less than 0.03 W of power at no load, 2.75 W PSM03A-050Q features ENERGY STAR Level V efficiency markings and operates at minimum of 63.7% average efficiency. It measures 2.29 x 1.69 x 0.83 in., offers 5 Vdc output, has USB A output connector built into case, weighs 3 oz, and is rated for operation from -10 to +45°C. Featuring cUL/UL, CE, and IEEE1725 safety markings and approvals, charger provides over-voltage protection up to 8.5 Vdc and short-circuit protection.

ADLINK Technology Inc.
Irvine, CA 92618
Jul 15, 2009 Supporting transfer rate of greater than 1.2 MB/sec, IEEE-488.1 and 488.2 compatible USB-3488A enables direct connection of GPIB instruments to laptop computer. It is fully compatible with NI-488.2 software and supports VISA I/O libraries software so that existing GPIB applications can be used without modification. Compact and portable controller measures 3.2 x 2.4 x 1.1 in. and weighs only 180 g. Unit comes with built-in 2 m USB cable.

Murrelektronik, Inc.
Duluth, GA 30096
Jul 06, 2009 Available with Profibus, CanOpen, DeviceNet, EtherCat and EtherNet /IP bus protocols, IMPACT67 compact field bus I/O modules are designed for electrical engineers to maintain digital inputs and outputs. IP67 protected unit comes with predefined inputs and outputs, port-related cutoff and single channel diagnostics via LED. Modules are equipped with field bus group diagnostics to reduce machine outages and localize and rectify faults.

One Stop Systems
Escondido, CA 92029
Jun 10, 2009 Housed in 3U 19 in. rackmount enclosure, Expansion Platform adds up to 4 PCIe and 3 PCI-X add-in boards to servers with limited slot counts. Using Gen 2 host system, unit operates at Gen 2 speeds or 5 Gb/s per lane. Since platform accommodates either x4 or x8 cable connectors, it can operate from 10-40 Gb/s. System includes host adapter and 1 m cable, 300 W power supply, two 5¼ in. drive bays, and one 3½ in. drive bay, as well as 2 USB ports on front panel.

SMSC
Hauppauge, NY 11788
Jun 09, 2009 Targeting automotive applications, 2-port TrueAuto(TM) USB82640 and USB82660 enable users to access navigation data and entertainment content stored on solid state memory cards. Model USB82640 provides 2 downstream USB 2.0 ports plus single SD(TM)/MMC(TM) or Sony MemoryStick(TM) memory card interface, while Model USB82660 provides second SD card interface and is capable of operating up to ambient temperature of 105°C. SDIO interface can be used to add WiFi, Bluetooth®, and GPS connections.