Computer Hardware & Peripherals ->
Computer Accessories ->
Computer & Communication Cables ->
(Showing headlines 1 - 13)
Networking Cable brings Ethernet to analog signal conditioners.
Wixom, MI 48393 7037
Aug 06, 2010
Providing DB25 male to 26-pin female IDC ribbon cable connection, Model 4001-110 interfaces rack of up to 16 3B or 5B modules, providing conditioned voltage signals from analog sensors to Ethernet I/O modules. Converting signal conditioners' outputs to digital data, Ethernet I/O modules can provide Modbus TCP/IP communication to PCs, PLCs, and other distributed control devices. Typical applications include SCADA, process control, and test and measurement systems.
Cable Assemblies offer perpendicular mating capability.
Lisle, IL 60532-1682
Mar 24, 2010
Targeting telecom, datacom, and computer markets, PRIZM(TM) LightTurn(TM) Cable Assemblies use low-profile connectors from US Conec Ltd that mate to Avago Technologies' MicroPOD(TM) 120 Gbps board-mounted parallel optic modules. Perpendicular mating allows for tight spacing of modules and facilitates cable management since modules can be aligned in rows. Mated on top of modules, multi-fiber ribbon cable assemblies also optimize airflow on PCBs.
Silicone Jacketed Ribbon Cables tolerate extreme environments.
Valencia, CA 91355
Jun 03, 2009
Rated for over 10 million cycles in flexing applications, submersible ribbon cables are acid, alcohol, oil, ozone, steam and radiation resistant and have minimum bend radius of 0.4 in. Constructed using Ultra High Flex 28 AWG and tinned copper wire, cables meet NASA rating for space applications and UL-94 vertical flame standard for fire resistance. They operate in temperatures from -65 to +260°C.
Fibre Ribbon Cable accelerates installation time.
Fujikura Europe Ltd, Fibre Optics Division
Chessington, Surrey KT9 2NY, United Kingdom
May 08, 2009
Based on Easy Split bend-insensitive Ribbon Fibre, C-Groove Cable features C-shaped core that remains intact once outer coating is removed, enabling fibres to be removed from open face of C-groove. Four fibre ribbon inside cable can be separated into individual fibres in seconds using de-ribbonizing tool, eliminating need for mass fusion splicers and hot jacket strippers. Once desired fibres have been extracted, outer coating can be re-sealed by pressing cover back over cable.
Custom Ribbon Cables are manufactured using extrusion process.
New England Wire Technologies Corp.
Lisbon, NH 03585
Apr 14, 2009
Ribbon cables are manufactured using extrusion process that allows multiple wires to be placed into flexible flat cable, precisely controlling wire spacing, insulation thickness, and overall cable shape to produce consistent, reliable cable. They are available in variety of conductor sizes and alloys and in plastic insulations such as TPE, PVC, and silicone rubber to meet specific application needs.
Flat Cable Assemblies meet Camera Link® standard.
Valencia, CA 91355
Mar 09, 2009
Designed for industrial motion video and frame grabber applications, Camera Link® Cable Assemblies encapsulate 11 parallel twinax conductors in clear one-piece silicone jacket, forming flat cable less than 3/16 in. thick. Each twinax conductor features finely stranded wires with dual shielding. Measuring 1.5 in. wide, assemblies offer 50 mm bend radius and are finished with metal EMI/ESD protective connectors with quick-release latches.
Camera Link Cable features right angle cable exit.
3M Co., Electronic Products Div.
Austin, TX 78726
Jan 07, 2009
Suited for space-constrained applications, MDR Camera Link Full Configuration Cable allows direct cable drops by virtually eliminating cable bend radius requirements of traditional straight exit products. Cable meets EU RoHS requirements and is labeled in accordance with China RoHS marking standard SJ/T 11364-2006.
Ribbon Cables withstand multiple flex cycle operations.
3M Company / Electronic Products Division
Austin, TX 78769
May 29, 2008
Offering flexible base configuration for camera-to-framegrabber connection in machine vision applications, flexible cables mate to MDR 26-position camera connections. Standard version has straight exit thumbscrew backshells, and bulkhead version (male-female) allows for extension applications or connects to bulkhead panel for feed-through. For limited-space applications, overmolded and right-angle cable drop flexible cable is available.
Cable Assemblies are designed for motion environments.
W. L. Gore & Associates, Inc.
Elkton,, MD 21921
Jan 02, 2007
Constructed to meet demands associated with motion control and vision systems, GORE(TM) FireWire® High Flex Round and Flat Cable Assemblies bend without incurring any bit errors or loss of data. They maintain stable attenuation over flex life. Round cable assemblies are tested to 5 million cycles in rolling flex motions on bend radius of 50 mm, and flat cable assemblies are tested to 20 million cycles in rolling flex motions on bend radius of 20 mm.
Gel-Free Cable uses super-absorbent polymer technology.
Corning Cable Systems
Hickory, NC 28603-0489
Jul 28, 2006
Available in fiber counts of 288, 360, and 432, SST-UltraRibbon(TM) Gel-Free Cable consists of outdoor ribbon cable, in which dry water-blocking materials replace gels previously used. Design eliminates gel-cleaning solvents from workplace and need for cable damming procedures. Cable is fully compliant to ICEA outside plant cable standard and Telcordia GR-20-CORE Issue 2 requirements. It fits in 1.25 in. ID or larger ducts and is available with armored jacket options.
Ribbon Cable Assemblies meet MIL-C-49055B/12 standard.
C & M Corporation
Wauregan, CT 06387 0348
Jun 02, 2006
MacroFlex Series includes Series 10, 12, 25, and 39 with wire gauge ranges from 26-16 in Series 10 down to 30 AWG in Series 12, and pitch ranges from .025-.100 in. With Teflon®-insulated cables, assemblies withstand temperatures from -55 to +200°C and can be used in variety of demanding environments. Applications include board-to-board connections avionics equipment, PCB jumpers, computers, datacom harnesses, test equipment, and medical electronic equipment.
Fiber Ribbon Cable holds up to 1,008 optical fibers.
Superior Essex, Inc.
Franklin, TN 37064
Mar 01, 2006
Offering alternative to central tube cable design, Outside Plant fiber ribbon cable products are available in all-dielectric and armored constructions. They utilize stranded tube design, which can contain up to 12 fiber optic ribbons per tube and 144 optical fibers per tube. Design facilitates separation of optical fibers within cable, as multiple tubes can be combined within product to carry from 288-1,008 total optical fibers.
Fiber Optic Systems target data centers, SANs, and LANs.
New London, CT 06320
Oct 17, 2003 Based on MPO 12-fiber connector technology, Momentum® modular, pre-terminated systems combine ribbon backbone cabling with optical cassettes. They are available with 62.5/125 and standard 50/125 fiber for legacy and low speed applications, as well as laser-enhanced 50/125 and singlemode fiber for extended distance when running high data rate applications such as 10 Gigabit Ethernet and Fibre Channel.
(Showing headlines 1 - 13)
Latest Products in the News
Sustainability Dashboard Tools, LLC - May 16, 2013
Cloud Based to Cut Costs
Vishay Intertechnology, Inc. - May 16, 2013
Vishay Intertechnology Enhances Precision Thin Film Chip Resistor Arrays with Tighter Tolerances and Temperature Coefficients for Automotive and Industrial Applications
KORENIX Technologies - May 16, 2013
Reliable and Stable USB to Serial Solution - Korenix JetCon 1100/1200 Series
KORENIX Technologies - May 16, 2013
Korenix JetBox 8195 Industrial PC with Gigabit and 12-24V Booster PoE for high-speed security & surveillance systems
TraceSecurity - May 16, 2013
TraceSecurity Earns Three Honors in 8th Annual Hot Companies and Best Products Awards Program
Fisnar Inc. - May 16, 2013
Fisnar Free Robot Trial Service
Fireboy-Xintex - May 16, 2013
ABS Approval for Fireboy®-Xintex® Fire Detection Systems
Bunting Magnetics Company - May 15, 2013
Bunting to Show New Products at WasteExpo 2013 in New Orleans
Vecoplan, LLC - May 15, 2013
Vecoplan Commissions Feedstock Preparation System as Part of Waste-to-Biofuels Project for the City of Edmonton
Nim-Cor, Inc. - May 15, 2013
NimCor Offers Two Different Styles of Chucks Used Widely in the Converting Industry
More Products in the News...