Molex Inc.    Lisle, IL 60532-1682
Nov 18, 2009 Designed to meet 10 Gbps data rates, QSFP+ Quad Small Form-factor Pluggable Plus Solution combines EMI shielding cage, passive cable assembly, active cable assembly, optical MTP cable assembly, optical loopback, and 38-circuit SMT iPass(TM) host connector. iPass contact design provides 4 balanced differential channels featuring isolation and up to 250 cycles. Optical cables are constructed with 12-fiber 3.00 mm round cable for data center interconnect applications.

GOEPEL electronics LLC    Austin, TX 78759
Oct 20, 2009 SCANFLEX® 9305-BAC/RS232 Bus Access Cables, when used with multiport module SFX9305, enable test of RS232 interfaces in combination with extended JTAG/Boundary Scan operations. Cables can be plugged into each free port of module, with interface recognized and configured automatically and BAC type/number defined by user. Interface functions contain stepwise handling of protocol layers, including bidirectional data transfer, allowing users to control interface target/identify faults.

W. L. Gore & Associates Cable & Assemblies    Landenberg, PA 19350
Oct 19, 2009 Fully compliant with SFF-8431 Revision 4.1 specification, 10 meter SFP+ Copper Cable Assembly can go 3-5 m longer than other passive options. Product uses GORE(TM) EYE-OPENER+® Conductor Technology and low-loss expanded PTFE cable dielectric, which balances waveform distortion penalty and voltage modulation amplitude parameters to achieve results within specification limits set forth by SFF-8431 committee. dWDP and VMA loss are 5.60 dBe and 3.95 dBe, respectively.

Belden    Richmond, IN 47375
Oct 07, 2009 To ensure optimal performance in extreme or mission-critical environments, Industrial Ethernet Cordsets and Patch Cords have individual insulated conductors bonded together along longitudinal axis for uniform conductor-to-conductor spacing. Cables are also chemical- and temperature-resistant and incorporate rugged RJ45 or over-molded M12, IP67-rated industrial connectors.

HARTING, Inc. Of North America    Elgin, IL 60123 5538
Jul 21, 2009 Comprised of outdoor rated fiber optic cable pre-assembled with outdoor rated PushPull LC connector, LC fiber optic cable assemblies achieve low loss over long distances with high data-carrying capacity. They feature 2-fiber multimode, wavelength of 850 and 1,310 Nm, and are immune to electromagnetic interference (EMI). IP65/IP67 rated, ready-to-install cable assemblies are offered in various lengths, as well as in single-ended versions.

Corning Cable Systems    Hickory, NC 28603-0489
Jun 29, 2009 Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

Optec Technology Limited    Kowloon   Hong Kong (prc)
Jun 24, 2009 Suited for demanding applications such as fiber-to-the-desk (FTTD), broadcasting, FTTx, and harsh environment networks, armored cable assemblies have stainless steel metal tubing within cable coating to protect fiber inside cable. Protective metal tubing also prevents damage from rodent bites. Product is available with choice of fiber connectors including LC, FC, SC, ST, MTRJ, and E2000, as well as type of polish including APC, UPC, and PC.

Wireworks Corp.    Hillside, NJ 07205
Jun 10, 2009 Available as single-channel cords and multichannel assemblies, TacCat products provide tactical CAT5e Ethernet interconnection in heavy-duty construction for on-the-road Ethernet and digital audio applications. Cords are available in standard lengths from 25-250 ft with Neutrik's etherCON data connectors or traditional RJ45 Ethernet connectors. TacCat multichannel assemblies, available with same choice of connectors, have 4 individual CAT5e cables in one outer jacket.

Meritec Div., Associated Enterprises    Painesville, OH 44077
May 20, 2009 Available in standard configurations in 30-24 AWG, Low Smoke Zero Halogen (LSZH) cable is used in Mini-SAS/SAS/SATA/InfiniBand®/and Ethernet CX4 external cable assemblies. Suited for green data-center and military applications, cable assemblies using LSZH cable meet or exceed electrical performance requirements of SAS 2.0 specification. PVC jacketed cable is also available as option.

RIA Connect    Tinton Falls, NJ 07112
May 14, 2009 Whether outdoors or exposed to chemicals and vibration found in factory settings, CAT 6A compliant X|Synergy provides IP67 level connection system between network cable and PCB. System utilizes edge-connector technology, which allows jack to become part of installation process, while providing self-alignment. Supporting gigabit Ethernet and 10 Gbit Ethernet, jack modules plug into edge-connector which resides on PCB, and is shrouded by metal shield for EMI protection.

Alpha Wire Corp.    Elizabeth, NJ 07207 0711
May 14, 2009 Low-Smoke Zero-Halogen (LSZH) Cable meets requirements of IEC 60332-1 for flammability, IEC 60754-1 and IEC 60754-2 for acid-gas generation, and IEC 61034-2 for smoke emission. Utilizing stranded copper conductors for flexibility, they are offered in unshielded, overall foil shielded, or individually foil shielded pairs. Cables are available with 300 V rating, meeting UL Type CM and CSA Type CMG FT4 standards, and operate in temperatures from -20 to +75°C.

Corning Cable Systems    Hickory, NC 28603-0489
May 01, 2009 Pretium® Low-Loss OM3 Jumpers with ultra-bend performance are high-bandwidth, laser-optimized cable assemblies featuring Corning® ClearCurve® multimode fiber, which confine modes of light to within fiber's core. Products are able to accommodate minimum bend radius of 8-10 mm, on 1.6-2.0 mm cable, with minimal bend-induced attenuation loss. They are suited for enterprise LAN and datacenter applications.

L-Com, Inc.    North Andover, MA 01845
Apr 06, 2009 Featuring fully shielded design, CAESA Series provides protection from EMI/RFI and supports speeds up to 6 Gbps. Assemblies include 2 eSATA connectors and 26 AWG cable. With 1 latching SATA II connector and 1 eSATA connector, CAESA2 Series connects eSATA external drives/enclosures to SATA II enabled systems. Assemblies come in lengths of .5, 1, and 2 meters as well as custom lengths.

L-Com, Inc.    North Andover, MA 01845
Mar 20, 2009 Suited for industrial computing applications in harsh environments, WP946PXX series features assemblies with one IP67 male to one standard 6 position male connector. Another version features one IP67 Female 6 position connector to standard 6 position male connector. Able to be utilized in applications where dust and moisture are prevalent, products can be used to connect to enclosures and panels as well as directly to peripherals or PCs.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Feb 12, 2009 GORE(TM) Low-Profile Copper Cable provides direct attach assembly for HPC and networking environments using 10 GbE, FCoE, or 8 Gigabit Fiber Channel. Cable is ideal for 0.5 m to 3 m assemblies, while using 2.10 mm round profile cable up to 2 m and 2.80 mm round profile cable for 3 m. With IU performance under 0.4, cable is suited for data center applications with high-density port-count interconnects of 3 m or less.

Turck USA    Minneapolis, MN 55441
Feb 12, 2009 Including IEC 11801:2002 Cat 5 and TIA 568B: 2001 Cat 5e compliant cable, 4-wire PROFINET cordsets connect to BL67 Ethernet gateways for PROFINET, which can be connected to up to 32 I/O modules per gateway. Available with color-coded field wireables to convert hard wiring to quick disconnect, units are offered with M12 Ethernet D-coded and RJ45 connector options.

FCI    Etters, PA 17319
Feb 10, 2009 Designed to address storage industry demands for high-speed serial I/O interfaces, 26-position Mini-Multilane Cable Assemblies enable Mini-SAS or Mini-SATA 4x external cable links. Units meet requirements for 1.5-6.0 Gb/s per channel, as well as future bandwidth demands. Assemblies also satisfy applicable requirements of INCITS T10 SAS 1.1 or SATA-IO Serial ATA specifications and conform to mechanical requirements described in associated SFF-8086 and SFF-8088 documents.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 02, 2009 Available in either shielded or unshielded versions, Ethernet cable assemblies use industrial-grade PVC-jacketed cable for rugged performance. They are offered with either IP20 or IP67 sealing, suited for EtherNet/IP, DeviceNet, and ControlNet applications. Rated for 250 V, category 5e cable assemblies are available in standard lengths from 2-20 m, and meet UL AWM20276 and UL VW-1.

FCI    Versailles Cedex   France
Jan 13, 2009 Meeting 10GBase-CX4 Ethernet and Infiniband® industry standards, DensiShield(TM) copper I/O solution has 4-channel capability and delivers 40 Gbps aggregate bandwidth. Its 10 Gbps per channel differential performance can be achieved at 6 m or less utilizing 30 AWG cable, at 8 m or less utilizing 28 AWG cable, and 10 m or less utilizing 26 AWG cable. Solution can accommodate card slot pitch as low as 15 mm and achieve port-to-port centerline of 12.5 mm along card edge.

Molex Inc.    Lisle, IL 60532-1682
Jan 08, 2009 Based on DDR specifications by InfiniBand Technology group, LaneLink(TM) DDR InfiniBand Cable Assemblies provide system speeds up to 40 Gbps over 8 differential cable pairs. PCB receptacle, with die-cast frame featuring unitary latch posts and screw attachment to PCB, provides isolation of cable loads from SMT solder tails. Multiple latching versions, including squeeze, lanyard, and jackscrew are available. Applications include SAN switches, routers, server storage racks, and RAID devices.