General Cable    Highland Heights, KY 41076
Feb 01, 2013 Part of 17 FREE™ line, GenSPEED® 10 MTP™ Cat 6A 10 Gig Type CMR Cables contain Mosaic Crossblock™ technology, providing unshielded twisted pair cable that performs like shielded cable but with green properties. Cables do not contain any chlorine, fluorine, bromine, or iodine. ETL listed and UL verified, cables are suited for network infrastructure and data centers within enterprise, healthcare, and education markets where data must be moved quickly and communications delivered in real-time.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 18, 2012 Suitable for panel-to-panel applications and harsh environments, Eye Speed® RCH Series comes in 1, 2, and 3 m cable lengths of 32 AWG low skew pair cable with 100 Ω differential pair signal routing, 28 AWG cable for power lines, and 1.00 in. bend radius. Cable assembly mates with right angle PCB connector and cage on .0315 in. pitch. Featuring Edge Rate™ metal-to-metal contact system for signal integrity, Eye Speed supports SAS, SATA, Fibre Channel, Ethernet, PCIe®, and InfiniBand™ protocols.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 04, 2012 Providing HyperTransport™ HT 3.1 performance, Eye Speed® HDLSP Series boasts 48 signal pairs in 28 x 14 mm panel opening. System is designed to be stacked and mated with right angle PCB connector and cage. With .025 in. pitch design, system fits full height of PCIe card to support 3D-Torus/Mesh HT NICs and switches. It is available in 1 m and 2 m lengths of 32 AWG low skew pair cable with performance up to 6.44 GHz and 2.56 GHz, respectively, at 7 dB insertion loss.

Belden CDT Inc.    St. Louis, MO 63105
Jun 27, 2012 Supporting data rates up to 10 Gbps, Lumberg Automation Gigabit Ethernet Connectors have special shielding that covers individual wire pairs, ensuring reliable data transmission even in presence of strong electromagnetic fields. Units support M12 or RJ45 connection technology and are available in both field-attachable and premolded versions. With IP67 rating and operating temperature of -30 to +90°C, connectors are suited for harsh industrial environments.

FCI Electronics    Etters, PA 17319 9769
May 21, 2012 Available in both copper and fiber optic options, XLerate(TM) Cabling Solutions support aggregated bandwidths from 10-120 Gbps in various industry standard-compliant interfaces, making them suitable for data center, high-performance computing, and switching applications. Cabling is plug-and-play, with active optical cables providing closed optical system for worker safety as well as to protect cable from dust contamination.

L-Com, Inc.    North Andover, MA 01845
Jan 10, 2012 Featuring type A female bulkhead connector on one end, USB 3.0 Cable Assemblies install on panels or chassis and provide access to hard-to-reach or secure USB 3.0 ports. Multi-layered PCB in bulkhead maintains USB 3.0 speed and performance. ECF504 style bulkhead mounts to virtually any panel thickness via electrically grounded flange.

TE Connectivity Ltd.    Berwyn, PA 19312
Dec 02, 2011 Consisting of various cable assembly and PCB header types in standard industrial circular format, Industrial Ethernet M12 Connector System has 8-contact system that makes it suitable for high-speed data applications and power-plus-Ethernet applications. Future-proof interface meets requirements of 100 Mbps and 1 Gbps systems as well as expected 10 Gbps needed in future. Typical applications include industrial automation, machine vision, and industrial control.

L-Com, Inc.    North Andover, MA 01845
Sep 06, 2011 DVI-D single link and dual link right-angle cable assemblies allow DVI-D connection to be made even in small spaces, such as behind TV or monitor. Stocked in lengths from as little as 1 ft to as much as 5 m, products feature right-angle connector on one end and standard DVI-D connector on other end.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jul 11, 2011 Available in Male/Male, Male/Female, and Female/Female configurations, Custom Adapter Kits contain housing, connectors, screw hardware, and jumpers. Kits solve cable and peripheral incompatibility problems and are particularly useful when existing data cable runs through walls and over partitions. By reconfiguration of pin/signal connections, cables can be adapted for new use.

Belden    Richmond, IN 47375
Nov 18, 2010 Shielded DataTuff® cables 7958A and 7957A are suited for use in listed motor control centers and switch gear in EMI environments. AWM rating allows usage of units on or within listed cabinet or machine. Features include 24 AWG Bonded-Pair solid bare copper conductors, polyolefin insulation, 24 AWG stranded tinned copper drain wire, and industrial-grade oil- and sunlight-resistant PVC jacket.

TE Connectivity Ltd.    Berwyn, PA 19312
Aug 17, 2010 As alternatives to fiber optic transceivers and MPO cables in 10Gb Ethernet, 8GB Fiber Channel, and InfiniBand applications, SFP+ active direct-attach copper cable assemblies offer signal amplification and equalization as well as Rx LOS and Tx Disable functionality. They consume 500 mW per cable end and come in lengths from 0.5-15 m. Meeting MSA specification for signal integrity performance, cable come in wire gages from 24-30 AWG and incorporate 360° cable braid-crimp termination.

Acromag, Inc.    Wixom, MI 48393 7037
Aug 06, 2010 Providing DB25 male to 26-pin female IDC ribbon cable connection, Model 4001-110 interfaces rack of up to 16 3B or 5B modules, providing conditioned voltage signals from analog sensors to Ethernet I/O modules. Converting signal conditioners' outputs to digital data, Ethernet I/O modules can provide Modbus TCP/IP communication to PCs, PLCs, and other distributed control devices. Typical applications include SCADA, process control, and test and measurement systems.

Siemon Co., The    Watertown, CT 06795
Jul 09, 2010 Intended for 40 Gbps applications, Moray(TM) 4-lane QSFP+ Active Optical Cabling Assemblies incorporate 780 mW transceiver, which utilizes Silicon CMOS Photonics technology that has integrated opto-electronic chip with directly attached fiber and micro-packaged laser. Unlike optics that utilize VCSELs and multi-mode fiber for short connections, Moray's single chip transceivers support distances from 1-4,000 m for inter- and intra-building applications.

TURCK, Inc.    Plymouth, MN 55441
Jun 17, 2010 Available with 4 or 8 conductors (2 and 4 pair counts), Gigabit capable Cat 5e Ethernet cables incorporate flexlife® high flex cable jackets. Jacket material is resistant to abrasion, crushing forces and chemicals, and is suitable for harsh duty environments. Cables can be specified with straight or right-angle RJ45 or M12 connectors to accommodate diverse application requirements.

Samtec, Inc.    New Albany, IN 47151 1147
Jun 10, 2010 AccliMate(TM) Sealed Rectangular Ethernet Cable Plug and Receptacle, designed for industrial and other harsh environments, have silicon seal rated IP68 and rectangular design that accommodates smaller and low-profile applications. Offered in 1- or 2-port designs, AccliMate Rectangular Ethernet Panel Mount Sockets (RPBE Series) meet CAT5e, CAT, and CAT3 specifications. Cable Plug (RCE Series) is available double-ended, where both ends are sealed, or with blunt cut, where one end is sealed.

Northwire, Inc.    Osceola, WI 54020
Apr 20, 2010 UL- and WTTC-approved Resilience(TM) Cables are designed to support cable needs in nacelle of wind turbine for low-voltage control, data, communication, and exposed-run power applications. Rated to NFPA 79 (12.2.2) for constant flex and high performance, oil-resistant and FT4 flame-rated products exceed proprietary cold-bend test at temperatures down to -40°C and are available in AWM 300 and 600 V as well as WTTC-rated 1,000 V standard configurations from 6-18 AWG.

Molex Inc.    Lisle, IL 60532-1682
Mar 24, 2010 Targeting telecom, datacom, and computer markets, PRIZM(TM) LightTurn(TM) Cable Assemblies use low-profile connectors from US Conec Ltd that mate to Avago Technologies' MicroPOD(TM) 120 Gbps board-mounted parallel optic modules. Perpendicular mating allows for tight spacing of modules and facilitates cable management since modules can be aligned in rows. Mated on top of modules, multi-fiber ribbon cable assemblies also optimize airflow on PCBs.

Atlona Technologies    San Jose, CA 95131
Feb 22, 2010 Model AT13029 is DisplayPort female to Mini DisplayPort Male adapter that connects Apple computers and monitors to Dell or HP computers/monitors and supports resolutions of 3,840 x 2,160. Designed for Apple 24 in. LED displays, AT13031-2 is 6 ft Mini DisplayPort male to Mini DisplayPort female extension cable. Model AT13032-2 six ft Mini DisplayPort male to Mini DisplayPort male cable extends distance of signals to Apple iMac 27 in. LED display at resolutions up to 3,840 x 2,160.

Stewart Connector    Glen Rock, PA 17327
Jan 27, 2010 Designed to promote optimal port density in space-constrained telecom and premise wiring applications, MRJ21® Cable Assemblies simultaneously support VoIP, PoE, and GbE while offering ability to connect 24 twisted pairs with one connection. Category 5e devices offer choice of straight, 45° angle, or multiple RJ45 connectors. Board-mount receptacle features board lock design for PCB strain relief, while cable assemblies provide offset jackscrews to ensure positive latching.

Holocom, Inc.    San Diego, CA 92121
Jan 14, 2010 Exterior, building-mounted Secure Enclosure SEC-WM-EXT1-H1 interfaces between mobile military tactical communications platforms and building voice/data networks. Interface allows real-time tactical communications to feed into building's office, conference room, VTC room, or operations center from tactical communications platform parked outside building. It also ensures tactical communications cable feed without compromising environmental protection to cable interface.