San-Tron, Inc.    Ipswich, MA 01938
May 21, 2013 Serving PIM-sensitive environments though 6 GHz and military/avionics environments through 20 GHz, SRX™ cable assemblies combine eSeries coaxial connectors with SRX coaxial cables. Combination of PTFE with Rexolite™ promotes holding capability, while solder step in manufacturing lends to stability. Deployment scenarios include in-cabinet, plenum-rated, short runs and jumper applications, long-haul cable runs, indoor use, outdoor use, and riser, with several interconnect options.

Samtec, Inc.    New Albany, IN 47151 1147
Feb 28, 2013 Combining coax cable assembly and board level connector, FCF8/FCS8 System offers choice of 10, 20, or 30 total contacts on .0315 in. pitch, with outside contacts grounded to outer body shielding. Cable assembly features 38 AWG micro discrete wire coax cable, available in any length >3.00 in. Positive latching system, metal shielding for EMI protection, and standard weld tabs on surface mount connector make system suitable for harsh environments.

Mini-Circuits    Brooklyn, NY 11235
Feb 27, 2013 Featuring male N-type connector, Quick Lock QBLxSMQ-NM+ Test Cable Assemblies fill wide range of N-to-SMA connection needs from DC to 18 GHz, with max power rating of 270 W at 1 GHz and 47 W at 18 GHz. Assemblies offer optimal electrical performance through 20,000 tough Flex Test™ cycles and 20,000 Quick Lock push on/pull off connection cycles. Available in lengths of 2, 3, or 6 ft as well as 1 m, cables are suited for use with 50 Ω N-type network analyzers.

General Cable    Highland Heights, KY 41076
Feb 01, 2013 Part of 17 FREE™ line, GenSPEED® 10 MTP™ Cat 6A 10 Gig Type CMR Cables contain Mosaic Crossblock™ technology, providing unshielded twisted pair cable that performs like shielded cable but with green properties. Cables do not contain any chlorine, fluorine, bromine, or iodine. ETL listed and UL verified, cables are suited for network infrastructure and data centers within enterprise, healthcare, and education markets where data must be moved quickly and communications delivered in real-time.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 18, 2012 Suitable for panel-to-panel applications and harsh environments, Eye Speed® RCH Series comes in 1, 2, and 3 m cable lengths of 32 AWG low skew pair cable with 100 Ω differential pair signal routing, 28 AWG cable for power lines, and 1.00 in. bend radius. Cable assembly mates with right angle PCB connector and cage on .0315 in. pitch. Featuring Edge Rate™ metal-to-metal contact system for signal integrity, Eye Speed supports SAS, SATA, Fibre Channel, Ethernet, PCIe®, and InfiniBand™ protocols.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 04, 2012 Providing HyperTransport™ HT 3.1 performance, Eye Speed® HDLSP Series boasts 48 signal pairs in 28 x 14 mm panel opening. System is designed to be stacked and mated with right angle PCB connector and cage. With .025 in. pitch design, system fits full height of PCIe card to support 3D-Torus/Mesh HT NICs and switches. It is available in 1 m and 2 m lengths of 32 AWG low skew pair cable with performance up to 6.44 GHz and 2.56 GHz, respectively, at 7 dB insertion loss.

L-Com, Inc.    North Andover, MA 01845
Aug 17, 2012 Stocked in 6 lengths, HDMI audio/video (A/V) cables with Ethernet are available in plastic armor with 1,000 psi crush resistance or metal armor with 1,500 psi crush resistance. Products feature 30 µin. gold-plated contacts and double shielding to protect sensitive audio and video signals from interference. Areas of use include those that present potential for exposure to excessive force, such as military, security, and industrial environment applications.

AutomationDirect.com    Cumming, GA 30040-9905
Jul 30, 2012 Designed with impedances specific for RS-232/422 and RS-485 communication applications in industrial environments, Data Cables feature 24 AWG twisted pair tinned copper conductors in 1, 2, or 3-pair color coded constructions. Cables have polyethylene conductor insulation and gray PVC jacket. Protection from radiated or conducted EMI is provided by combination shields consisting of overall foil shield layer with drain wire and woven braid shield layer.

Pasternack Limited    Irvine, CA 92614
Jul 20, 2012 Available in ½ in. flexible and superflexible versions, Corrugated Coaxial Cable Jumpers can be ordered in standard and custom lengths with 7/16 DIN and Type N connectors to meet requirements. Assemblies have injection molded boot on each connector, which provides added strain relief and weather sealing. Providing years of optimal PIM and VSWR performance, assemblies are suited for tower top jumpers, shelter/cabinet jumpers, antenna feed lines, and 2-way land mobile radio installations.

Belden CDT Inc.    St. Louis, MO 63105
Jul 06, 2012 Available on FOUNDATION Fieldbus/PROFIBUS PA, PROFIBUS DP, ControlNet Quad Shielded Coax, and Blue Hose Cable, Continuous Aluminum Armor Cladding eliminates need for conduit. Applied as continuous strip of aluminum, which is wrapped around cable and welded at seam, armor is MC-rated for crush resistance, impervious to fluid ingress, and suitable for installation in harsh and hazardous locations. Corrugation permits bending without kinking.

Belden CDT Inc.    St. Louis, MO 63105
Jun 27, 2012 Supporting data rates up to 10 Gbps, Lumberg Automation Gigabit Ethernet Connectors have special shielding that covers individual wire pairs, ensuring reliable data transmission even in presence of strong electromagnetic fields. Units support M12 or RJ45 connection technology and are available in both field-attachable and premolded versions. With IP67 rating and operating temperature of -30 to +90°C, connectors are suited for harsh industrial environments.

Amphenol Connex    Moorpark, CA 93021
Jun 25, 2012 Stocked in standard lengths from 3-48 in., Pre-Configured Type N RF Cable Assemblies are suited for outdoor wireless and broadband applications requiring stable performance up to 11 GHz. Units feature Nexcote plated Type N male connectors terminated to industry standard coaxial cable types. Flexible and low-loss cable types are available. For high-frequency applications, beyond 6 GHz, conformable semi-rigid cable options are also offered.

FCI Electronics    Etters, PA 17319 9769
May 21, 2012 Available in both copper and fiber optic options, XLerate(TM) Cabling Solutions support aggregated bandwidths from 10-120 Gbps in various industry standard-compliant interfaces, making them suitable for data center, high-performance computing, and switching applications. Cabling is plug-and-play, with active optical cables providing closed optical system for worker safety as well as to protect cable from dust contamination.

RF Industries    San Diego, CA 92126 4202
May 11, 2012 Suited for wireless carriers updating their networks to 4G technologies, WiMAX, LTE, etc., OptiFlex(TM) hybrid cabling solutions come in deployment lengths up to 550 ft with less than 10% voltage drop (based on radio power up to 950 W). Coax, multiple fiber, Ethernet, and power cables are bundled within rugged UV-, heat-, and moisture-resistant PVC outer jacket that can withstand harsh weather conditions or direct burial. Each custom, application-specific solution arrives pre-terminated.

RedMere Technology Ltd.    Co. Dublin   Ireland
Apr 10, 2012 Housed inside connector of thin HDMI eco-friendly cables, PRE169x Series achieves data rates of 3.4 Gbps per channel up to 20 m in length. Modules support 4K2K and 3D rates as well as 1440p DTV resolution, 16-bit color depth, and 120 Hz refresh rates. Embedded technology provides active equalization functionality without requiring external power source, compensating for signal attenuation on differential TMDS data inputs.

Leviton Commercial Networks Division    Bothell, WA 98021
Feb 08, 2012 Supporting video applications over distances up to 100 ft, Enhanced Multimedia Outlet System Modules include 3 types: VGA, RCA composite video and stereo audio, and RCA component video. Modules provide point-to-point connections over twisted pair cable, for connection of everything from PC monitors to DVD players. Modules offer industry-standard 110-punchdown termination and give installers ability to cut cable lengths in field.

Crystek Corp.    Fort Myers, FL 33913
Feb 07, 2012 Operating from DC to 26.5 GHz, CCSMA26.5-MM-086 Cable Assemblies provide attenuation value of 1.40 dB/ft at 26.5 GHz, and offer shielding effectiveness greater than 100 dB with operating temperature of -40 to +85°C. Units are constructed with silver-plated copper wire conductor, tin-soaked copper outer braid, PTFE dielectric, and stainless steel SMA connectors with gold-plated brass center pin. Available in 3-12 in. lengths with 0.086 in. OD, cables have minimum single bend radius of 0.125 in.

L-Com, Inc.    North Andover, MA 01845
Jan 10, 2012 Featuring type A female bulkhead connector on one end, USB 3.0 Cable Assemblies install on panels or chassis and provide access to hard-to-reach or secure USB 3.0 ports. Multi-layered PCB in bulkhead maintains USB 3.0 speed and performance. ECF504 style bulkhead mounts to virtually any panel thickness via electrically grounded flange.

TE Connectivity Ltd.    Berwyn, PA 19312
Dec 02, 2011 Consisting of various cable assembly and PCB header types in standard industrial circular format, Industrial Ethernet M12 Connector System has 8-contact system that makes it suitable for high-speed data applications and power-plus-Ethernet applications. Future-proof interface meets requirements of 100 Mbps and 1 Gbps systems as well as expected 10 Gbps needed in future. Typical applications include industrial automation, machine vision, and industrial control.

L-Com, Inc.    North Andover, MA 01845
Sep 06, 2011 DVI-D single link and dual link right-angle cable assemblies allow DVI-D connection to be made even in small spaces, such as behind TV or monitor. Stocked in lengths from as little as 1 ft to as much as 5 m, products feature right-angle connector on one end and standard DVI-D connector on other end.