Hitex Development Tools
Sunnyvale, CA 94086
Jul 24, 2009 Suited for end-of-line integration into production environments, SpeedFlash-XC erases and programs Flash, verifies Flash content, and if necessary protects Flash on products utilizing Infineon 16-bit microcontroller-based design. System connects up to 8 probes to needle bed production equipment via JTAG or DAP, and obtains production data by connecting probes to production computer via USB. System supports complete family of Infineon XC66/XC2000/XE166 microcontroller derivatives.

GAO Embedded Inc.
Toronto 12345  Canada
Jul 10, 2009 Offering 48 pin ZiF socket with universal pin-driver, Model VP58B identifies manufacture and type of EPROMs, TTL/CMOS logic ICs, and dynamic or static random access memory devices. Universal programmer supports 1.5 V low voltage devices, manages 16- and 32-bit word split, conducts device insertion and proof-pin-contact check, and requires no external adapter. Unit also features auto-run mode that starts programming upon detection of chip insertion.

GAO Tek Inc.
Toronto M1B2K4  Canada
Apr 28, 2009 Designed to meet various needs of device programming and IC testing, Model GAOVP480 features test vector capability, multi-array fuse map editor, device insertion and poor-pin-contact check. Portable unit automatically identifies TTL/CMOS logic IC, manufacturer, and type of programmable read-only memory.

GAO Tek Inc.
Toronto M1B2K4  Canada
Apr 14, 2009 Supporting more than 6,000 and 8,000 devices, GAOVP280 and GAOVP380 universal programmers are capable of handling devices such as PROM, PLD, flash microcontrollers, as well as serial and parallel memory. They feature 48-pin ZIF socket and support 8- to 48-pin DIP package devices.

SMH Technologies
Chions   Italy
Nov 03, 2008 Able to integrate with all in-circuit and functional test systems (ATEs), FlashRunner FR01AT0 is controllable via opto-isolated LAN, RS-232, or parallel control lines. Relay circuitry allows each ISP line to be independently disconnected from target system, routing I/O lines coming from ATE system to target system instead, while power voltage and current monitor performs constant checks throughout entire programming cycle. Programming algorithms are as fast as memory technology limit.

GAO Tek Inc.
Toronto M1B2K4  Canada
Sep 24, 2007 Supporting more than 6,000 and 8,000 devices, respectively, Models VP280 and VP380 are capable of handling devices such as PROM, PLD, flash microcontrollers, serial and parallel memory. They are also designed for IC testing, including TTL 74 series, CMOS Logic IC, plus DRAM and SRAM memory devices. Units interface with any laptop, PC, PS/2, or compatibles through USB port. Auto-run mode starts programming automatically upon detection of chip insertion.

Atmel Corp.
San Jose, CA 95131
Jun 05, 2007 Model AT88SC-DK1 provides development kit for CryptoMemory® AT88SCxxxxC series cryptographic memories, covering EEPROM densities from 1-256 Kbits. Included library eliminates need for developers to understand cryptographic processes and algorithms by completely implementing host cryptographic operations required for secure communication. Also included, daughter board adapts CryptoMemory to any existing embedded development environment with 2-wire interface.

Data I/O Corporation
Redmond, WA 98073-9746
Oct 18, 2006 Configured for and mounted directly onto Fuji NXT placement machine, ProLINE-RoadRunner(TM) programs flash memory and microcontroller devices and presents them to pick-point of Fuji NXT machine for placement onto circuit board. In-line automated programming feeder minimizes inventory cost while promoting quality standards required in lean and Six Sigma environments with its Just-in-Time programming capability.

Actel Corp.
Mountain View, CA 94043 4655
Sep 28, 2006 Silicon Sculptor 3 field-programmable gate array (FPGA) programming tool features high-speed USB 2.0 interface allowing connection of up to 12 programmers to single PC. Leveraging antifuse-based Axcelerator FPGA device, unit offers concurrent programming of highly dense parts. Device supports standard and ARM-enabled versions of ProASIC3 family and Actel Fusion Programmable System Chips.

Data I/O Corporation
Redmond, WA 98073-9746
Oct 21, 2005 Designed for OEM/ODM or programming centers producing small or large batches in high volumes, offline Model PS588 supports Windows XP(TM) and can accommodate up to 48 programming sites from FlashCORE(TM) line, or 12 Universal Optima programmers, to address any device mix. Auto Teach feature automatically finds center of device, facilitating process of setting precision placement of new device package.

Data I/O Corporation
Redmond, WA 98073-9746
Dec 17, 2004 Flexible, modular ImageWriterâ„¢ enables device programming on any board inside test fixture, helping electronics manufacturers manage production with multiple product configurations for single target board. It is based on open architecture that enables seamless integration with automated test and manufacturing systems and facilitates programming of devices already mounted on circuit board. Product can be controlled directly via ATE signal or from any process control software.

B & K Precision Corp.
Yorba Linda, CA 92887
Jul 30, 2004 Universal Device Programmer, Model 866 comes with 48-pin ZIF socket, which eliminates need of adapter for any DIP device up to 48 pins. Buffer features include erase, random data fill, fill block, copy block, move block, swap block, buffer print, find text, replace text, 8-bit and 16-bit view modes, go to address, and checksum calculator. Model 866 is suited for anyone utilizing portable computer to test, repair, program, or re-program electronic device using memory IC.

Data I/O Corporation
Redmond, WA 98073-9746
Aug 18, 2003 Model PS300FC, PS300, PS200, and PP100 automated programming systems are available with TaskLink® v5.0 and AH400 v5.0. TaskLink® v5.0 integrates programming operation throughout engineering, NPI, and manufacturing processes and supports programmable NAND Flash and microcontroller devices. AH400 v5.0 incorporates features such as machine and tape-out speed increases, serialization, and SPC reporting. Programming systems utilize FlashCORE programming architecture.

Synario Design Automation Div., Data I/O Corp.
Redmond, WA 98073 9746
Dec 04, 2002 Configured for high-volume, tape-to-tape device programming, PS Infinityâ„¢ Flash programming system tests, programs, and verifies up to 5000 devices per hour. With FlashCORE architecture, system incorporates automated inline, automated offline, and manual programmers. Bundled with high speed handler, unit has 2 configurations that can be implemented to program up to 3000 or 5000 devices per hour.

Synario Design Automation Div., Data I/O Corp.
Redmond, WA 98073 9746
Oct 14, 2002 Universal, multi-socket ProWriterâ„¢ supports gang and set programming for wide range of device types, with support for programmable logic, memory devices, and microcontrollers. Sites can be linked using standard parallel cables to provide up to 48 programming sites, all controlled from one computer. Hands Free feature allows programming to start as soon as device has been inserted into socket and locked into position.

B & K Precision Corp.
Placentia, CA 92870
Oct 01, 2002 PC Compatible Model 844A has 3,628 device library and offers 40-pin DIP Zero Insertion Force Socket (both 300 and 600 mil). It also provides 1.8 V low-voltage device compatibility and Windows control program with pull-down menus. Able to perform Read, Blank Check, Program, Verify, and Erase commands, Model 844A also includes Buffer features such as Random Data Fill, Copy/Move/Swap Block, Buffer print, Find/Replace Text, and 8- and 16-Bit view modes.

Synario Design Automation Div., Data I/O Corp.
Redmond, WA 98073 9746
Sep 30, 2002 Series P300FCâ„¢ automated programming system features FlashCOREâ„¢ technology. It is designed to program high density Flash Memory devices at near theoretical minimum times. System supports standard 4-socket adapters used by ProLINE-RoadRunnerâ„¢ and FlashPAKâ„¢ programmers. It brings benefits of network control and advanced programming architecture to automated Flash programming environments, assuring that programming is current, secure, traceable, and failsafe.

Synario Design Automation Div., Data I/O Corp.
Redmond, WA 98073 9746
Sep 30, 2002 ProLINE-RoadRunnerâ„¢ with Variable Capacity Option removes unprogrammed Flash memory devices from tape, uses FlashCOREâ„¢ archtiecture to program up to 4 devices in parallel, then delivers programmed parts to pick-up point of placement machine. It is available in 1, 2, and 3 site derivative versions and for Universal, Siemens, Fuji, and Assembleon SMT equipment. Derivative versions are field expandable.

AC Technology Corp.
Uxbridge, MA 01569 2001
Apr 04, 2002 Electronic Programming Module (EPM) System consists of memory chip that plugs into front of SC Series drive and hand-held EPM Programmer. Programming changes can be made from drive's front keypad, PC, or by plugging drive's EPM into EPM Programmer. Drive profiles can be copied from EPM into Programmer memory. Using EPM Programmer's backlit 16-character LCD display, operator can label and store up to 30 files for later review, editing, or transfer.

B & K Precision Corp.
Placentia, CA 92870
Mar 26, 2002 Model 869 programs, tests, repairs, or re-programs any electronic device using memory IC either connected to computer, or in field without computer. Universal Stand Alone Device programmer has 4,322 device library, which supports PROMs, EPROMs, PLDs, and Microcontrollers. Test capabilities include IC test for TTL and CMOS Logic ICs and Device Insertion Tests. Windows-compatible software interface has pull-down menus and pop-up dialogue boxes.