Molex Inc.
Lisle, IL 60532-1682
Nov 18, 2009 Designed to meet 10 Gbps data rates, QSFP+ Quad Small Form-factor Pluggable Plus Solution combines EMI shielding cage, passive cable assembly, active cable assembly, optical MTP cable assembly, optical loopback, and 38-circuit SMT iPass(TM) host connector. iPass contact design provides 4 balanced differential channels featuring isolation and up to 250 cycles. Optical cables are constructed with 12-fiber 3.00 mm round cable for data center interconnect applications.

GOEPEL electronics LLC
Austin, TX 78759
Oct 20, 2009 SCANFLEX® 9305-BAC/RS232 Bus Access Cables, when used with multiport module SFX9305, enable test of RS232 interfaces in combination with extended JTAG/Boundary Scan operations. Cables can be plugged into each free port of module, with interface recognized and configured automatically and BAC type/number defined by user. Interface functions contain stepwise handling of protocol layers, including bidirectional data transfer, allowing users to control interface target/identify faults.

W. L. Gore & Associates Cable & Assemblies
Landenberg, PA 19350
Oct 19, 2009 Fully compliant with SFF-8431 Revision 4.1 specification, 10 meter SFP+ Copper Cable Assembly can go 3-5 m longer than other passive options. Product uses GORE(TM) EYE-OPENER+® Conductor Technology and low-loss expanded PTFE cable dielectric, which balances waveform distortion penalty and voltage modulation amplitude parameters to achieve results within specification limits set forth by SFF-8431 committee. dWDP and VMA loss are 5.60 dBe and 3.95 dBe, respectively.

Belden
Richmond, IN 47375
Oct 07, 2009 To ensure optimal performance in extreme or mission-critical environments, Industrial Ethernet Cordsets and Patch Cords have individual insulated conductors bonded together along longitudinal axis for uniform conductor-to-conductor spacing. Cables are also chemical- and temperature-resistant and incorporate rugged RJ45 or over-molded M12, IP67-rated industrial connectors.

RF Industries
San Diego, CA 92126 4202
Aug 31, 2009 Suited for high frequency, critical applications, semi-rigid cable assemblies are manufactured using .047, .085, .141, and .250 dia cable to custom length requirements. Solid and conformable cable options are available with 2.9 mm, 7-16 DIN, N type, and SMA connectors. Interfaces include male for all cables with female and bulkhead female available for selected cables.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Jul 21, 2009 Comprised of outdoor rated fiber optic cable pre-assembled with outdoor rated PushPull LC connector, LC fiber optic cable assemblies achieve low loss over long distances with high data-carrying capacity. They feature 2-fiber multimode, wavelength of 850 and 1,310 Nm, and are immune to electromagnetic interference (EMI). IP65/IP67 rated, ready-to-install cable assemblies are offered in various lengths, as well as in single-ended versions.

Corning Cable Systems
Hickory, NC 28603-0489
Jun 29, 2009 Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

Optec Technology Limited
Kowloon   Hong Kong (prc)
Jun 24, 2009 Suited for demanding applications such as fiber-to-the-desk (FTTD), broadcasting, FTTx, and harsh environment networks, armored cable assemblies have stainless steel metal tubing within cable coating to protect fiber inside cable. Protective metal tubing also prevents damage from rodent bites. Product is available with choice of fiber connectors including LC, FC, SC, ST, MTRJ, and E2000, as well as type of polish including APC, UPC, and PC.

Wireworks Corp.
Hillside, NJ 07205
Jun 10, 2009 Available as single-channel cords and multichannel assemblies, TacCat products provide tactical CAT5e Ethernet interconnection in heavy-duty construction for on-the-road Ethernet and digital audio applications. Cords are available in standard lengths from 25-250 ft with Neutrik's etherCON data connectors or traditional RJ45 Ethernet connectors. TacCat multichannel assemblies, available with same choice of connectors, have 4 individual CAT5e cables in one outer jacket.

Cicoil Corp.
Valencia, CA 91355
Jun 03, 2009 Rated for over 10 million cycles in flexing applications, submersible ribbon cables are acid, alcohol, oil, ozone, steam and radiation resistant and have minimum bend radius of 0.4 in. Constructed using Ultra High Flex 28 AWG and tinned copper wire, cables meet NASA rating for space applications and UL-94 vertical flame standard for fire resistance. They operate in temperatures from -65 to +260°C.

Belden
Richmond, IN 47375
May 27, 2009 Designed to support Category 6 IBDN System 3600, DataTwist® 3600 Cables provide stable transmission characteristics and offer SNR that ensures error-free performance in LANs where noise and interference are high. These UTP copper cables, which meet and exceed TIA/EIA requirements, consist of 4 pairs of 23 AWG insulated copper conductors with round flexible core construction. Diameter and bandwidth properties enable high-density installations.

Meritec Div., Associated Enterprises
Painesville, OH 44077
May 20, 2009 Available in standard configurations in 30-24 AWG, Low Smoke Zero Halogen (LSZH) cable is used in Mini-SAS/SAS/SATA/InfiniBand®/and Ethernet CX4 external cable assemblies. Suited for green data-center and military applications, cable assemblies using LSZH cable meet or exceed electrical performance requirements of SAS 2.0 specification. PVC jacketed cable is also available as option.

Samtec, Inc.
New Albany, IN 47151 1147
May 15, 2009 Available with 26 or 52 total pins per bank, Q2(TM) Direct Termination Cable Assembly employs Q2(TM) Series 0.25 in. pitch high-speed sockets on both ends and 50 W single-ended routing via 36 AWG micro coax high-speed cable. Cable termination optimizes signal integrity by eliminating need for transition board. Compliant with RoHS, system mates with all QMS Series Q2(TM) terminal strips, including surface mount, edge mount, and right angle orientations.

RIA Connect
Tinton Falls, NJ 07112
May 14, 2009 Whether outdoors or exposed to chemicals and vibration found in factory settings, CAT 6A compliant X|Synergy provides IP67 level connection system between network cable and PCB. System utilizes edge-connector technology, which allows jack to become part of installation process, while providing self-alignment. Supporting gigabit Ethernet and 10 Gbit Ethernet, jack modules plug into edge-connector which resides on PCB, and is shrouded by metal shield for EMI protection.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
May 14, 2009 Low-Smoke Zero-Halogen (LSZH) Cable meets requirements of IEC 60332-1 for flammability, IEC 60754-1 and IEC 60754-2 for acid-gas generation, and IEC 61034-2 for smoke emission. Utilizing stranded copper conductors for flexibility, they are offered in unshielded, overall foil shielded, or individually foil shielded pairs. Cables are available with 300 V rating, meeting UL Type CM and CSA Type CMG FT4 standards, and operate in temperatures from -20 to +75°C.

Fujikura Europe Ltd, Fibre Optics Division
Chessington, Surrey KT9 2NY,  United Kingdom
May 08, 2009 Based on Easy Split bend-insensitive Ribbon Fibre, C-Groove Cable features C-shaped core that remains intact once outer coating is removed, enabling fibres to be removed from open face of C-groove. Four fibre ribbon inside cable can be separated into individual fibres in seconds using de-ribbonizing tool, eliminating need for mass fusion splicers and hot jacket strippers. Once desired fibres have been extracted, outer coating can be re-sealed by pressing cover back over cable.

Corning Cable Systems
Hickory, NC 28603-0489
May 01, 2009 Pretium® Low-Loss OM3 Jumpers with ultra-bend performance are high-bandwidth, laser-optimized cable assemblies featuring Corning® ClearCurve® multimode fiber, which confine modes of light to within fiber's core. Products are able to accommodate minimum bend radius of 8-10 mm, on 1.6-2.0 mm cable, with minimal bend-induced attenuation loss. They are suited for enterprise LAN and datacenter applications.

Electronic Assembly Manufacturing, Inc
Methuen, MA 01844
Apr 27, 2009 Available in standard and custom lengths, hand-formable cable assemblies can be bent into desired shape without tools and will retain that form with minimal memory effects. Signal losses are minimized via PTFE dielectric, and copper-tin composite outer conductor is used to achieve shielding effectiveness exceeding 100 dB. Typical insertion loss is 0.7 dB/ft @ 20 GHz for 0.141 in. dia cable, and typical VSWR is 1.13:1 @ 18 GHz. Various connector types are available.

Belden
Richmond, IN 47375
Apr 23, 2009 Offering integrated Power over Ethernet in single cable, IP Category 5e and Category 6 Unshielded Twisted Pair Cables come in riser- and plenum-rated versions and meet ANSI/TIA/EIA-568-B.2-2001 Standard. Category 5e cables feature 24 AWG solid bare copper conductors and are sweep tested to 100 MHz, while Category 6 cables feature 24 or 23 AWG solid bare copper conductors and are sweep tested to 250 MHz. All are available with black jackets.

Belden
Richmond, IN 47375
Apr 21, 2009 Able to be deployed in long cable runs for HD video (HD-SDI) or 1080p/60 applications, Brilliance 7732LL plenum-rated RG-11 precision digital video coaxial cable exhibits return loss of -23 dB from 5-1.6 MHz and -21 dB from 1.6-4.5 GHz. Cable features 14 AWG solid bare copper conductor, Duofoil + 95% Tinned Copper Braid Shield, PTFE insulation, and fluorocopolymer jacket. Applications include TV and video production as well as video editing, distribution, and duplication.