Corning Cable Systems
Hickory, NC 28603-0489
Jun 29, 2009 Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

Optec Technology Limited
Kowloon   Hong Kong (prc)
Jun 24, 2009 Suited for demanding applications such as fiber-to-the-desk (FTTD), broadcasting, FTTx, and harsh environment networks, armored cable assemblies have stainless steel metal tubing within cable coating to protect fiber inside cable. Protective metal tubing also prevents damage from rodent bites. Product is available with choice of fiber connectors including LC, FC, SC, ST, MTRJ, and E2000, as well as type of polish including APC, UPC, and PC.

Isilon Systems, Inc.
Seattle, WA 98119
Jun 23, 2009 Combining OneFS® v5.5 OS, 4 GBps Fibre Channel networking, 2 quad-core Intel® processors, and 8 GB RAM, Back-up Accelerator maximizes efficiency of file-based data back-up while minimizing risk of business-critical data loss. It delivers 480 MBps max performance across 4 concurrent streams and may be seamlessly added to any Isilon cluster. With this solution, enterprises can create scalable, shared pool of storage to unify data stores and reduce system complexity.

Advanced Anti-Vibration Components - AAC
New Hyde Park, NY 11040
Jun 19, 2009 Measuring 15.7 x 15.7 and 0.5-3 mm thick, V30Z62MCH Series is usable over temperature range of -40 to +392°F and offers thermal conductivity range of 1.8-6.5 Wm-k. Soft gel sheets provide electric insulation, and are both RoHS-compliant and UL-94 V-0 approved. Applications include computer internal components such as CPU, motherboards, power transformers, power supply equipment, and electronic parts such as semiconductors that produce heat.

Corsair Memory
Fremont, CA 94538
Jun 16, 2009 Supplied pre-filled and fully connected, Corsair Cooling(TM) Hydro Series H50 utilizes copper CPU cooling plate and integrated pump connected to 120 mm radiator and low-noise fan. Low permeability tubing virtually eliminates evaporation and leaking. Closed-loop system includes mounting brackets for both Intel LGA775 and Intel LGA1366 socket motherboards. Brackets for AMD socket AM2 and AM3 motherboards are also available.

Wireworks Corp.
Hillside, NJ 07205
Jun 10, 2009 Available as single-channel cords and multichannel assemblies, TacCat products provide tactical CAT5e Ethernet interconnection in heavy-duty construction for on-the-road Ethernet and digital audio applications. Cords are available in standard lengths from 25-250 ft with Neutrik's etherCON data connectors or traditional RJ45 Ethernet connectors. TacCat multichannel assemblies, available with same choice of connectors, have 4 individual CAT5e cables in one outer jacket.

Cicoil Corp.
Valencia, CA 91355
Jun 03, 2009 Rated for over 10 million cycles in flexing applications, submersible ribbon cables are acid, alcohol, oil, ozone, steam and radiation resistant and have minimum bend radius of 0.4 in. Constructed using Ultra High Flex 28 AWG and tinned copper wire, cables meet NASA rating for space applications and UL-94 vertical flame standard for fire resistance. They operate in temperatures from -65 to +260°C.

Nexus Technology
Nieuwerkerk aan den IJssel   Netherlands
Jun 03, 2009 Model TDD-9000 is soft black velvet blanket with gel-like liquid inside that is able to dissipate heat. When used with active laptop for 40 min, computer temperature is reduced by 17°C. For optimal cooling, pad should be lifted and shaken every 20 min. It can be folded and carried with laptop and will not scratch it.

Belden
Richmond, IN 47375
May 27, 2009 Designed to support Category 6 IBDN System 3600, DataTwist® 3600 Cables provide stable transmission characteristics and offer SNR that ensures error-free performance in LANs where noise and interference are high. These UTP copper cables, which meet and exceed TIA/EIA requirements, consist of 4 pairs of 23 AWG insulated copper conductors with round flexible core construction. Diameter and bandwidth properties enable high-density installations.

Meritec Div., Associated Enterprises
Painesville, OH 44077
May 20, 2009 Available in standard configurations in 30-24 AWG, Low Smoke Zero Halogen (LSZH) cable is used in Mini-SAS/SAS/SATA/InfiniBand®/and Ethernet CX4 external cable assemblies. Suited for green data-center and military applications, cable assemblies using LSZH cable meet or exceed electrical performance requirements of SAS 2.0 specification. PVC jacketed cable is also available as option.

Samtec, Inc.
New Albany, IN 47151 1147
May 15, 2009 Available with 26 or 52 total pins per bank, Q2(TM) Direct Termination Cable Assembly employs Q2(TM) Series 0.25 in. pitch high-speed sockets on both ends and 50 W single-ended routing via 36 AWG micro coax high-speed cable. Cable termination optimizes signal integrity by eliminating need for transition board. Compliant with RoHS, system mates with all QMS Series Q2(TM) terminal strips, including surface mount, edge mount, and right angle orientations.

RIA Connect
Tinton Falls, NJ 07112
May 14, 2009 Whether outdoors or exposed to chemicals and vibration found in factory settings, CAT 6A compliant X|Synergy provides IP67 level connection system between network cable and PCB. System utilizes edge-connector technology, which allows jack to become part of installation process, while providing self-alignment. Supporting gigabit Ethernet and 10 Gbit Ethernet, jack modules plug into edge-connector which resides on PCB, and is shrouded by metal shield for EMI protection.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
May 14, 2009 Low-Smoke Zero-Halogen (LSZH) Cable meets requirements of IEC 60332-1 for flammability, IEC 60754-1 and IEC 60754-2 for acid-gas generation, and IEC 61034-2 for smoke emission. Utilizing stranded copper conductors for flexibility, they are offered in unshielded, overall foil shielded, or individually foil shielded pairs. Cables are available with 300 V rating, meeting UL Type CM and CSA Type CMG FT4 standards, and operate in temperatures from -20 to +75°C.

NAPCO Security Group
Amityville, NY 11701
May 12, 2009 If alarm panel goes off, Veri-Phone takes control of phone line before connection with central station is lost, keeping dialog open between central station and customer's premise. Station operator can toggle back and forth between talk and listening or automate process using voice operated switch. Veri-Speaker multifunction speaker module contains siren, microphone, and 2-way voice speaker. It mounts via standard 4-conductor cable.

Fujikura Europe Ltd, Fibre Optics Division
Chessington, Surrey KT9 2NY,  United Kingdom
May 08, 2009 Based on Easy Split bend-insensitive Ribbon Fibre, C-Groove Cable features C-shaped core that remains intact once outer coating is removed, enabling fibres to be removed from open face of C-groove. Four fibre ribbon inside cable can be separated into individual fibres in seconds using de-ribbonizing tool, eliminating need for mass fusion splicers and hot jacket strippers. Once desired fibres have been extracted, outer coating can be re-sealed by pressing cover back over cable.

Corning Cable Systems
Hickory, NC 28603-0489
May 01, 2009 Pretium® Low-Loss OM3 Jumpers with ultra-bend performance are high-bandwidth, laser-optimized cable assemblies featuring Corning® ClearCurve® multimode fiber, which confine modes of light to within fiber's core. Products are able to accommodate minimum bend radius of 8-10 mm, on 1.6-2.0 mm cable, with minimal bend-induced attenuation loss. They are suited for enterprise LAN and datacenter applications.

Elma Electronic Inc.
Fremont, CA 94538
Apr 29, 2009 Aluminum based black anodized Elma front panel heat sinks dissipate heat while covering open sections of enclosure. Cooling fin extrusion has width of 42 HP and comes in 1U high increments. Each fin is built upon 1.5 HP pitch to leave enough space in between for screw heads. Heat sink front panels come in various sizes and configurations, but are specifically designed for 19 in. technology. EMC versions with mounting bracket for gaskets are also available.

GAO Tek Inc.
Toronto M1B2K4  Canada
Apr 28, 2009 Designed to meet various needs of device programming and IC testing, Model GAOVP480 features test vector capability, multi-array fuse map editor, device insertion and poor-pin-contact check. Portable unit automatically identifies TTL/CMOS logic IC, manufacturer, and type of programmable read-only memory.

Electronic Assembly Manufacturing, Inc
Methuen, MA 01844
Apr 27, 2009 Available in standard and custom lengths, hand-formable cable assemblies can be bent into desired shape without tools and will retain that form with minimal memory effects. Signal losses are minimized via PTFE dielectric, and copper-tin composite outer conductor is used to achieve shielding effectiveness exceeding 100 dB. Typical insertion loss is 0.7 dB/ft @ 20 GHz for 0.141 in. dia cable, and typical VSWR is 1.13:1 @ 18 GHz. Various connector types are available.

Belden
Richmond, IN 47375
Apr 23, 2009 Offering integrated Power over Ethernet in single cable, IP Category 5e and Category 6 Unshielded Twisted Pair Cables come in riser- and plenum-rated versions and meet ANSI/TIA/EIA-568-B.2-2001 Standard. Category 5e cables feature 24 AWG solid bare copper conductors and are sweep tested to 100 MHz, while Category 6 cables feature 24 or 23 AWG solid bare copper conductors and are sweep tested to 250 MHz. All are available with black jackets.