BEI Industrial Encoder Division
Goleta, CA 93117
Apr 23, 2009 Using SSI communications protocol at transmitter and receiver end, SwiftComm(TM) Wireless Interface allows critical position and speed feedback data to be seamlessly sent to control systems without cabling. Interface works with any SSI position device or other type of SSI sensor and provides built-in reliability needed for real-time industrial control. Transmitter-receiver pair communicates using point-to-point frequency-hopping 2.4 GHz RF protocol.

AnyDATA Corp
Irvine, CA 92612
Apr 14, 2009 With speeds to 3.1 Mbps (downlink) and 1.8 Mbps (uplink), DTP-500D CDMA module operates on EVDO Rev A 800 and 1,900 MHz wireless networks. It offers GPS/AGPS location capabilities, built-in TCP/IP stack, and USB 2.0 interface. Operating globally on tri-band UMTS 850/1900/2100 wireless networks as well as quad-band GSM/GPRS/EDGE 850/900/1800/1900 networks, DTP-600W HSPA module transmits data at 3.6 Mbps downlink and 384 kbps uplink rates. Both modules have mini PCIe 52-pin interface.

u-blox AG
Schweiz   Switzerland
Mar 20, 2009 Equipped with embedded TCP/IP stack and AssistNow client, LEON surface-mount GSM transceiver module supports GPRS class 10 as well as voice communications for emergency services. It can also operate together with GPS modules via I²C interface, allowing for interface of both modules via one single UART. Current consumption is 1.6 mA in standby mode and operating temperature is -30 to +85°C. Compact module measures 18.9 x 29.5 x 2.84 mm and has SMT pads on only 2 sides of package.

Proxim Corp
SunnyVale, CA 94086
Mar 20, 2009 Proxim Tsunami(TM) MP.11 HS (High Security) point-to-multipoint wireless broadband products, comprised of base stations and subscriber units, are certified with FIPS 140-2 Level 2 validation and offer AES-256 encryption as well as secure management. Covering 5.1-5.95, 4.9, 2.4, and 1.8 GHz frequency bands, products meet US Federal Government standards as well as HIPAA requirements for wireless video, data connectivity, VoIP, and mobility.

Avalan Wireless Systems Inc.
Palo Alto, CA 94303
Mar 16, 2009 Models AW900xTP and AW5800xTP ultra long range wireless Ethernet solutions enable Ethernet connectivity for fringe IP devices, including digital signage media players or digital billboard surveillance cameras. One radio pair can bridge 30 mile distance to deliver local content to outdoor digital signs through closed industrial wireless network, eliminating need to use cellular network.

Sena Technologies, Inc.
Seoul 137-130  Korea (south)
Mar 06, 2009 Parani-UD100 class 1 type Bluetooth USB adapter supports Bluetooth Specification 2.0+EDR (Enhanced Data Rate, making it suitable for industrial applications. Bluetooth driver CD is included and unit is also compatible with other SENA Bluetooth devices. Working distance can be extended up to 1,000 m with optional replacement antenna.

Spreadtrum Communications Corp.
Sunnyvale, CA 94085
Mar 03, 2009 Offered as dual-band TD-SCDMA and quad-band EDGE transceiver in 9 x 9 mm QFN64 package, QS3200 provides 2G/2.5G/3G/3.5G multimode support as well as support for TD-SCDMA/HSDPA/EDGE/GPRS/GSM standards. It exceeds 3GPP TS 25.102 requirements and is optimized to meet demands of small form factor cellular handsets. Along with HSDPA/HSUPA and front-end component support, features include SPI control interface, analog I/Q and LVDS interfaces for TD system, and analog I/Q for GSM system.

Redpine Signals, Inc.
San Jose, CA 95131-2019
Feb 26, 2009 Based on Lite-Fi(TM) 802.11n technology, SenSiFi(TM) module (RS9110-N-11-31) provides all control and standards-compliant WLAN functionality with WPA2 security required to build and deploy wireless sensor nodes. It can collect full range of telemetry information through standard A/D sensor interfaces, and MCU implements embedded OS. Supplied in 31 x 44 mm QFN package, self-contained module also includes network stack that terminates TCP/IP and UDP connections with IPv6 capability.

Bluegiga Technologies, Inc.
Hingham, MA 02043
Feb 12, 2009 Bluegiga WT11 Class 1 and Bluegiga WT12 Class 2 OEM Bluetooth modules use CSR silicon and run iWRAP Bluetooth connectivity firmware. Bluetooth Health Device Profile (HDP) is available for integration within latter, reducing need for engineering and testing time for any type of health or medical device. Specifically, HDP helps device manufacturers develop wireless features into existing or new devices with minimal effort.

MadgeTech
Warner, NH 03278
Feb 06, 2009 PRTemp1000 is available with BTIF1000 accessory, which provides secure Bluetooth® wireless link between data logger and Pocket PC. Rated IP67 for use in wet or underwater environments, accessory allows for wireless in-the-field downloading using Pocket PC software. Its one-button operation facilitates downloading and restarting. Currently only for use with PRTemp1000, BTIF1000 will support additional data loggers in future and is not for use with intrinsically safe data loggers.

Ethernet Direct
Newark, DE 19702
Jan 28, 2009 Fully compliant with ZigBee specification 2.4G IEEE 802.15.4, Zebra ZUZ-110 and ZUZ-111 are converters that work as host and slave in transmission frequency range of 2.405-2.480 GHz and provide 16 channels. They support RS-232, RS-485, and Ethernet, and offer wireless transmission range up to 100 m. DIN Rail mountable units employ power saving technology, reverse polarity protection, over current protection, and surge (EFT) protection.

RF Monolithics, Inc.
Dallas, TX 75244
Jan 21, 2009 TRC104 short-range RF Integrated Circuit transceiver radio delivers typical receiver sensitivity of -95 dBm at 250 Kb/s data rate and -90 dBm at 1 Mb/s data rate. When transmitting at its maximum data rate of 1 Mb/s, unit operates with 13 mA at 0 dBm TX supply current, 18.6 mA RX supply current, and 400 nA sleep current of power consumption. Product features both digital and analog RSSI, and is available in 4 X 4 mm TQFN-24 package.

Semtech Corp.
Newbury Park, CA 91320
Jan 07, 2009 Operating from 0.8-1.7 V supply, SX1282 employs 8-bit CoolRISC® processor core, with DSP H/W acceleration, that can deliver up to 6.4 MIPS while drawing less than 1.3 mA of supply current. Dual UHF-band ISM transceivers, also included, enable simultaneous communication on 400 and 800 MHz ISM bands. Additional features include analog sensor front-end interface, 1-32 kB of low-power RAM, and variable 10- to 16-bit ZoomingADC (analog-to-digital converter).

Laird Technologies
Chesterfield, MO 63017
Jan 05, 2009 Designed for data applications, BTM411 is subminiature Bluetooth data-oriented module, based on BC04 chipset, that provides UART interface and AT command set to interface host processor. Model BTM520 offers 32-bit Kalimba DSP, running at 64 MIPS, allowing on-board implementation of advanced applications. It features high-gain, multi-layer ceramic antenna providing +10 dBm output. Both are based on v2.1+EDR Bluetooth standard and support operating temperatures from -30 to +70ºC.

Laird Technologies
Chesterfield, MO 63017
Jan 05, 2009 Designed for data applications, sub-miniature Model BTM410 supports serial port profile, and provides UART interface and AT command set to allow interface to host processor. Model BTM420 supports HCI interface and is pre-approved as Bluetooth Controller Sub-system, while BTM510, intended for audio and multimedia applications, offers support for A2DP, AVRCP, HFP, and HSP profiles. For power multimedia applications, BTM520 includes high-gain, multilayer ceramic antenna with +10 dBm output.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Dec 04, 2008 Capable of reading and writing 13.56 MHz RFID tag formats, DL990 uses Bluetooth (Class Two) technology to upload tags' ID to computers/PDAs in real-timee. Reading range is 6 cm, and device continuously reads tags for up to 6,000 times per charge. Palm-sized reader measures 82 x 52.3 mm and is compatible with devices running with WinCE 5.0 or Windows Mobile 5.0/6.0. Applications include security, patrol, mining, finance, and railway system industries.

Laird Technologies - EMI
St. Louis, MO 63045
Dec 02, 2008 Incorporating pre-approved Bluetooth stacks, Bluetooth® standard, Version 2.1+EDR based modules minimize design effort to implement short range wireless in medical devices. Based on BC04 chipset, model BTM411 fully integrated, sub-miniature Bluetooth data-oriented module provides UART interface and comprehensive AT command set for interface to host processor. Series BTM520 suits medical products that require DSP applications, provides +10 dBm output, and features 32-bit Kalimba DSP.

Phoenix Contact
Harrisburg, PA 17111 0100
Dec 01, 2008 Using 1 W, FHSS transceiver, Model RAD-ISM-900-EN-BD brings Ethernet or serial data onto IP-based networks from remote locations, even in high-interference environments. It incorporates selectable 128/192/256-bit AES encryption to prevent unwanted intrusion, while multiple wireless communication streams allow simultaneous Ethernet, I/O control, and serial ASCII device communications. Operating in 902-928 MHz ISM band, radio can be configured using any network PC.

Digi International
Minnetonka, MN 55343
Nov 24, 2008 Provide up to 40 km of RF line-of-sight (LOS) transmission, XBee-PRO® 868 embeddable RF modules suit machine-to-machine (M2M) applications in challenging terrain or long-range environments. Solutions also facilitate migration to other XBee solutions, including 900 MHz and 2.4 GHz options. Providing 500 mW of EIRP, modules have receive sensitivity rated at -112 dBm and offers multiple antenna options as well as over-the-air configuration, strong 128-bit AES encryption.

Callpod, Inc.
Chicago, IL 60607
Nov 21, 2008 Manufactured from die-cast zinc and high-impact polycarbonate, plug-and-play Drone(TM) Adapter seamlessly switches between Bluetooth headsets and headphones and can connect to any PC or Mac via USB port. Users can transfer data to and from computer via iPhone, Palm Treo, or any other Bluetooth cell phone or PDA. In addition to Skype and other VoIP applications, device supports Bluetooth photo printers and cameras, enabling user to transfer and print photos.