connectBlue Inc.    Chicago, IL 60601
May 15, 2013 Features such as WLAN dual-band functionality and omnidirectional, 11 cm, external stub antenna with RPSMA connector enable RWE251s to be used in 2.4 and 5 GHz ISM bands and flexible placement. Based on WLAN IEEE 802.11 a/b/g/n (Wi-Fi), IP65-rated and ready-to-use adapter operates from -30 to +65°C and offers user seamless roaming and redundancy. It suits industrial/medical applications where Ethernet cable needs to be replaced with wireless connection.

Broadcom Corp.    San Jose, CA 95110
May 14, 2013 Optimized for power-intensive Ethernet network applications, 40 nm BCM54290 Series features AutoGrEEEn® Plus technology, which extends energy savings to legacy MACs and non-EEE devices. Technology can be deployed when device is in Energy Efficient Ethernet mode communicating with EEE link partner or when linked to non-EEE enabled device. In addition to precision 1588 time synchronization, multi-port devices provide Y.1731 latency performance monitoring and 1 ns 1588 PTP time stamp resolution.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 09, 2013 Bluetooth® low energy advanced remote control kit enables direct control of Bluetooth Smart Ready devices, such as PCs, laptops, and tablets devices. Also, solution enables Bluetooth Smart devices to configure advanced remote control solution OTA. Pin-to-pin and SoC digital domain compatibility between CC253x ZigBee technology and CC254xBluetooth low energy SoC enables manufacturers to complement ZigBee® RF4CE remote designs with Bluetooth low energy technology.

Laird Technologies    Chesterfield, MO 63017
Apr 30, 2013 Based on Nordic Semiconductor nRF51822 SoC, BL6000 Bluetooth Smart™ Modules support variety of ultra-low power saving modes to achieve as little as 1 µA power consumption in deep sleep mode and 10.5 mA when transmitting data at 0 dBm. Each BL600 module version – with integrated antenna, IPEX MHF4 antenna connector, or trade pads for external antenna – has 19 x 12.5 mm footprint. Modules can connect to external sensors via I2C, SPI, UART, ADC, and GPIO interfaces.

Ethertronics, Inc.    San Diego, CA 92121
Apr 08, 2013 EtherDAS 1.5™ and EtherDAS S™ can achieve passive intermodulation (PIM) performance of -153 dBc in all 2G, 3G, and 4G bands – from 700 MHz to 2.7 GHz. While EtherDAS 1.5 provides Voltage Standing Wave Ratio (VSWR) spec of <1.5:1 for optimum impedance match, EtherDAS S employs proprietary technique to shape antenna's radiation pattern and thereby optimize wireless coverage within building. Both products come in N connector, DIN connector, and 500 mm pigtail with N connector versions.

GAO FiberOptics Inc.    Toronto   Canada
Apr 05, 2013 Compliant with IEEE802.3/.3u/.3x standards, model C0330003 – 6-Port 10/100Base-Tx and 2-Port 100Base-Fx fiber Ethernet switches – utilizes STAR network topology and has six 10/100M UTP ports and two 100M SFP sockets. Product converts 10/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet fiber signals and features MAC self-learning function, automatic MDI/MDI-X configuration function, as well as IEEE 802.3x full-duplex and back pressure half-duplex flow control.

GreenPeak Technologies    Utrecht   Netherlands
Mar 28, 2013 Supplied in 32-pin, 5 x 5 mm package, GP501 contains coexistence scheme that allows Wi-Fi, Bluetooth, and ZigBee chips to work side-by-side in same device, successfully avoiding RFI when operating simultaneously. Coexistence interface enables arbitration over shared radio frequency medium prevents contention, signal degradation, and data loss. Security-aware Deep Packet Inspection (DPI) engine, also included, allows deep sleep modes of STBs and other host devices via Wake-on-LAN messages.

Bluegiga Technologies, Inc.    Hingham, MA 02043
Mar 21, 2013 Along with hardware I²C interface that facilitates connectivity to MEMS peripheral sensors, BLE113 offers on-board application hosting, flexible peripheral interfaces, and low-power sleep modes. Bluetooth v4.0, single mode-compliant module can host custom applications, and Bluegiga Bluetooth Smart SDK allows applications to be developed for BLE113 with Bluegiga BGScript™ scripting language. Product supports master and slave modes and up to 8 connections.

Atmel Corporation    San Jose, CA 95131
Mar 06, 2013 As 2.4 GHz IEEE 802.15.4 radio transceiver, AT86RF233 supports distance measurement between 2 radios (ranging). Integrated technology, combining wireless sensor networks with real-time location (RTLS) capabilities, uses measurement of phase differences between radio signals and enables items to be tracked within wireless network for industrial and consumer applications.

Nordic Semiconductor ASA    Oslo 0213  Norway
Feb 28, 2013 With 128 kB Flash memory, nRF51822 Bluetooth® low energy and proprietary 2.4 GHz SoC offers pin-to-pin compatibility with 256 kB nRF51822 as to allow drop-in replacement. Solution offers multiprotocol radio and 32-bit ARM Cortex-M0 based processor optimized for ultra low power (ULP) wireless applications. Part also delivers -92.5 dB RX sensitivity in Bluetooth low energy mode; up to +4 dBm output power in all modes; and sub-10 mA peak currents running off 3 V coin cell battery.

API Technologies Corp.    South Plainfield, NJ 07080
Feb 22, 2013 Replacing case-based solutions, SST™ Secure Communications Hub (SCH) SB1500ER provides both 3G or satellite connectivity and high grade (Type 1 equivalent) IP encryption. Single device integrates accredited data transmission (Mini-CATAPAN® encryption) and data at rest (Eclypt® drive in Laptop) products for secure mobile solution, and 3 red-side LAN ports enable use as secure communications hub. For unplugged tactical use, SCH can operate on battery power.

Safety Technology International    Waterford, MI 48327
Dec 06, 2012 Upon actuation, Wireless Doorbell Button (STI-34600) sends radio signal to included 4-channel receiver in order to provide remote notification of someone at front or back door. Water- and weather-resistant product, which supports 500 ft max range (line of sight) between transmitter and receiver, is supervised for battery and signal reception. Various STI wireless alerts are available.

Radiometrix Ltd.    Watford Hertfordsh WD19 5EZ  United Kingdom
Nov 21, 2012 Bi-directional control device, BL118, uses half duplex radio transceiver to establish 2-way wireless link for remote control applications. Radio link operates continuously, providing valid communication link indication; boards are used in pairs, master/initiator and slave/responder; and relays are activated when state of input on one board changes and vice-versa. With 10 mW BiM1-173.225-10 module fitted, average current consumption is 1 mA (relay off), achieving 500+ m open-field range.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 06, 2012 Combining 5 wireless functions into 24.6 x 18.0 x 3.0 mm package, LBEL6Z2TXC helps designers simplify end-designs and conserve board space. Wireless combination module, targeting automotive applications, utilizes AEC-Q100 compliant chipset and supports WLAN, Bluetooth, and Bluetooth Low Energy (BLE) communications in addition to providing FM radio receiver and GPS receiver. Operating from -40 to +85°C, module offers UART, PCM, SDIO, I²S, and audio interfaces.

Saelig Co., Inc.    Pittsford, NY 14534
Oct 03, 2012 With eRA-Arduino-S900 shield, Arduino boards can communication wirelessly with other eRA module-equipped Arduino boards or PC hosts, using proprietary easyRadio technology operating in 915 MHz ISM band. Host Arduino boards can send and receive up to 180 bytes of half-duplex data per packet, seamlessly delivered to all other hosts within range. Measuring 2.7 x 2.0 x 0.4 in., shield is powered by host Arduino’s 5 V, consuming 25/35 mA in idle/transmit.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Sep 26, 2012

Operating from -40 to 85°C and offering standard HCI interface to host CPU, Model SN2100 is suited for industrial control and monitoring applications. Unit features 18 dBm transmit power output, receive sensitivity of -92 dBm, and transmission coverage up to 800 ft. Measuring 17.5 x 16.0 x 2.0 mm, module combines TI Bluetooth IC CC2450A, power amplifier, RF front end, TCXO, and chip antenna into LGA form factor. On-module 32 kHz slow clock helps minimize implementation time.

Peraso Technologies Inc    Toronto   Canada
Sep 24, 2012 Supplied in 7 x 7 x 0.6 mm package with integrated antennas, PRS1021 targets such emerging mobile applications as multi-gigabit wireless I/O and HD wireless display. Tx power consumption is 310 mW at 16.5 dBm EIRP, and Rx power consumption of 270 mW. Exhibiting sub-millisecond latency, transceiver is fully compatible with WiGig v1.1 and Draft IEEE 802.11ad specifications at PHY data rates in excess of 2.5 Gbps. Performance supports all WiGig PALs, including WSE.

Phottix    Kwun Tong   Hong Kong (prc)
Aug 27, 2012 Featuring transmitter and receiver modes, Atlas II is capable of triggering flashes at sync speeds up to 1/250 sec. System will trigger cameras, flashes, and studio lights at distances of 350 m or more. With 2-stage shutter button, half-press will autofocus and full press will take photo. Atlas II includes 4 channels and 2-color status LED as well as hot shoe port and 2 sync ports for attaching flashes and strobes.

TP-LINK Technologies CO., LTD.    Shenzhen 518057  China
Aug 13, 2012 Connecting desktop computer to wireless network, TL-WDN4800 lets users access high-speed wireless network connection. This adapter complies with IEEE 802.11a/b/g/n and can access 2.4 or 5 GHz channels to provide wireless speeds to 450 Mbps. While 3 antennas optimize wireless performance and stability, features such as WPA/WPA2 encryption ensures secure wireless connection. Adapter supports 32- and 64-bit versions of Windows® 7/Vista/XP.

Freewave Technologies, Inc.    Boulder, CO 80301
Aug 13, 2012 Enabling data links to pass secure encrypted data on real-time basis, Spartan Series is suited for government and defense applications, including command and control of unmanned systems. Radio systems feature up to 32 unique crypto keys, remote capability to zeroize individual or all keys, NSA Suite B algorithms, and ability to upgrade to DS-101 key loading interface. Configurations include: 2.4 GHz Serial, 2.4 GHz Ethernet, 1.3 GHz Serial, 1.3 GHz Ethernet, and 225-400 MHz Serial.