Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 12, 2009 Integrating 12-bit ADCs, DACs, RF-receive and RF-transmit signal chains, and on-chip frequency synthesizers, Models AD9356 and AD9357 support 2.3-2.7 GHz and 3.3-3.8 GHz ranges, respectively, covering existing WiMAX bands and channel bandwidths of 3.5, 4.375, 5, 7, 8.75 and 10 MHz. Signal-to-noise ratio provides support for picocells and microcells from +13 dBm to +36 dBm output power at antenna port, while smart-partitioning architecture supports autonomous AGC, TPC, and calibration routines.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Aug 05, 2009 Model MRF24J40MB adds +20 dBm transmit power via integrated power amp and -102 dBm receive sensitivity via integrated Low Noise Amplifier (LNA) to IEEE 802.15.4-compliant transceiver, PCB antenna, and discrete matching circuitry. On software side, certified ZigBee PRO protocol stack provides another option for IEEE 802.15.4-based wireless networks using 16-bit PIC® MCUs. Combination of ZigBee PRO stack and MRF24J40 forms ZigBee PRO Compliant Platform certified by ZigBee Alliance.

L-Com, Inc.
North Andover, MA 01845
Aug 05, 2009 Featuring 135° horizontal beam-width for wide coverage in indoor WLAN systems, HG2405SD-135 series HyperLink antennas can be used in 2.4 GHz, 5 dBi IEEE 802.11b/g/n applications. Antennas, measuring 3.2 x 6.2 x 2.2 in., use UV-stable white ABS radome and feature dual independent dipole radiating elements for spatial diversity. Also, units can be installed for vertical or horizontal polarization and are available in multiple configurations of cable length/connector type.

Radicom Research
San Jose, CA 95131
Jul 31, 2009 Model V92HU is module-only, 1.0 x 1.0 x 0.25 in. device, while V92MB-U, at 1.0 x 2.5 x 0.75 in., includes RJ-11 jack and USB type B receptacle. Approved to various telecom, safety agency, and medical protocols, both work with Linux, Windows, and Mac. They feature built-in DSP and incorporate EMC/EMI shielding, hardware controller, data pump, and international DAA. Operating at data rate from 300 bps to 56 Kbps, units support V.92 analog data, V.44 data compression, and 14.4 Kbps fax.

RLE Technologies
Fort Collins, CO 80524
Jul 29, 2009 Equipped with 418 and 900 MHz radio receivers, FDS-Wi receives signals from transmitters sensing temperature, humidity, motion, power, dry contact, analog (4-20 mA), 0-5 Vdc, and 0-10 Vdc signals, and integrates them to facilities monitoring systems in form of SNMP, Modbus TCP/IP, Modbus RTU, and BACnet/IP. Device can receive signals within 30.48 m of open air space with 418 MHz frequency and up to 402.34 m of open air space with 900 MHz frequency.

Navman
Foothill Ranch, CA 92610-2807
Jul 22, 2009 Designed for in-vehicle use, commercial-grade Model M-Nav 750 enables fleet drivers to receive dispatch instructions, view maps to next stop, and send messages back to office on one mobile unit. Relevant maps and turn-by-turn directions are displayed automatically when driver accepts job. Based on SirfStarIII GPS, unit includes 4.3 in. anti-glare touchscreen, routing based on truck attributes, and driver ID functionality for automated reporting of drivers' hours, speed, and mileage.

K-Tek
Prairieville, LA 70769
Jul 06, 2009 Enabling transmitting of data between process sensors/DCS or SCADA systems, DX80 Wireless Transmitter and Receiver includes wireless transmitter node accepting up to 2 analog and 2 discrete switch inputs. Including wireless receiver gateway that accepts up to 55 nodes, system has embedded site survey tool which analyzes strength of radio signal between gateway and specified node. Housed in IEC IP67, NEMA 6 rated enclosure, product offers line of sight range of 3 miles.

Harris Corp.
Rochester, NY 14610
Jun 29, 2009 Packaged in standard military-hardened handheld form factor, Model RF-7800T delivers high-resolution, full-motion tactical video to individual warfighters for real-time intelligence, surveillance, and reconnaissance (ISR). Portable, ground-based remotely operated video enhanced receiver (ROVER) accepts video captured by military's fleet of unmanned aerial vehicles. Operating in 1.71-1.81 GHz L-band, unit also supports 2.2-2.5 GHz S-Band and 4.4-5.8 GHz C-Band.

Circuit Design, Inc.
Nagano 399-8303  Japan
Jun 23, 2009 Programmed with 4 channels, transmitter Model CDP-TX-05M-R and receiver Model CDP-RX-05M-R feature narrowband FM 25 kHz channel spacing and operating temperature of -20 to +65°C. Using TCXO as reference oscillator circuit of radio component ensures frequency stability. With output of 10 mW authorized for narrow band FM and double superheterodyne receivers with receive sensitivity in European harmonized ISM band, communication range of 600 m line-of-sight is possible.

QinetiQ North America
McLean, VA 22102
Jun 23, 2009 TALON 2-way hailer provides encrypted wireless audio communications between TALON robot and operator up to 2,600 ft away line-of-sight. Controlled via portable, wearable control unit, system allows conversations to be conducted at 4 volume levels and includes 120 dB siren. Clip-on handset broadcasts and receives audio to and from robot and auxiliary input can be connected to MP3 player or laptop computer for playback of recorded messages or music.

Bosch Security Systems
Fairport, NY 14450 9199
Jun 19, 2009 Featuring redial function and easily accessible address book, PS-Transceiver offers programmable push-to-talk speech function that lets user speak to individuals or group of people simultaneously. Unit comes with manual and automatic alarm functionality, location detection, and text/voice communication. It is designed for easy message reading and handling with reversible top display for hands-free reading.

Phonak Communications AG
Murten   Switzerland
Jun 17, 2009 Intended for small teams of mobile professionals, Condor System is comprised of palm-sized radio unit, discrete under-the-shirt wiring, and user's choice of Phonak headset. License-free system allows up to 6 colleagues to communicate at distances up to 800 m in full-duplex mode while additional colleagues listen in via same closed network. Condor does not require base station and is therefore 100% mobile.

RTX Telecom A/S
Noerresundby 9400  Denmark
Jun 17, 2009 Based on SiTel chipsets SC14450 and LMX4180, DECT/CAT-iq 2.0 USB dongle supports CAT-iq 1.0/2.0 features, 4 audio lines via USB interface, DECT 6.0, and firmware updates via USB as well as utilizes existing Windows/Linux drivers. Unit enables developers to add cordless telephony to VoIP-enabled broadband gateways, IP PBXs for SMB applications, wired IP telephones, set-top boxes, and PCs. Included SDK simplifies host integration of dongle support.

Broadcom Corp.
Irvine, CA 92618
Jun 12, 2009 Combining Wi-Fi and Bluetooth chips in half mini-card, InConcert® BCM94312HMGB, BCM943225HMB, and BCM943224HMB Modules enable PC manufacturers to add wireless features to notebooks, Netbooks, and ultra-mobile PCs. All modules utilize BCM2070 Bluetooth 3.0 + High Speed transceiver and feature coexistence algorithms to maximize Wi-Fi and Bluetooth throughput when both radios are operating concurrently. Single antenna system is used for both Wi-Fi and Bluetooth transmissions.

ApaceWave Technologies
Fremont, CA 94538
Jun 08, 2009 Designed using 65 nm process in 9 x 9 mm package, APW2050 Mobile Station SoC supports all 802.16e mobile WiMAX Wave 2 features, including MIMO Matrix A/B and Beam Forming, as well as advanced release-1.5 DL/UL AMC MIMO capability. Integrated PHY, MAC, embedded CPU, and intelligent power management minimize total system power consumption. Supported by mobile station software, SoC enables WiMAX solutions for devices such as laptop computers, mobile Internet devices, and CPEs.

GAO FiberOptics Inc.
Toronto   Canada
Jun 02, 2009 Protocol-independent 10G-XEANPK-LR compatible transceivers operate at wavelength of 1,310 nm, are designed for 10 Gb/sec SONET/SDH, Fibre Channel, Ethernet gigabit, and 10 Gb Ethernet. Targeted at MMF applications, units are Cisco and Foundry compatible. XFP transceivers offer wide variety of 10 Gb Ethernet connectivity options for operation in data centers, enterprise wiring closets, and services providing transport applications.

Motorola, Inc.
Schaumburg, IL 60196 4041
Jun 02, 2009 Centrally managed for policy enforcement, 802.11n Wireless Enterprise Branch Office Solution features adaptive triradio AP-7131 access points with 24/7 wireless intrusion prevention system. Firewall and 3G/4G backhaul capabilities are also included. System can adapt around interference and device/WAN failures and offers asset tracking and remote network monitoring/troubleshooting. It is controlled via RFS6000 or RFS7000 wireless switches supporting thousands of remote 802.11abgn APs.

Honeywell
Golden Valley, MN 55422 3935
Jun 01, 2009 Approved for hazardous areas, STXW 500 and STTW 401 convert any measurement device with contact-closure switch input into wireless input. Products can transmit signals from up to 3 contact switches; STXW 500 accepts 3 discrete/digital inputs, while STTW 401 accepts thermocouple input and 2 discrete/digital inputs. Both work under OneWireless(TM) industrial wireless mesh network and are suited for applications such as monitoring level switches, pump status, and system alarms.

Meraki Networks, Inc.
Mountain View, CA 94041
May 29, 2009 Meraki Enterprise Wireless LAN system includes Meraki Enterprise Cloud Controller which offers Web-based management tools, automatic RF planning, 802.1x authentication, as well as ability to create multiple virtual-LANs on single physical network. Multiple geographically distributed networks can be managed from central location. Single-radio MR11, capable of 300 Mbps, and dual-radio MR14 access points, at up to 600 Mbps, are also included. System suits businesses with 50-5,000 employees.

Digital Monitoring Products
Springfield, MO 65803
May 22, 2009 Two-input wireless transmitter 1103 combines internal reed switch, on-board terminal block for contact wiring, and end of line resistor. Both internal and external contacts can be programmed to operate simultaneously, yielding 2 independent zones from one transmitter. Built-in survey capability for one-person installations is provided by on-board LED, eliminating need for external survey kit. Unit includes lithium ion battery and hardware pack and is available in white plastics.