Wireless Communication Equipment

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Test & Measuring Instruments

Wireless Modules enable mobile bin level data monitoring.

April 27, 2016

BinCom modules enable SmartBob sensor to send data to BinView Web application to provide instant access to bin level data on any device with Internet connection. Smartphones, tablets, or PCs can be used to remotely acquire data regarding all bin level measurements from local and corporate-wide locations. Powered by battery, solution features wireless technology and cellular data transfer. Cloud-based BinView application is accessible by authorized users using secure login credentials. Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Bluetooth® Smart Modules target IoT-related devices.

April 6, 2016

Measuring 9.6 x 12.9 x 2.0 mm and 5.1 x 11.3 x 1.3 mm, respectively, Models EYSHCNZXZ and EYSHJNZXZ are compatible with Bluetooth® v4.2 low energy standard. Devices feature ARM® Cortex®-M4 processor with floating point arithmetic functions and 64 kB RAM. Operating from -25 to +75°C, modules are suited for various small, thin devices including healthcare equipment, wearable devices, and smartphone peripherals, as well as IoT-related devices. Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Low-Power BLE Modules suit space-constrained applications.

April 4, 2016

Increasing battery life for small form factor (SFF) applications, SmartConnect XR and ZR Bluetooth Low Energy (BLE) connectivity modules consume <4 mA in RX and <3 mA in TX with 3.6 V and <1.2 µA in sleep mode. Available package options include 4.5 x 5.5 mm LGA with 40L and 7.5 x 10.5 mm with 34 pins and ground paddle. All modules integrate SmartConnect BTLC1000 solution, ULP Bluetooth SMART SoC with SMART ARM® Cortex®-M0 MCU, and Bluetooth transceiver. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Mechanical Power Transmission

FCC-Certified 4G/LTE Amplifier increases in-building coverage.

March 31, 2016

Promoting increased connectivity within buildings/structures, HA72170-NF can capture weak cellular signal and strengthen it to provide clear calls and fast, consistent data speeds while also reducing dropped calls. This 4G/LTE booster can wirelessly connect >25 mobile devices and works with 2G/3G/4G networks on U.S. cell carriers. While AGC enables consistent coverage, integral LED control console lets user set operational mode, select band, and adjust gain of each frequency. Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Bluetooth Low Energy Modules extend range and key feature support.

March 21, 2016

Extending range of Bluetooth® to 400 m, EZ-BLE&trade; PSoC® XT/XR opens up use of Bluetooth connectivity to home automation, industrial, and smart city applications. Solution occupies 9.5 x 14.5 mm, 32-pad footprint and operates from -40 to +105°C. Also available, EZ-BLE PRoC&trade; CYBLE-222014-01, which is drop-in compatible with Cypress 128/256 KB flash memory Bluetooth 4.1 modules, enables all 3 key features of Bluetooth 4.2 standard: data length extension, privacy, and security. Read More

Communication Systems & Equipment, Electronic Components & Devices

Future Electronics Promotes EZ-BLE PSoC Modules and PMICs from Cypress

March 16, 2016

Pointe Claire, Quebec - Future Electronics, a global leading distributor of electronic components, has announced immediate shipping availability of EZ-BLE PSoC Modules and PMICs from Cypress. The EZ-BLE PSoC Module from Cypress is a fully integrated, fully certified, 11 x 11 x 1.8mm, programmable, Bluetooth Smart or Bluetooth Low Energy (BLE) module designed for ease-of-use, and reduces... Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Wireless Communication Module is Bluetooth SMART compatible.

March 1, 2016

Featuring Bluetooth® SIG certification, MK71050-03 integrates LAPIS Semiconductor&#39;s ML7105 wireless communication IC with 16 kB EEPROM, 26 MHz XO for master clock, and pattern antenna. Connection with host MCU is made via SPI, while commands and data format unique to LAPIS Semiconductor are implemented using 3 dedicated terminals: IRQ pin, WAKEUP pin, RF Active pin. Design has FCC certification in USA, construction design certification in Japan, and European compliance with R&TTE Directive.<br /> Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices, Optics & Photonics

Wireless Power Transmitter IC delivers 15 W.

February 25, 2016

Combined with host microcontroller, Model TC7718FTG realizes wireless power transmission system compliant with Qi&trade; v1.2 wireless charging standard for mobile and industrial charging applications. Electromagnetic induction transmitter IC integrates full-bridge gate driver, LDO regulator with 3.3 V output, and low-pass filter for recovery of amplitude shift keyed signal. Housed in P-VQFN36 package, device handles input voltages from 4.5&ndash;25 V with operating frequency from 110&ndash;205 kHz. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices, Optics & Photonics

Transmitter/Receiver optimize wireless power conversion efficacy.

February 24, 2016

Compatible with WPC Qi standard, integrated transmitter (P9240A) and receiver (P9220) chips offer wireless charging solution for electronics demanding up to 15 W output. Power conversion efficiency is >86%. Whereas P9240A suits standalone applications and features proprietary slew rate control, P9220 is designed for products that require high-current charging and incorporates active internal rectifier and output LDO with support for all mainstream communication interface protocols. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics, Transportation Industry Products

Wireless HD Video Link enhances drone transmission reliability.

January 27, 2016

CONNEX mini, available for smaller, lighter aerial drones, delivers full 1080p HD video at 60 fps with zero latency over ranges up to 1,600 ft. While 65 x 45 x 15 mm, 40 g transmitter unit mounts on drone, 100 x 71 x 18 mm, 140 g receiver unit may be mounted on drone remote control. Further features include AES 128 encryption for secure transmission, multicast reception for up to 4 receivers, as well as telemetry and control solutions for S-bus, CANBUS, and PPM drone controllers. Read More

Communication Systems & Equipment, Electronic Components & Devices

Wi-Fi/Bluetooth Combo Chip extends battery life.

January 7, 2016

Intended for mobile platforms and accessories, Model BCM43012 enables OEMs to integrate Wi-Fi into applications that have traditionally been powered by Bluetooth alone due to battery size or constrained power budgets. Highly-integrated 28 nm dual-band 802.11n and Bluetooth 4.2 SoC combines power amplifiers, low noise amplifiers, and power management unit. WLAN features include optimized proximity and location functions enabled by 802.11mc and TurboQAM® data rates up to 96 Mbps. Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Bluetooth® Smart Beacon targets IoT applications.

December 23, 2015

Featuring 20 m transmission range, Model FWM8BLZ02 can be paired with existing or OEM-developed Internet of Things applications for complete, wireless beacon solution. Customers can use text-based, over-the-air configuration mode to load existing protocols or to define and change custom protocols, operating parameters, and advertising data. Packaged in 40.0 x 31.0 x 12.0 mm plastic case, beacon is powered by CR2450 coin-cell battery and is based on Fujitsu&rsquo;s MBH7BLZ02 Bluetooth Smart module. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices

Surface Mount IR Receivers operate over -30 to +85°C range.

October 22, 2015

In SMT Belobog package with 0.8 mm profile and 150° angle of sensitivity, TSOP37xxxE, TSOP57xxxE, and TSSP57xxxE Series support -40 to +110°C storage and have rated floor life of 168 hr per MSL 3. These products, suited for outdoor applications exposed to daily temperature variations/extremes, have no lens and retain 85% of on-axis sensitivity at off-axis angle of 45°. To simplify designs, receivers offer photo detector and preamplifier circuit in single epoxy package.<br /> Read More

Communication Systems & Equipment, Electrical Equipment & Systems

ETL Systems Launches New RF Technologies for Broadcasters Ahead of IBC 2015

September 15, 2015

Developments to StingRay RF over Fibre and L-Band Switch Matrix ranges to be showcased alongside the new Piranha LNB power supply unit Madley, UK. – ETL Systems, a global designer and manufacturer of RF distribution equipment for satellite communications, today announced it has further enhanced its successful RF over Fibre range, StingRay. The new developments – which will be on... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

LTE Access Points offer secure connection and network scalability.

September 11, 2015

Designed for enterprise and industry vertical IoT solutions, EZ LTE Off-the-Shelf smart eNodeB indoor/outdoor access points provide broadband carrier grade connectivity for private networks. Solution offers network scalability and connects securely to any private IP network behind Enterprise firewall or Private/Public/Hybrid Clouds. Delivering LTE QoS and security, solution is powered by Lemko 5G networking software featuring virtualized, distributed EPC and IMS managed on cloud. Read More

Communication Systems & Equipment, Controls & Controllers

Magnetek to Exhibit Full Line of Wireless Controls at ICUEE 2015

September 9, 2015

MENOMONEE FALLS, Wis. - Magnetek, Inc., a leading provider of digital power and motion control systems, will be exhibiting at the International Construction Utility Equipment Exposition 2015, in Louisville, KY, September 29 – October 1. Visitors to the Company’s booth, 1824, will be able to experience Magnetek’s full line of wireless controls, including the new Flex Mini and Mini-PGT... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

Mission-Critical Communications Radio covers 4.4-5.9 GHz range.

July 29, 2015

Offering deployment flexibility and sustainability, PTP 700 covers 4 GHz NTIA/NATO bands and 5 GHz unlicensed spectrum for federal, industrial, and public safety deployments. This point-to-point wireless broadband solution is available as Connectorized Radio or Connectorized+Integrated Radio. Latter allows for antenna selection at time of deployment. Capable of line of sight and non-line of sight operation, radio offers up to 450 Mbps throughput and has 124 mile max range. Read More

Communication Systems & Equipment, Electronic Components & Devices

Compact Bluetooth Module enhances health, fitness devices.

July 21, 2015

Supplied in 52-pin, 10.7 x 13.6 x 1.78 mm package, MK71050-03 integrates EEPROM for program storage, crystal oscillator for system clock, and pattern antenna. Level of integration eliminates need for circuit adjustments for wireless communication. In addition to being certified to comply with all applicable radio laws and regulations in Japan, North America, and Europe, this Bluetooth Smart-compatible 2.4 GHz wireless module carries Bluetooth SIG certification. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Green & Clean

Moxa Sponsors Stevens Institute of Technology in U.S. Department of Energy's Solar Decathlon

July 6, 2015

SURE HOUSE™ Inspired by Hurricane Sandy BREA, CA - Moxa is proud to sponsor Stevens Institute of Technology as it competes in the U.S. Department of Energy's Solar Decathlon 2015, an award-winning program that challenges collegiate teams to design, build, and operate solar-powered houses that are cost-effective, energy-efficient, and attractive. Moxa will provide its industrial... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Optics & Photonics

Compact 2.4 GHz Radio Tranceiver employs DSSS and 2 antennas.

June 3, 2015

Allowing channel switching according to preset channel plan, 1.6 x 1.15 x 0.22 in. STD-503 facilitates embedding of wireless capabilities in industrial remote control equipment. Radio communication reliability in 2.4 GHz ISM band is ensured via use of noise-resistant direct-sequence spread spectrum (DSSS) modulation as well as true diversity receiver design employing 2 antennas. Transmitting data at up to 19.2 kps, module achieves low power operation of 10 mW using 3.3 V 65 mA supply.<br /> Read More