Audio Distribution Amplifiers

Communication Systems & Equipment, Mechanical Power Transmission, Electronic Components & Devices

Distribution Amplifiers (1.2 GHz) are DOCSIS 3.1 compliant.

May 16, 2014

AC1500 distribution and A2500 distribution trunk amplifiers ensure that downstream frequency band reaches up to 1.2 GHz and upstream is upgradable to 200 MHz. Both can be equipped with Remote Ingress Switching (RIS) system that allows ingress detection and countermeasures at headend. For management feature diversity, amplifiers can also be equipped with intelligent transponders with measuring capabilities as well as programmable signal and ingress monitoring. Read More

Communication Systems & Equipment, Mechanical Power Transmission, Electronic Components & Devices

GaAs Distributed Driver Amp offers positive gain slope, low noise.

March 28, 2014

Supplied in Pb-free, RoHs-compliant, 5 x 5 mm, SMT package, CMD192C5 wideband GaAs MMIC distributed amplifier operates from DC to 20 GHz and has positive gain slope versus frequency. This allows for cascading of multiple amplifiers without requiring extra gain compensation circuitry. Driver amplifier, which delivers >19 dB of gain with corresponding output of 1 dB compression point of +25 dBm, has 50 Ω matched design and low noise figure of 1.9 dB at 10 GHz. Read More

Communication Systems & Equipment, Mechanical Power Transmission, Electronic Components & Devices

MMIC Driver Amplifier delivers +20 dBm of output power.

March 13, 2014

Featuring frequency range of 1–24 GHz, Model CMD197 offers 16 dB of flat gain with corresponding output 1 dB compression point of greater than +20 dBm and output IP3 of greater than +30 dBm across entire bandwidth. Distributed GaAs driver amplifier includes on-chip bias choke and 50 Ω port matches. Fully passivated for moisture protection, Model CMD197 is suited for military and space applications, wideband communication systems, microwave radio, VSAT, and test instrumentation. Read More

Communication Systems & Equipment, Electronic Components & Devices

Repeater and Distribution Amplifier optimizes surveillance.

September 26, 2013

Designed for HD CCTV video in security systems, SD/HD/3G-SDI 1 to 2 Repeater and Distribution Amplifier works by receiving SDI input directly from one surveillance system and then duplicating it across company's entire network. Unit re-transmits 4 SDI outputs for real-time multi-viewing across separate devices. Supporting data transmission rates up to 1.485 Gbps, solution provides seamless surveillance for active protection of key infrastructure points. Read More

Communication Systems & Equipment, Mechanical Power Transmission, Electronic Components & Devices

Distributed and Drive Amplifiers have all-positive bias scheme.

May 7, 2013

Respectively operating from DC to 30 GHz and 2–30 GHz, distributed amplifiers CMD164 and CMD165 deliver >12 dB of gain with output 1 dB compression point of +15 dBm and noise figure of 2.4 dB at 10 GHz. Operating from DC to 20 GHz, distributed amplifier CMD173 delivers >15 dB of gain with output 1 dB compression point of +18 dBm and noise figure of 2 dB at 10 GHz. Driver amplifier CMD166 operates from 20–40 GHz with 9 dB of gain and output 1 dB compression point of +17 dBm. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Non-Industrial Products

Passive 3D Viewing Kit targets professional A/V market.

September 19, 2011

Based on video scalers with Geometry Correction and Edge Blending, Image AnyPlace-3D creates fully immersive, passive 3D viewing that can be scaled to fit any projection screen size and accommodate any number of viewers. Passive system utilizes separate and simultaneous polarization for each eye for comfortable viewing experience. Kit includes 2 signal processors, HDMI distribution amplifier, HDMI cables, polarizing filters and glasses, IR remote control, and rack mounts. Read More

Communication Systems & Equipment, Electronic Components & Devices

Distribution Amplifier switches 2 sources to multiple HDTVs.

March 22, 2010

Designed to work as splitter for all HD video applications, Model AT-HD-V214 features 2 HDMI 1.3 inputs and 4 HDMI 1.3 mirrored outputs, allowing any digital video source with HDMI outputs to connect to upwards of 4 simultaneous HD displays. HDCP-compliant device can send HD signals at resolutions up to 1080p or 1,920 x 1,200 and data rates up to 6.75 Gbps, with no signal or picture degradation. Control options include front panel, RS232, and IR remote. Read More

Communication Systems & Equipment, Electronic Components & Devices

Distribution Amplifier works as VGA video splitter.

October 16, 2009

Providing 1 VGA input and 16 VGA outputs, Model AT-VGA116 is capable of splitting any signal from 1 VGA source to 16 separate displays with compatible VGA inputs simultaneously. Device allows cascading of up to 24 units to meet any AV application. With max bandwidth of 1 GHz, splitter will support highly defined video in multiple resolutions up to 2,048 x 2,048. Applications include store video displays, education and worship facilities, and digital signage. Read More

Communication Systems & Equipment, Electronic Components & Devices

HD/SDI Distribution Amplifiers suit broadcast applications.

July 9, 2009

Available with support for SDI and HD-SDI standards, 1 x 4 splitter AT-SDI-14, 1 x 4 splitter with re-clocking AT-SD-14RC, 1 x 6 splitter AT-SDI-16, and 1 x 6 splitter with re-clocking AT-SDI-16RC take single input and distribute signal perfectly to 4 or 6 identical outputs. Re-Clocking technology helps buffer and cascade long distance transmissions to send signal over 1,000 ft with resolutions up to 1,080p and full bandwidth up to 1.48 Gbps. Models also support audio. Read More

Communication Systems & Equipment, Electronic Components & Devices

Distribution Amplifier delivers full HD output to 4 displays.

April 18, 2008

Designed for home theaters and public HD display kiosks, 3x4 HDMI V1.3 Switch and Splitter Distribution Amplifier distributes full 1080p video streams to 4 HD displays simultaneously via HDMI. RS-232 serial port provides integration with 3rd party control systems, while 3x1 HDMI switching allows up to 3 separate HD sources to be selected. Unit processes HDMI data and outputs audio via Toslink Audio while leaving HDMI signals (both audio/video) available to both HDMI outputs. Read More

Communication Systems & Equipment, Electronic Components & Devices

HDMI Distribution Amplifier targets electronic retailing.

January 16, 2008

With Pro HD 3x8 HDMI Distribution Amplifier, users can deliver full 1,080P HD video and audio streams to 8 HD displays simultaneously. Unit is fully scalable and distributes HDMI to more than 8 HD displays by cascading multiple units. Integrated 3x1 HDMI switching allow up to 3 separate HD sources to be selected. Configurable to fit in 1 RU rack or as tabletop installation, unit includes RS-232 serial port for integration with 3rd party control systems. Read More

Communication Systems & Equipment, Electronic Components & Devices

HDMI Amplifier comes with dual outputs.

September 11, 2007

Designed for Dual Display Theater systems, 1x2 HDMI Distribution Amplifier allows users to simultaneously show same HD video and audio on 2 displays at full 1,080p resolution. Digital Toslink Audio output couples audio data from HDMI data stream. Unit processes HDMI data and outputs audio via Toslink Audio while leaving HDMI signals available to both outputs. Users can integrate amplifier with pre-existing surround sound audio equipment that has no HDMI audio ability. Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics

Optical Distribution Amplifiers handle video/audio/data signals.

May 27, 2003

Pure Digital Fiberlink® 8000 and 8100 Series transmit 1-4 and 2-12 channels, respectively, of any combination of video, audio, and data signals from one-way Pure Digital Fiberlink Transmitters. They transmit to multiple one-way Pure Digital Fiberlink Receivers without degradation to quality of original baseband signals. Both series can receive signals over multimode or single mode fiber at wavelengths of 850, 1310, or 1550 nm. Read More

  • 1