austriamicrosystems AG
Premstatten   Austria
Feb 13, 2009 Designed to promote battery life in active tags, AS3932 fully programmable 3D wake-up receiver covers carrier frequency range of 110-150 kHz, including 125 kHz band, and offers wakeup sensitivity of 100 µVRMS (typ). Its 3 independent receiving channels enable detection of wakeup signal from any direction, and received data can be correlated with pattern programmed in register to prevent false wakeups. Wakeup without pattern detection is also supported.

Telegent Systems
Sunnyvale, CA 94085
Jan 27, 2009 With power consumption and integration levels suitable for laptops, netbooks, and mobile internet devices, TLG2300 single-chip CMOS hybrid TV receiver supports digital (DVB-T) and analog (PAL/SECAM/NTSC) TV and FM radio. It integrates RF tuner, demodulator, decoder, audio/video processing, FM stereo radio, and USB 2.0 interface in less than 4.25 cm² of board space while delivering video sensitivity and picture quality with margin to key NorDig specifications.

Cirrus Logic, Inc.
Austin, TX 78744
Jan 09, 2009 CS8422 Series 24-bit, 192 kHz digital audio receiver incorporates low-jitter PLL and integrated asynchronous sample rate converter, which supports digital audio sources of different sample rates. Supporting input/output ratios from 6:1 and 1:6, CS8422 provides transparent conversion with 140 dB dynamic range and -120 dB THD+N performance. Input multiplexer supports up to 4 S/PDIF or 2 differential AES3 audio inputs, receiver to transmitter pass-through, and TDM mode for automotive applications.

NEC Electronics
Santa Clara, CA 95050
Dec 26, 2008 Designed for tuners that enable viewing of digital terrestrial broadcasts on analog televisions, EMMA(TM)2TS system-on-chip incorporates Full SegNote OFDM channel decoder compliant with Japanese Integrated Services Digital Broadcasting-Terrestrial (ISDB-T)standard. It also includes MPEG2 decoder, image display, video/audio D/A converter, and smartcard interface. SOC suppresses power consumption to approximately 1 W.

Microtune, Inc.
Plano, TX 75074
Dec 19, 2008 Measuring 7 x 7 mm, MicroTuner(TM) MT2067 is engineered to provide stable TV reception in vehicles traveling at top speeds. Dual-conversion tuner supports RF frequency range from 48-862 MHz, and worldwide analog and digital terrestrial standards including NTSC, PAL, SECAM, DVB-T, DVB-H, ISDB-T, DTMB, ATSC, and ATSC-M/H. Spur-avoidance technology prevents interference between tuners, while ClearTune(TM) filter technology limits interference from undesired channels.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Nov 24, 2008 Single-chip CC430 combines 16-bit MSP430F5xx MCU and low-power RF transceiver, drawing low enough current to enable battery-operated wireless networking applications that operate without requiring service for 10 years or longer. Available intelligent digital and analog peripherals, via MCU, include 16-bit ADC and low-power comparators that also accelerate design by integrating functions such as AES accelerator. On-chip LCD controller is offered as additional choice.

Comarco Wireless Technologies, Inc.
Lake Forest, CA 92630-8870
Nov 19, 2008 Fully programmable, scanning receiver solution supports simultaneous measurements of multiple technologies in Advanced Wireless Services (AWS) bands from 2,110-2,170 MHz as well as 850 and 1,900 MHz bands. It supports simultaneous scanning of multiple technologies and includes algorithmic features that enhance W-CDMA and CPICH scan rates in all bands. Respectively, scan rates for 16 CPICH, GSM, CDMA, and RSSI are 10 ms, 728 channels/sec, 33.3 ms/512 PNs, and 300 channels/sec.

Atlona Technologies
San Jose, CA 95131
Nov 17, 2008 AT-HD19SS, combined with AT-HDRS, form expandable solution for routing HD video and audio to multiple remote displays. AT-HD19SS units take HD video at resolutions up to 1080p over a HDMI 1.2a connection, and extend signal over single CAT5/5e/6 cable up to 200 ft. At each display end, cable is connected to AT-HDRS receiver units that feature adjustable equalizer, which ensures signal quality with no degradation. System can be cascaded, allowing for infinite number of display locations.

Agilent Technologies, Inc
Santa Clara, CA 95051
Nov 07, 2008 With data-acquisition speed of 400,000 data points/sec simultaneously on each of its 5 receiver channels, PNA-X Measurement Receiver features optional Fast-CW mode that enables 500-million-point data buffer. It offers receiver dynamic range of 134 dB at 10 Hz IFBW, point averaging mode for reducing trace noise, and 10.4 in. touch-screen display with zoom and click-and-drag markers. Other features include Open Windows XP OS, 8 USB connectors, LAN and 2 GPIB, and TTL I/O control port.

Anadigics, Inc.
Warren, NJ 07059
Nov 03, 2008 Developed for use in CATV/HDTV tuners, and PC TV tuner cards, AIT1042 maintains high linearity and low noise over wide gain control range, which is adjustable up to 40 dB at RF input and up to 45 dB in IF amplifier. Operational from single +5 V supply, 1 GHz tuner generates 78 dB of gain while converting 50-1,000 MHz RF input signal to 35-50 MHz IF output. Device features upconverter with RF gain control, downconverter, IF amplifier with gain control, 2 VCOs and dual synthesizer.

Low Power Radio Solutions Ltd.
Oxon   United Kingdom
Oct 21, 2008 Intended for wireless-enabled industrial products, CDP-TX-02E-R and CDP-RX-02E-R come in shielded cases, offer narrow-band FSK modulation, and are resistant to noise. High-sensitivity (-120 dBm) receiver ensures stable operation, even in weak signal fields, and line-of-sight communication distance exceeds 600 m with 10 mW power output. Resistant to mechanical vibration and shock, radio modules run at 457 MHz and enable RF to be selected from 32 pre-programmed channels in 25 kHz steps.

Melexis Inc.
Concord, NH 03301
Sep 29, 2008 Featuring operating temperature range of -40 to 105°C, MLX71122 multi channel, frequency-agile receiver IC suits applications in unlicensed ISM and SRD frequency bands at 300-930 MHz. It accepts supply voltages from 3-5.5 V with typical current consumption of 11 mA and standby mode current draw of below 50 nA. Available in 32 lead QFN package with footprint of 5 x 5 mm, IC offers input sensitivity of -112 dBm for ASK and -107 dBm for FSK signals, respectively.

Circuit Design, Inc.
Nagano 399-8303  Japan
Sep 11, 2008 With narrow band FSK modulation, CDP-TX-02E-R and CDP-RX-02E-R Radio Modules are resistant to noise and achieve line-of-sight communication distance of more than 600 m with only 10 mW power. Radio frequency can be selected from 32 pre-programmed channels in 25 kHz steps, or by setting arbitrary frequency channel. Operating from -20 to +60°C, modules are designed for embedding in industrial equipment and are suitable for indoor and outdoor use.

Amino Communications LLC
Alpharetta, GA 30022
Aug 15, 2008 Designed to facilitate installation for HD IPTV services, AmiNET130M only offers HDMI as method of connection to TV. Solution supports MPEG-4 decoding technology and lets service providers deliver end-to-end digital HD TV as multicast or on-demand, multi-room video experience. Measuring 4.48 in. wide x 1.37 in. high, STB addresses growing segment of market focused on HD services and flat screen TVs.

Larco
Brainerd, MN 56401-0547
Aug 04, 2008 Offering 12 Vac, 24 ac/dc, and 12 Vdc capabilities, 433 MHz Wireless Automatic Door Control Receiver is compatible with all available automatic door controllers. Measuring 4¼ x 2¼ in., it employs code hopping-technology, and features activation time of 1.5 sec up to 4 hr and memorization of codes for up to 12 transmitters. With optional security layers, receiver makes it impossible to duplicate codes and restricts automatic door access to only activated key fobs.

Micrel Semiconductor Inc.
San Jose, CA 95131
Aug 01, 2008 Series SY54xxx includes 7 low voltage CML output products with core power supply of 2.5 V that can interface directly to devices powered by 1.2/1.8 V supply. Products include 1:2 fanout buffer, differential line driver/receiver, 2:1 multiplexer, and 2 x 2 crosspoint switch. AC performance is guaranteed from dc through 2.5-3.2 GHz or 3.2 Gbps, with rise and fall times of less than 95 ps. Jitter performance is less than 10 ps p-p over temperature and voltage.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Jul 08, 2008 Designed for cable set-top box and digital cable ready TV applications, Model S510075-33Z out-of-band tuner consists of input automatic gain control amplifier, mixer, and AGC video amplifier. It offers 3.3 V single supply operation, low distortion of -50 dBc at 1 VPP, 70 dB total conversion gain, 55 dB total gain control range, and low LO to RF leakage. Unit is housed in compact, 3 x 3 mm, 16-lead, RoHS compliant QFN package, and consumes 300 mW of power.

Silicon Laboratories
Austin, TX 78727
Jul 02, 2008 Applying digital decoding techniques and leveraging digital low-IF architecture, Si4706 and Si4749 offer 8 µV EMF sensitivity with 5% block error rate in low-signal environments. Si4706 utilizes tuned resonance technology for embedded antennas and provides audio out for GPS-enabled mobile devices. AEC-Q100 qualified Si4749 offers full suite of received signal quality metrics for RDS alternate frequencies including RSSI, SNR, adjacent and alternate blockers, and frequency offset.

Anadigics, Inc.
Warren, NJ 07059
Jun 30, 2008 Designed for CATV set-top boxes, DVRs, PC TV tuner cards, and other tuner-on-board applications, AIT1032 1 GHz tuner incorporates upconverter, downconverter, VCO, synthesizer, RF and IF amplifier, and RF and IF gain control functions. It provides two 45 MHz IF outputs (1 analog, 1 digital), and operates from single +5 V supply. Offered in 7 x 7 x 1 mm 48-pin SMT, unit features single RF input that contains low noise amplifier with 35 dB of gain control range.

Endwave Corporation
San Jose,, CA 95134
Jun 17, 2008 Targeting short-range indoor communications that must transport data traffic at multi-gigabit speeds, 60 GHz T/R module allows full-duplex operation with flexible modulation and can also be operated in various radar modes. It features receiver noise figure of 5 dB and transmitter output power (at P1 dB) of over +5 dBm with ±1.0 dB flatness over 2 GHz operating bandwidth. Measuring 3½ in. in length, transceiver includes independent Tx and Rx local oscillators and programmable phase lock loops.