Microtune, Inc.
Plano, TX 75074
Oct 27, 2009 MicroCeiver(TM) IC, suited for digital and cable TV products, is RF-to-baseband solution that will enable digital TV front-end receivers that support multi-standard off-air and cable TV reception and next-generation digital standards. Internal algorithms continually optimize key functions across receive chain, allowing high-quality demodulated output. It also enables signal status reporting, which feeds signal information for every condition across receiver path to maximize performance.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Oct 20, 2009 Supplied in 32-pin, 5 x 5 mm QFN package, sub-1 GHz CC11x1-Q1 Series transmitters, receivers, and transceivers have RF design and SPI that eliminate need for external filters or switches. Devices allow migration from unidirectional to bidirectional systems and support operation up to +125°C. They help designers build reliable data links with fast frequency hopping scheme (88 µs switching time) utilizing fractional-N concept, and data rate is programmable from 1.2-250 kBaud.

Hemisphere GPS
Alberta T2G 3C4  Canada
Oct 06, 2009 Designed to work with TDS Nomad(TM) handheld GIS data collection device, XF102 records raw GPS data for post-processed mapping or survey-grade positioning accuracy. Device includes rugged, maintenance-free smart antenna and Compact Flash adapter, and offers fast start-up and reacquisition times. Unit supports SBAS differential corrections and e-Dif® extended differential option, and if receiver temporarily loses differential signal, COAST(TM) technology maintains accuracy for up to 40 min.

MaxLinear Inc.
Carlsbad, CA 92011
Sep 24, 2009 Utilizing digital CMOS process-based technology, MxL20xRF tuners integrate channel filtering and on-chip 94 dB gain to deliver high-quality signal reception of weak signals. They consume 400 mW of power, complying with Energy Star standards in standby and operating modes. At 5 x 5 mm, units can be implemented on 2-layer PCBs and do not require provisions for thermal management. Tuners support digital cable standards in North America, China, Europe, and India.

Siano Mobile Silicon
Beijing 100005  China
Sep 16, 2009 In addition to DVB-T, T-DMB, and ISDB-T standards, Model SMS1230 supports DAB and DAB+ digital radio technologies as well as analog FM radio. Highly integrated, all-CMOS single chip receiver enables reception of DVB-T at speeds of 200 km/hr and exhibits immunity to analog and digital signal interference. Combination of two SMS1230 units operating together supports antenna diversity, which further optimizes reception performance.

STMicroelectronics
GENEVA   Switzerland
Aug 18, 2009 Able to simplify designs, STV4100 is supplied in 5 x 5 mm QFN package, eliminates need for up to 30 separate components, and does not require any adjustment. Single-chip DVB-T silicon tuner combines with ST demodulator and decoder ICs to deliver complete set-top box chipset. It meets all DVB-T standards, including DTG, Nordig Unified v2.0, and Digitenne, and has operating current of 600 mA that minimizes power consumption in STBs, iDTVs, PC-TV receivers, and DVD/Blu-ray recorders.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 17, 2009 Receiving signals in FM, VHF-III, UHF, and L-band spectrums, MAX2169 operates in either zero-IF mode for DVB-H and ISDB-T or in low-IF mode for DAB and T-DMB. It operates from 2.7 V supply, consuming 130 mW when receiving ISDB-T 13-segment signals, while power consumption in L-band mode is 110 mW. Available in 6 x 6 mm, 40-pin TQFN package, it includes on-chip tracking and low-pass filters. Unit is specified over -40 to +85°C temperature range.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 10, 2009 Model MAX7036 superheterodyne receiver integrates self-contained PLL block; 400 kHz IF filter with RSSI; and analog baseband, data-recovery circuitry. Operating over -40 to +105°C temperature range from 3.3 or 5 V power supply, it offers sensitivity of 109 dBm and draws less than 1 µA in shutdown mode and 5.5 mA in receive mode. Power-down pin puts unit in low-current sleep mode and automatic gain control circuit reduces LNA gain by 30 dB when input signal power is large.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 16, 2009 Supplied in 11.25 x 15 mm LGA package, LTM9003 wideband RF-to-digital receiver subsystem includes 12-bit, 250 Msps ADC, bandpass filter, IF amp, and RF downconverting mixer. IC reduces board space and development time for wireless basestations implementing PA linearization with digital predistortion (DPD). Included 125 MHz bandpass filter exhibits less than 0.5 dB passband ripple, and noise floor of receiver chain is -147.3 dBm/Hz. Absolute delay through filter is 2.7 ns.

K-Tek
Prairieville, LA 70769
Jul 06, 2009 Enabling transmitting of data between process sensors/DCS or SCADA systems, DX80 Wireless Transmitter and Receiver includes wireless transmitter node accepting up to 2 analog and 2 discrete switch inputs. Including wireless receiver gateway that accepts up to 55 nodes, system has embedded site survey tool which analyzes strength of radio signal between gateway and specified node. Housed in IEC IP67, NEMA 6 rated enclosure, product offers line of sight range of 3 miles.

Circuit Design, Inc.
Nagano 399-8303  Japan
Jun 23, 2009 Programmed with 4 channels, transmitter Model CDP-TX-05M-R and receiver Model CDP-RX-05M-R feature narrowband FM 25 kHz channel spacing and operating temperature of -20 to +65°C. Using TCXO as reference oscillator circuit of radio component ensures frequency stability. With output of 10 mW authorized for narrow band FM and double superheterodyne receivers with receive sensitivity in European harmonized ISM band, communication range of 600 m line-of-sight is possible.

Endwave Corporation
San Jose,, CA 95134
Jun 18, 2009 Operating over frequency spectrum of 71.0-86.0 GHz, E-band TX/RX module pair is designed for broadband point-to-point radios carrying voice and data traffic at multigigabit/sec rates. System features conversion gain of 15 dB and output power of 16 dBm along with power detector on TX output. Supporting modulation formats ranging from on/off keying to 16 QAM modulation, pair also includes on-board micro-controller for software controlled compensation.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jun 12, 2009 Housed in 11.25 x 15 mm LGA uModule® package, Model LTM9002 combines dual 14-bit ADC sampling up to 125 Msps, anti-aliasing filters, fixed gain differential ADC drivers, and 12-bit trim DACs. Dual IF/baseband receiver subsystem achieves 90 dB isolation at 140 MHz input frequency. Overall gain is typically 26 dB and varies less than 0.1 dB between 2 channels. Utilizing multi-layer substrate, package shields sensitive analog lines from digital traces to minimize digital feedback.

Teseq, Inc.
Edison, NJ 08837
Jun 04, 2009 Able to be configured as single- or 4-channel click meter, 30 MHz PMM 9010 offers flexible measurement parameters on frequencies up to 6 GHz that meet all current industry testing standards. It uses A/D conversion and DSP to eliminate aging of critical parts that could degrade measurement accuracy and provide stable performance. Modular unit shows all click details and mandatory reporting parameters in real-time with reports generated via included PC software.

ComNet
Danbury, CT 06810
Jun 01, 2009 Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center.

Ascom (Sweden) AB
Göteborg SE-402 76  Sweden
Apr 28, 2009 Providing simultaneous multi-band and multi-mode RF measurements, Long-Term Evolution Scanner supports LTE baseband scanning in 700 MHz bands while supporting EvDO scanning of 850/1,900 MHz bands. Software-Defined Radio solution is fully programmable and provides both received signal strength indication and technology-specific baseband decoding. Featuring out-of-band signal rejection, RoHS-compliant scanner is suited to carriers deploying 4th generation broadband wireless data networks.

Berkeley Varitronics Systems
Metuchen, NJ 08840-1217
Apr 22, 2009 Gazelle(TM) modular, high-speed, digital scanning receivers exceed distance-based averaging required to meet 40 lambda criteria essential for critical propagation analysis. System utilizes high-speed bus that can house up to 4 independent receiver modules, which simultaneously log RF energy needed to plot out coverage maps. Solution is suited for pre-build-out that provides analysis for more advanced modulated systems utilizing WiMAX or LTE technologies.

Agilent Technologies, Inc
Santa Clara, CA 95051
Apr 20, 2009 Housed in weatherproof IP67-rated enclosure, Model N6841A is a software-defined, network-based receiver that monitors signals over frequency range of 20 MHz to 6 GHz using 14-bit ADC to accurately digitize signals with 20 MHz information bandwidth. Unit's 512 MB signal capture memory buffer follows ADC and signal processing. Receivers may be synchronized via GPS receiver or network interface, providing measurement synchronization and time-stamping of measurement data.

ELCA Srl
Mussolente 36065  Italy
Mar 31, 2009 Offering frequency band of 868.0125-869.9875 MHz with up to 24 different possibilities, MITO is designed to work with recovery vehicles, winches, small cranes, and other industrial applications. System consists of IP67 protected transmitter and receiver, internal lithium battery, and battery charger. Listen Before Transmit feature allows unit to automatically scan, find, and lock onto clear and available frequency by pressing start button.

SiPort Corporation
Santa Clara, CA 95054
Mar 27, 2009 Featuring tuner, baseband, and DC-DC converters on one die, SP1010(TM) single-chip HD Radio(TM) receiver enables Digital Radio and Digital Data Services from terrestrial broadcasts to high-volume devices such as mobile handsets and MP3 players. Power consumption is 100 mW for entire HD Radio sub-system, RF performance and interference rejection is maximized in all operating modes, and DSP optimizes baseband performance. Software-programmable configuration enables multi-standard reception.